component
LD1117DT33CTR
Public Made by Adomby adom
STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DPAK. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json: fold the "TAB" entry into pin 2. On TO-252-2 the tab is not a separate pad - it is that lead - so nothing was ever unconnected, but the page listed it as its own pin and pads.json reported pin-not-in-symbol for a pin that cannot exist. Target chosen because net VOUT matches pin 2; the tab's description is merged into that pin rather than dropped.
2 files changed
+4−17
pads.json+2−9@@ -24,14 +24,7 @@ "3" ], "paste_apertures": 4,- "issues": [- {- "kind": "pin-not-in-symbol",- "pin": "TAB",- "name": "VOUT",- "detail": "page.json describes pin \"TAB\" (VOUT) from the datasheet, but the symbol has no such pin, so nothing can connect to it"- }- ],+ "issues": [], "pads": [ { "pad": "1",@@ -84,7 +77,7 @@ "pin": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated 3.3 V output. Supplies up to 800 mA (typ. 950 mA, max 1300 mA) at Vin − Vout = 5 V, TJ = 25 °C. A minimum 10 µF output capacitor is required for loop stability.",+ "description": "Regulated 3.3 V output. Supplies up to 800 mA (typ. 950 mA, max 1300 mA) at Vin − Vout = 5 V, TJ = 25 °C. A minimum 10 µF output capacitor is required for loop stability. Also the package tab: exposed metal tab used as the primary thermal path. Electrically connected to VOUT internally, so any heatsink/copper pour on the tab is at the regulated output potential (not ground).", "is_pin1": false, "source": { "geometry": "TO-252-2.kicad_mod",
page.json+2−8@@ -15,7 +15,7 @@ "mpn": "LD1117DT33CTR", "manufacturer": "STMicroelectronics", "package": "DPAK",- "pin_count": 4,+ "pin_count": 3, "category": "PMIC", "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators", "datasheet": "https://www.st.com/resource/en/datasheet/ld1117dt33ctr.pdf",@@ -42,19 +42,13 @@ "number": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated 3.3 V output. Supplies up to 800 mA (typ. 950 mA, max 1300 mA) at Vin \u2212 Vout = 5 V, TJ = 25 \u00b0C. A minimum 10 \u00b5F output capacitor is required for loop stability."+ "description": "Regulated 3.3 V output. Supplies up to 800 mA (typ. 950 mA, max 1300 mA) at Vin \u2212 Vout = 5 V, TJ = 25 \u00b0C. A minimum 10 \u00b5F output capacitor is required for loop stability. Also the package tab: exposed metal tab used as the primary thermal path. Electrically connected to VOUT internally, so any heatsink/copper pour on the tab is at the regulated output potential (not ground)." }, { "number": "3", "name": "VIN", "type": "power_in", "description": "Unregulated DC input supply. Operating input voltage up to 15 V; absolute maximum 15 V (18 V permitted only when IOUT < 20 mA). A 100 nF input decoupling capacitor is recommended."- },- {- "number": "TAB",- "name": "VOUT",- "type": "power_out",- "description": "Exposed metal tab used as the primary thermal path. Electrically connected to VOUT internally, so any heatsink/copper pour on the tab is at the regulated output potential (not ground)." } ], "provenance": {