← Commit history
ld7838gr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+68−1
page.json+68−1@@ -33,5 +33,72 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LD7838GR",+ "manufacturer": "Leadtrend Tech",+ "package": "SOP-7",+ "pin_count": 7,+ "category": "LED Drivers",+ "parts": {+ "symbol": "ld7838gr.kicad_sym",+ "footprint": "ld7838gr.kicad_mod",+ "model_3d": "ld7838gr-etched.glb",+ "model_3d_plain": "ld7838gr.glb",+ "model_3d_step": "ld7838gr-etched.step",+ "model_3d_step_plain": "ld7838gr.step",+ "lbr": "ld7838gr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "ZCD",+ "type": "input",+ "description": "Quasi-resonance zero-current detector and programmable maximum ON-time input. Input threshold ~0.2V (with 0.1V hysteresis), clamped between ~-0.3V and ~4.7V. ZCD OVP trips at ~3.5V for output over-voltage protection."+ },+ {+ "number": "2",+ "name": "COMP",+ "type": "input",+ "description": "Feedback/compensation pin. Connect a photo-coupler to close the control loop for regulation. Open-loop voltage ~5.0-5.8V; OLP trip ~4.6V; zero-ON-time burst threshold ~0.5V. Requires a 0.22-4.7uF filter capacitor."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Current sense pin for the external MOSFET; pulse-by-pulse OCP threshold ~0.85V, secondary diode-short threshold ~1.2V. Includes ~425ns leading-edge blanking. Recommended R-C filter: 100-2k ohm and 100-680 pF."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference for all internal circuitry and the gate driver return."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "output",+ "description": "Gate drive output for the external power MOSFET. CMOS totem-pole with ~125mA source / -500mA sink capability, clamped at ~13V for gate protection. Absolute range -0.3V to VCC+0.3V."+ },+ {+ "number": "6",+ "name": "VCC",+ "type": "power_in",+ "description": "Controller supply pin. Operating range 9.5-27.5V; UVLO ON ~16V, UVLO OFF ~8V, VCC OVP ~28V, PDR ~7.5V, absolute max 30V. Requires 4.7-22uF bulk plus a 0.1-0.47uF SMD ceramic close to the pin."+ },+ {+ "number": "8",+ "name": "HV",+ "type": "power_in",+ "description": "High-voltage startup pin (700V rated). Connect to the positive terminal of the main bulk cap to source ~1.8mA startup current until VCC reaches UVLO(on); then the internal HV current source is disabled to minimize standby loss. Also senses Brown-in/Brown-out (~90V DC in / hysteresis ~10V)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}