component
LD1117DT50CTR
Public Made by Adomby adom
STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-2(DPAK). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json: fold the "TAB" entry into pin 2. On TO-252-2 the tab is not a separate pad - it is that lead - so nothing was ever unconnected, but the page listed it as its own pin and pads.json reported pin-not-in-symbol for a pin that cannot exist. Target chosen because net VOUT matches pin 2; the tab's description is merged into that pin rather than dropped.
2 files changed
+4−17
pads.json+2−9@@ -24,14 +24,7 @@ "3" ], "paste_apertures": 4,- "issues": [- {- "kind": "pin-not-in-symbol",- "pin": "TAB",- "name": "VOUT",- "detail": "page.json describes pin \"TAB\" (VOUT) from the datasheet, but the symbol has no such pin, so nothing can connect to it"- }- ],+ "issues": [], "pads": [ { "pad": "1",@@ -84,7 +77,7 @@ "pin": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated 5.0 V output, up to 800 mA. Requires a 10 µF minimum output capacitor for loop stability. Electrically common with the exposed TAB.",+ "description": "Regulated 5.0 V output, up to 800 mA. Requires a 10 µF minimum output capacitor for loop stability. Electrically common with the exposed TAB. Also the package tab: metal heat-sink tab, internally connected to VOUT. Used for thermal dissipation to the PCB copper pour; carries the regulated output potential and must not be tied to ground.", "is_pin1": false, "source": { "geometry": "TO-252-2.kicad_mod",
page.json+2−8@@ -15,7 +15,7 @@ "mpn": "LD1117DT50CTR", "manufacturer": "STMicroelectronics", "package": "TO-252-2(DPAK)",- "pin_count": 4,+ "pin_count": 3, "category": "PMIC", "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators", "datasheet": "https://www.st.com/resource/en/datasheet/ld1117dt50ctr.pdf",@@ -42,19 +42,13 @@ "number": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated 5.0 V output, up to 800 mA. Requires a 10 \u00b5F minimum output capacitor for loop stability. Electrically common with the exposed TAB."+ "description": "Regulated 5.0 V output, up to 800 mA. Requires a 10 \u00b5F minimum output capacitor for loop stability. Electrically common with the exposed TAB. Also the package tab: metal heat-sink tab, internally connected to VOUT. Used for thermal dissipation to the PCB copper pour; carries the regulated output potential and must not be tied to ground." }, { "number": "3", "name": "VIN", "type": "power_in", "description": "Unregulated DC input. Absolute maximum 15 V continuous (18 V when IOUT < 20 mA). Typical dropout 1 V at full load; a 100 nF input capacitor is recommended."- },- {- "number": "TAB",- "name": "VOUT",- "type": "power_out",- "description": "Metal heat-sink tab, internally connected to VOUT. Used for thermal dissipation to the PCB copper pour; carries the regulated output potential and must not be tied to ground." } ], "provenance": {