← Commit history
README.md+10−11
@@ -2,7 +2,7 @@  **STMicroelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4 -LDL1117S30R from STMicroelectronics, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+LDL1117S30R from STMicroelectronics, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout @@ -11,7 +11,6 @@ LDL1117S30R from STMicroelectronics, in a SOT-223-4. Pinout and pin descriptions | 1 | GND | power_in | Ground reference (0 V). | | 2 | VOUT | output | Regulated output voltage terminal, maximum output current 1.2 A, typical dropout voltage 350 mV at 1.2 A. | | 3 | VIN | power_in | Input voltage terminal, operating range 2.5 V to 18 V, absolute maximum -0.3 V to 20 V. |-| 4 | TAB | passive | Thermal pad connected to output voltage (VOUT) for heat dissipation. |  ## Key specifications @@ -20,7 +19,7 @@ LDL1117S30R from STMicroelectronics, in a SOT-223-4. Pinout and pin descriptions | Manufacturer | STMicroelectronics | | Package | SOT-223-4 | | Category | Power Management (PMIC) |-| Pins | 4 |+| Pins | 3 |  ## Electrical characteristics @@ -29,14 +28,14 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---| | Operating input voltage | VIN | 2.6 |  | 18 | V |  | 6 |-| Turn-on threshold (UVLO) | VUVLO | 2.3 |  | 2.4 | V |  | 6 |+| Turn-on threshold | VUVLO | 2.3 |  | 2.4 | V |  | 6 | | VOUT accuracy | VOUT | -2 |  | 2 | % | IOUT = 10 mA, TJ = 25 °C | 6 |-| VOUT accuracy | VOUT | -3 |  | 3 | % | IOUT = 10 mA, -40 °C < TJ < 125 °C | 6 |-| Line regulation | ΔVOUT |  | 0.002 | 0.02 | %/V | VOUT + 1 V ≤ VIN ≤ 18 V, IOUT = 10 mA, -40 °C < TJ < 125 °C | 6 |-| Load regulation | ΔVOUT |  | 5 | 15 | mV | IOUT = 10 mA to 1.2 A, -40 °C < TJ < 125 °C | 6 |+| VOUT accuracy | VOUT | -3 |  | 3 | % | IOUT = 10 mA, -40 °C < TJ < 125°C | 6 |+| Line regulation | ∆VOUT |  | 0.002 | 0.02 | %/V | VOUT + 1 V ≤ VIN ≤ 18 V, IOUT = 10 mA, -40 °C < TJ < 125 °C | 6 |+| Load regulation | ∆VOUT |  | 5 | 15 | mV | IOUT = 10 mA to 1.2 A, -40 °C < TJ < 125 °C | 6 | | Dropout voltage | VDROP |  | 350 | 600 | mV | IOUT = 1.2 A, VOUT > 2.5 V, -40 °C < TJ < 125 °C | 6 | | Quiescent current | IQ |  | 250 | 500 | µA | IOUT = 0 mA to 1.2 A, -40 °C < TJ < 125 °C | 6 |-| Output current (short-circuit limit) | ISC | 1.5 | 2 |  | A |  | 6 |+| Output current | ISC | 1.5 | 2 |  | A |  | 6 | | Input supply voltage | VIN | -0.3 |  | 20 | V |  | 5 | | Output voltage | VOUT | -0.3 |  |  | V | Upper limit printed as VIN + 0.3 V | 5 | | Operating junction temperature | TJ-OP | -40 |  | 125 | °C |  | 5 |@@ -48,7 +47,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries ## CAD (KiCad official)  - Symbol: `LDL1117S30R`-- Footprint: `Package_TO_SOT_SMD:SOT-223`+- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2` - 3D model: SOT-223-4 (KiCad packages3D, STEP) - 3D model files: `ldl1117s30r-etched.step` / `ldl1117s30r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ldl1117s30r.step` / `ldl1117s30r.glb` are the bare package body. @@ -56,8 +55,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943098260951040) (23 pp, sha256 `ffbb9e03f7f6d0c4`, retrieved 2026-09-23, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943098260951040) (23 pp, sha256 `ffbb9e03f7f6d0c4`, retrieved 2026-11-13, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/ldl1117s30r-datasheet.pdf)
docs/hero.png
⋯ 1 unchanged line ⋯
ldl1117s30r-hero.glbadded
⋯ 1 unchanged line ⋯
ldl1117s30r-hero.overlay.jsonadded+168
@@ -0,0 +1,168 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LDL1117S30R",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 4,+   "span_mm": 8.4,+   "dash_mm": 0.21,+   "gap_mm": 0.126,+   "pad_stroke_mm": 0.0504+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": false,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.664,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.5,+   3.5,+   -2.684,+   2.684+  ],+  "pads_bbox_mm": [+   -4.15,+   4.15,+   -3.05,+   3.05+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "ldl1117s30r-etched.glb",+  "glb_sha256": "25b8e0a79245dc3f0f7e61e5f74125a283f1732efe8477b49f329eb6745c74e4",+  "footprint": "ldl1117s30r.kicad_mod",+  "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+  "pins": "page.json component.pins",+  "pins_sha256": "951a0e3b0eb4b77681f5f7dae1b10fb15806a7ca6d32f68c6f6c7b1b7cc258ba"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "GND",+   "x": -4.3,+   "y": -2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "VOUT",+   "x": -4.3,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "VIN",+   "x": -4.3,+   "y": 2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    -2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    3.8+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ldl1117s30r.kicad_mod+37−71
@@ -1,4 +1,4 @@-(footprint "SOT-223"+(footprint "SOT-223-3_TabPin2" 	(version 20260206) 	(generator "pcbnew") 	(generator_version "10.0")@@ -8,7 +8,7 @@ 	(property "Reference" "REF**" 		(at 0 -4.5 0) 		(layer "F.SilkS")-		(uuid "4497a1e1-94b1-4cba-abfc-02d82a04371f")+		(uuid "095b50a5-76ce-476b-aa10-37a37fa441f1") 		(effects 			(font 				(size 1 1)@@ -16,10 +16,10 @@ 			) 		) 	)-	(property "Value" "SOT-223"+	(property "Value" "SOT-223-3_TabPin2" 		(at 0 4.5 0) 		(layer "F.Fab")-		(uuid "222a057b-4f1f-481e-81c0-82276f6e2fbf")+		(uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449") 		(effects 			(font 				(size 1 1)@@ -32,7 +32,7 @@ 		(unlocked yes) 		(layer "F.Fab") 		(hide yes)-		(uuid "cf35375b-a35a-4ccf-b401-52356d4eb3ab")+		(uuid "0fecb949-4744-4c65-8091-70f595847ba4") 		(effects 			(font 				(size 1.27 1.27)@@ -45,7 +45,7 @@ 		(unlocked yes) 		(layer "F.Fab") 		(hide yes)-		(uuid "e0b857b7-85f4-442e-9375-43b7f0b65024")+		(uuid "7dd6192e-e612-428f-816e-6f28697542d5") 		(effects 			(font 				(size 1.27 1.27)@@ -63,7 +63,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "10341b74-de1d-44f8-b919-9dc7b01c77a6")+		(uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d") 	) 	(fp_line 		(start -1.85 3.41)@@ -73,7 +73,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "9eaaee9c-d787-4c4e-9409-486f5d803253")+		(uuid "6e43f798-7915-403c-b947-4851bde35045") 	) 	(fp_line 		(start 1.91 -3.41)@@ -83,7 +83,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "668bbda1-c7e1-4e23-9d62-dd4d052018b0")+		(uuid "ddfc40c4-e33c-493e-b735-24282440d539") 	) 	(fp_line 		(start 1.91 3.41)@@ -93,7 +93,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "7b7161b8-bc72-4822-9d67-8c4bc120433f")+		(uuid "79366377-6a9f-460a-b0d1-788467590954") 	) 	(fp_poly 		(pts@@ -105,67 +105,27 @@ 		) 		(fill yes) 		(layer "F.SilkS")-		(uuid "818bd365-7a79-40a2-b037-dacc75b8af05")+		(uuid "27420593-f422-495a-9e17-88a99bcd8a3d") 	) 	(fp_line-		(start -4.4 -3.6)-		(end -4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "1e6e1c3c-cf2e-4570-9270-1e4425f802c5")-	)-	(fp_line-		(start -4.4 3.6)-		(end 4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "fe006c7f-e9e9-42b8-94e6-7fab62e45a96")-	)-	(fp_line-		(start 4.4 -3.6)-		(end -4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "18a70f3a-ba6f-445d-a1d1-b2229acce0b4")-	)-	(fp_line-		(start 4.4 3.6)-		(end 4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "1cb64177-a033-440a-bc55-482358e05d6e")-	)-	(fp_line-		(start -1.85 -2.3)+		(start -1.85 -2.35) 		(end -1.85 3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "2a9ca989-6b38-468d-a714-75a033988b2c")+		(uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc") 	) 	(fp_line-		(start -1.85 -2.3)-		(end -0.8 -3.35)+		(start -1.85 -2.35)+		(end -0.85 -3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "bcb7341f-c5b7-4cf0-ac84-66c574c5e61c")+		(uuid "f393364a-2641-4746-ba4c-6509ea1de503") 	) 	(fp_line 		(start -1.85 3.35)@@ -175,17 +135,17 @@ 			(type solid) 		) 		(layer "F.Fab")-		(uuid "c011dc66-40ad-4f1e-a34f-e251dae0cd31")+		(uuid "27db54e0-f4a8-4972-bcbc-256787416dcd") 	) 	(fp_line-		(start -0.8 -3.35)+		(start -0.85 -3.35) 		(end 1.85 -3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "80711826-0dce-449b-af78-388864936159")+		(uuid "be579ebe-38db-4860-98f0-9f530f704760") 	) 	(fp_line 		(start 1.85 -3.35)@@ -195,12 +155,12 @@ 			(type solid) 		) 		(layer "F.Fab")-		(uuid "a66ee799-671f-4902-ac92-f94d39f82acf")+		(uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca") 	) 	(fp_text user "${REFERENCE}" 		(at 0 0 90) 		(layer "F.Fab")-		(uuid "184c46b5-a004-48e0-8f63-d7d63dc324be")+		(uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b") 		(effects 			(font 				(size 0.8 0.8)@@ -213,28 +173,28 @@ 		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "ea891fee-0855-44cc-8da9-0c7b9e3b1505")+		(uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448") 	) 	(pad "2" smd roundrect 		(at -3.15 0) 		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "2adbaf0f-7617-4618-9438-78a8bd4ec4b2")+		(uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8") 	)-	(pad "3" smd roundrect-		(at -3.15 2.3)-		(size 2 1.5)+	(pad "2" smd roundrect+		(at 3.15 0)+		(size 2 3.8) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "1b42a1a5-e735-42f2-b87a-1df5a461081d")+		(uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e") 	)-	(pad "4" smd roundrect-		(at 3.15 0)-		(size 2 3.8)+	(pad "3" smd roundrect+		(at -3.15 2.3)+		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "023f2cc5-97fb-4421-8e37-e8aa385789b4")+		(uuid "5046df04-2b74-45a5-867e-e33a5e51e59c") 	) 	(embedded_fonts no) 	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"@@ -248,4 +208,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -4.40 -3.30) (xy -2.10 -3.30) (xy -2.10 -3.60) (xy 2.10 -3.60) (xy 2.10 -2.15) (xy 4.40 -2.15) (xy 4.40 2.15) (xy 2.10 2.15) (xy 2.10 3.60) (xy -2.10 3.60) (xy -2.10 3.30) (xy -4.40 3.30))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
ldl1117s30r.kicad_sym+1−5
@@ -16,11 +16,7 @@       (name "VOUT" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at 17.78 0.00 180) (length 5.08)-      (name "TAB" (effects (font (size 1.27 1.27))))-      (number "4" (effects (font (size 1.27 1.27))))-    )-    (pin power_in line (at 17.78 -2.54 180) (length 5.08)+    (pin power_in line (at 17.78 0.00 180) (length 5.08)       (name "VIN" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )
ldl1117s30r.lbr+20−13
@@ -50,14 +50,14 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4</description> <packages>-<package name="SOT-223">+<package name="SOT-223-3_TabPin2">   <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description>   <smd name="1" x="-3.1500" y="2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>   <smd name="2" x="-3.1500" y="-0.0000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="2@2" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/>   <smd name="3" x="-3.1500" y="-2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>-  <smd name="4" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/>   <polygon width="0.1200" layer="21">     <vertex x="-3.1300" y="3.3100"/>     <vertex x="-3.3700" y="3.6400"/>@@ -68,10 +68,10 @@   <wire x1="-1.8500" y1="-3.4100" x2="1.9100" y2="-3.4100" width="0.1200" layer="21"/>   <wire x1="1.9100" y1="3.4100" x2="1.9100" y2="2.1500" width="0.1200" layer="21"/>   <wire x1="1.9100" y1="-3.4100" x2="1.9100" y2="-2.1500" width="0.1200" layer="21"/>-  <wire x1="-1.8500" y1="2.3000" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>-  <wire x1="-1.8500" y1="2.3000" x2="-0.8000" y2="3.3500" width="0.1000" layer="51"/>+  <wire x1="-1.8500" y1="2.3500" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>+  <wire x1="-1.8500" y1="2.3500" x2="-0.8500" y2="3.3500" width="0.1000" layer="51"/>   <wire x1="-1.8500" y1="-3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/>-  <wire x1="-0.8000" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/>+  <wire x1="-0.8500" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/>   <wire x1="1.8500" y1="3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/>   <text x="0" y="4.010" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-4.010" size="1.27" layer="27" align="top-center">&gt;VALUE</text>@@ -79,6 +79,7 @@ </packages> <symbols> <symbol name="LDL1117S30R">+  <description>STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4</description>   <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>   <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -87,25 +88,31 @@   <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>   <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>   <pin name="VOUT" x="-17.78" y="-2.54" length="middle" direction="out"/>-  <pin name="TAB" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>-  <pin name="VIN" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="VIN" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="LDL1117S30R" prefix="U">-  <description></description>+  <description>STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4</description>   <gates>     <gate name="G$1" symbol="LDL1117S30R" x="0" y="0"/>   </gates>   <devices>-    <device name="" package="SOT-223">+    <device name="" package="SOT-223-3_TabPin2">       <connects>         <connect gate="G$1" pin="GND" pad="1"/>-        <connect gate="G$1" pin="VOUT" pad="2"/>-        <connect gate="G$1" pin="TAB" pad="4"/>+        <connect gate="G$1" pin="VOUT" pad="2 2@2"/>         <connect gate="G$1" pin="VIN" pad="3"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="LDL1117S30R" constant="no"/>+          <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943098260951040" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ldl1117s30r" constant="no"/>+          <attribute name="LCSC_PN" value="C2798214" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+80−34
@@ -1,8 +1,8 @@ {   "slug": "ldl1117s30r",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "power management (pmic)",@@ -26,27 +26,46 @@     "docs/hero.png",     "docs/ldl1117s30r-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "ldl1117s30r-hero.glb",+    "ldl1117s30r-hero.overlay.json"   ],   "component": {     "mpn": "LDL1117S30R",+    "land_source": "kicad",+    "land_note": "KiCad SOT-223-3_TabPin2: the tab is pad 2, the maker ties it to pin 2's signal; SOT-223 rule (b), part-reviewer / task master 2026-11-13: the maker prints pins 1-3 and ties the tab to pin 2 ('Note:             The tab is connected to VOUT.')",     "manufacturer": "STMicroelectronics",     "package": "SOT-223-4",-    "pin_count": 4,+    "pin_count": 3,     "category": "Power Management (PMIC)",     "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",     "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943098260951040",     "parts": {       "symbol": "ldl1117s30r.kicad_sym",       "footprint": "ldl1117s30r.kicad_mod",-      "model_3d": "ldl1117s30r-etched.glb",+      "model_3d": "ldl1117s30r-hero.glb",       "model_3d_plain": "ldl1117s30r.glb",       "model_3d_step": "ldl1117s30r-etched.step",       "model_3d_step_plain": "ldl1117s30r.step",       "lbr": "ldl1117s30r.lbr"     },     "distributor_links": {-      "lcsc": "C2798214"+      "lcsc": "C2798214",+      "digikey": "497-17238-2-ND",+      "mouser": "511-LDL1117S30R"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T01:41:34Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-17238-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "511-LDL1117S30R",+        "status": "found"+      }     },     "pins": [       {@@ -66,31 +85,10 @@         "name": "VIN",         "type": "power_in",         "description": "Input voltage terminal, operating range 2.5 V to 18 V, absolute maximum -0.3 V to 20 V."-      },-      {-        "number": "4",-        "name": "TAB",-        "type": "passive",-        "description": "Thermal pad connected to output voltage (VOUT) for heat dissipation."       }     ],     "provenance": {-      "extractor": "extract_pins 0.2",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.2",-        "primary_model": "claude-haiku-4-5-20251001",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: Pin 4 (TAB) is inferred from the SOT-223-4 package variant specified in the part hint. The datasheet"-        ],-        "pages_sent": 23,-        "cost_usd": 0.1282,-        "at": "2026-09-23T18:21:27"-      },+      "extractor": "ds2sf",       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943098260951040",         "pages": 23,@@ -99,8 +97,8 @@       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 4,-        "described": 4,+        "total": 3,+        "described": 3,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -126,7 +124,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -144,10 +142,58 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "3204a10880363e6c0e57337b10bcca539258c9194878bfe87af272a790b393c5",-        "checked": "2026-10-16",+        "sha256": "133d38c58f62a1767319f6e0710cc6947ed98c38a87bf7cdb95a779264517931",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "SOT223",+      "source_page": 15,+      "D": {+        "nom_mm": 6.5,+        "range_mm": [+          6.3,+          6.7+        ]+      },+      "E1": {+        "nom_mm": 3.5,+        "range_mm": [+          3.3,+          3.7+        ]+      },+      "E": {+        "nom_mm": 7.0,+        "range_mm": [+          6.7,+          7.3+        ]+      },+      "e": {+        "nom_mm": 2.3,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.8,+        "range_mm": [+          null,+          1.8+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "ldl1117s30r.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   } }
page.json+90−44
@@ -4,7 +4,7 @@   "slug": "ldl1117s30r",   "title": "LDL1117S30R",   "brief": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -15,23 +15,40 @@   ],   "component": {     "mpn": "LDL1117S30R",+    "land_source": "kicad",+    "land_note": "KiCad SOT-223-3_TabPin2: the tab is pad 2, the maker ties it to pin 2's signal; SOT-223 rule (b), part-reviewer / task master 2026-11-13: the maker prints pins 1-3 and ties the tab to pin 2 ('Note:             The tab is connected to VOUT.')",     "manufacturer": "STMicroelectronics",     "package": "SOT-223-4",-    "pin_count": 4,+    "pin_count": 3,     "category": "Power Management (PMIC)",     "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",     "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943098260951040",     "parts": {       "symbol": "ldl1117s30r.kicad_sym",       "footprint": "ldl1117s30r.kicad_mod",-      "model_3d": "ldl1117s30r-etched.glb",+      "model_3d": "ldl1117s30r-hero.glb",       "model_3d_plain": "ldl1117s30r.glb",       "model_3d_step": "ldl1117s30r-etched.step",       "model_3d_step_plain": "ldl1117s30r.step",       "lbr": "ldl1117s30r.lbr"     },     "distributor_links": {-      "lcsc": "C2798214"+      "lcsc": "C2798214",+      "digikey": "497-17238-2-ND",+      "mouser": "511-LDL1117S30R"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T01:41:34Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-17238-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "511-LDL1117S30R",+        "status": "found"+      }     },     "pins": [       {@@ -51,31 +68,10 @@         "name": "VIN",         "type": "power_in",         "description": "Input voltage terminal, operating range 2.5 V to 18 V, absolute maximum -0.3 V to 20 V."-      },-      {-        "number": "4",-        "name": "TAB",-        "type": "passive",-        "description": "Thermal pad connected to output voltage (VOUT) for heat dissipation."       }     ],     "provenance": {-      "extractor": "extract_pins 0.2",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.2",-        "primary_model": "claude-haiku-4-5-20251001",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: Pin 4 (TAB) is inferred from the SOT-223-4 package variant specified in the part hint. The datasheet"-        ],-        "pages_sent": 23,-        "cost_usd": 0.1282,-        "at": "2026-09-23T18:21:27"-      },+      "extractor": "ds2sf",       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943098260951040",         "pages": 23,@@ -84,8 +80,8 @@       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 4,-        "described": 4,+        "total": 3,+        "described": 3,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -103,15 +99,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -122,18 +118,66 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "3204a10880363e6c0e57337b10bcca539258c9194878bfe87af272a790b393c5",-        "checked": "2026-10-16",+        "sha256": "133d38c58f62a1767319f6e0710cc6947ed98c38a87bf7cdb95a779264517931",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "SOT223",+      "source_page": 15,+      "D": {+        "nom_mm": 6.5,+        "range_mm": [+          6.3,+          6.7+        ]+      },+      "E1": {+        "nom_mm": 3.5,+        "range_mm": [+          3.3,+          3.7+        ]+      },+      "E": {+        "nom_mm": 7,+        "range_mm": [+          6.7,+          7.3+        ]+      },+      "e": {+        "nom_mm": 2.3,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.8,+        "range_mm": [+          null,+          1.8+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "ldl1117s30r.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   },   "metadata": {     "specs": {@@ -374,10 +418,12 @@     "docs/hero.png",     "docs/ldl1117s30r-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "ldl1117s30r-hero.glb",+    "ldl1117s30r-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-24T23:53:35.984Z"-}+  "visibility": "public",+  "updated_at": "2026-09-24T23:53:35.984Z",+  "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file