← Commit history

Initial commit: component/ld7576gs

Ray ·d17d0f3d0b ·
2 files changed +96
README.mdadded+62
@@ -0,0 +1,62 @@+# LD7576GS++**Leadtrend Tech** · AC-DC Controllers and Regulators · SOP-8++LD7576GS from Leadtrend Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CT | input | Programs the low-frequency timer / OLP delay time via an external capacitor to GND (recommended 0.047 µF to 0.1 µF, X7R; ~45 mS delay at 0.047 µF, ~110 mS at 0.1 µF). Also serves as a latch-mode trigger: pulling this pin below 0.8 V latches the controller off until AC power is recycled. |+| 2 | COMP | input | Voltage feedback pin (analogous to UC384X COMP). Driven by an opto-coupler from the secondary-side TL431 to close the regulation loop. Requires ≥102 pF X7R ceramic cap; open-loop voltage ~5.6 V; green-mode threshold ~2.35 V; OLP trip level 5.0 V; pulling below 1.2 V disables the gate output. |+| 3 | CS | input | Current sense pin for the primary MOSFET current. Maximum input threshold 0.85 V (typ), 230 nS internal leading-edge blanking, ~1 MΩ input impedance, 100 nS delay to output. Absolute max -0.3 V to +7 V; an external R-C filter is recommended for high-power designs to suppress negative turn-on spikes. |+| 4 | GND | power_in | Device ground return for all internal circuitry and the gate driver. Should have a short, low-inductance layout back to the CT capacitor and CS sense resistor. |+| 5 | OUT | output | Gate drive output for the external power MOSFET. CMOS totem-pole buffer with typical 500 mA source/sink capability; typical rise/fall 50 nS / 30 nS into 1 nF; maximum duty-cycle 75%. Absolute max -0.3 V to Vcc+0.3 V; includes an internal anti-floating pull-low resistor. |+| 6 | VCC | power_in | Supply voltage for the controller. Recommended operating range 11 V to 25 V (absolute max 30 V); UVLO(on) 16 V typ, UVLO(off) 10 V typ; OVP trip 28 V typ. Bypass with 10 µF to 47 µF; startup current <100 µA while the HV pin charges this rail. |+| 7 | NC | unconnected | No-connect. Present on the SOP-8 / DIP-8 packages only (absent from the SOP-7 variant). Leave floating. |+| 8 | HV | input | High-voltage startup input; connect to the positive terminal of the bulk (rectified DC) capacitor through a recommended 40 kΩ current-limit resistor. Sources ~1 mA (typ) into Vcc during startup and shuts off once Vcc trips UVLO(on) to eliminate steady-state startup losses. Absolute max 600 V; off-state leakage <35 µA at 500 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Leadtrend Tech |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `LD7576GS`+- `LD7576GSJGS`+- `LD7576GSHGS`+- `LD7576GSKGS`+- `LD7576GSPS`+- `LD7576GSJPS`+- `LD7576GSHPS`+- `LD7576GSKPS`+- `LD7576GSPN`+- `LD7576GSJPN`+- `LD7576GSHPN`+- `LD7576GSKPN`+- `LD7576GSGR`+- `LD7576GSJGR`+- `LD7576GSHGR`+- `LD7576GSKGR`++## CAD (KiCad official)++- Symbol: `LD7576GS`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Leadtrend Tech datasheet](docs/ld7576gs-datasheet.pdf) (None pp, sha256 `2d9941417fcbc06b`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ld7576gs-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ld7576gs",+  "version": "0.1.0",+  "type": "component",+  "description": "Leadtrend Tech AC-DC Controllers and Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ld7576gs"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ld7576gs.kicad_sym",+    "ld7576gs.kicad_mod",+    "ld7576gs.glb",+    "ld7576gs.step",+    "ld7576gs.lbr",+    "docs/hero.png",+    "docs/ld7576gs-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file