← Commit history
README.md+36−32
@@ -2,16 +2,15 @@  **UTC Unisonic Tech** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223 -LD1117AG-50-AA3-D-R from UTC Unisonic Tech, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+LD1117AG-50-AA3-D-R from UTC Unisonic Tech, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIN | power_in | Unregulated positive input supply. Recommended operating range up to 15V (abs max 18V). For the 5.0V variant, VIN must be at least ~6.5V for full regulation (dropout ~1.2V at 1A). Bypass with a 10uF capacitor close to the pin. |-| 2 | GND | power_in | Device ground reference. On fixed-output versions this pin sets the 0V reference for the internal error amplifier. Should be tied to system ground with a low-impedance return path. |-| 3 | VOUT | power_out | Regulated 5.0V output (tolerance +/-2%, 4.900V min / 5.100V max). Supplies up to 1.0A on the 'A' variant. Requires a minimum 10uF output capacitor for stability; MLCC supported per the ESR SOA graph. |-| 4 | TAB | power_out | Large SOT-223 heat-slug tab, internally connected to VOUT. Solder to a copper pour tied to the VOUT net for thermal dissipation (theta_JA = 165 C/W for SOT-223). |+| 1 | VIN | power_in | VIN (pin code D, pin 1: I). |+| 2 | GND/ADJ | power_in | GND/ADJ (pin code D, pin 2: G). Ground for the fixed 5.0 V version. KiCad's SOT-223-3_TabPin2 joins the tab to this pad; the sheet does not name the tab's net, and on SOT-223 the tab is the centre lead's frame. |+| 3 | VOUT | power_out | VOUT (pin code D, pin 3: O). |  ## Key specifications @@ -19,32 +18,37 @@ LD1117AG-50-AA3-D-R from UTC Unisonic Tech, in a SOT-223. Pinout and pin descrip |---|---| | Manufacturer | UTC Unisonic Tech | | Package | SOT-223 |-| Category | PMIC |-| Pins | 4 |--## Ordering variants--- `LD1117AG-50-AA3-D-RAA3-A-R`-- `LD1117AG-50-AA3-D-RAA3-B-R`-- `LD1117AG-50-AA3-D-RAA3-C-R`-- `LD1117AG-50-AA3-D-R`-- `LD1117AG-50-AA3-D-RAA3-A-T`-- `LD1117AG-50-AA3-D-RAA3-B-T`-- `LD1117AG-50-AA3-D-RAA3-C-T`-- `LD1117AG-50-AA3-D-RAA3-D-T`-- `LD1117AG-50-AA3-D-RAB3`-- `LD1117AG-50-AA3-D-RTA3`-- `LD1117AG-50-AA3-D-RTF3`-- `LD1117AG-50-AA3-D-RTN3`-- `LD1117AG-50-AA3-D-RTND`-- `LD1117AG-50-AA3-D-RT2Q`-- `LD1117AG-50-AA3-D-RTQ2`-- `LD1117AG-50-AA3-D-RTQ3`-- `LD1117AG-50-AA3-D-RAE5-G`-- `LD1117AG-50-AA3-D-RAF5-G`-- `LD1117AG-50-AA3-D-RS08`-- `LD1117AG-50-AA3-D-RSH2`-- `LD1117AG-50-AA3-D-RP5060-R`+| Category | Voltage Regulators - Linear, Low Drop Out (LDO) Regulators |+| Pins | 3 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| DC Input Voltage | VIN |  |  | 18 | V |  | 4 |+| Junction Temperature | TJ |  |  | 150 | °C |  | 4 |+| Operating Temperature | TOPR | -20 |  | 125 | °C | Note 2 | 4 |+| Storage temperature | TSTG | -65 |  | 150 | °C |  | 4 |+| Input Voltage | VIN |  |  | 15 | V |  | 4 |+| Operating Junction Temperature | TJ | -20 |  | 125 | °C |  | 4 |+| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN=7V, IOUT=10mA, TJ=25°C | 9 |+| Line Regulation | VOUT |  | 1 | 10 | mV | VIN=6.5 to 15V, IOUT=0mA | 9 |+| Load Regulation | VOUT |  | 1 | 15 | mV | VIN=6.5V; LD1117A: IOUT=0~1000mA | 9 |+| Quiescent Current | IQ |  | 5 | 10 | mA | VIN15V | 9 |+| Supply Voltage Rejection | SVR | 60 | 75 |  | dB | IOUT=40mA, f=120Hz, TJ=25°C, VIN=8V, VRIPPLE=1VPP | 9 |+| Dropout Voltage | VD |  | 1 | 1.1 | V | IOUT=100mA | 9 |+| Dropout Voltage | VD |  | 1.15 | 1.25 | V | IOUT=500mA | 9 |+| Dropout Voltage | VD |  | 1.2 | 1.3 | V | IOUT=800mA | 9 |+| Thermal Regulation |  |  | 0.01 | 0.1 | %/W | TA=25°C, 30ms Pulse | 9 |+| Temperature stability | VOUT |  | 0.5 |  | % |  | 9 |+| Long Term Stability | VOUT |  | 0.3 |  | % | 1000 hrs, TJ=125°C | 9 |+| Operating Input Voltage | VIN |  | 15 |  | V | IOUT=100mA | 9 |+| Current Limit | ILIMIT |  | 1000 |  | mA | LD1117A: VIN=10V, TJ=25°C | 9 |+| Output Noise Voltage | eN |  | 100 |  | V | B=10Hz to 10KHz, TJ=25°C | 9 |+| Junction to ambient, SOT-223 | θJA |  | 165 |  | °C/W | SOT-223 | 4 |+| Junction to case, SOT-223 | θJC |  | 15 |  | C/W | SOT-223 | 4 |  ## CAD (KiCad official) @@ -57,7 +61,7 @@ LD1117AG-50-AA3-D-R from UTC Unisonic Tech, in a SOT-223. Pinout and pin descrip  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [UTC Unisonic Tech datasheet](docs/ld1117ag-50-aa3-d-r-datasheet.pdf) (None pp, sha256 `cc56230fa080b180`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [UTC Unisonic Tech datasheet](docs/ld1117ag-50-aa3-d-r-datasheet.pdf) (15 pp, sha256 `f7f26a117cb07dc2`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/ld1117ag-50-aa3-d-r-datasheet.pdf
⋯ 1 unchanged line ⋯
ld1117ag-50-aa3-d-r-hero.glbadded
⋯ 1 unchanged line ⋯
ld1117ag-50-aa3-d-r-hero.overlay.jsonadded+168
@@ -0,0 +1,168 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LD1117AG-50-AA3-D-R",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 4,+   "span_mm": 8.4,+   "dash_mm": 0.21,+   "gap_mm": 0.126,+   "pad_stroke_mm": 0.0504+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": false,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.664,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.5,+   3.5,+   -2.684,+   2.684+  ],+  "pads_bbox_mm": [+   -4.15,+   4.15,+   -3.05,+   3.05+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "ld1117ag-50-aa3-d-r-etched.glb",+  "glb_sha256": "cf64d5971c5bd65fb80e7dac8a868e82d81b52baae88a9186345a585e20526cd",+  "footprint": "ld1117ag-50-aa3-d-r.kicad_mod",+  "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+  "pins": "page.json component.pins",+  "pins_sha256": "308e049fff4793a9526bad8ec7f33fa8d1ed20e923180eb9ad5353cf56deea74"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "VIN",+   "x": -4.3,+   "y": -2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "GND/ADJ",+   "x": -4.3,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "VOUT",+   "x": -4.3,+   "y": 2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    -2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    3.8+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ld1117ag-50-aa3-d-r.kicad_mod+6−40
@@ -107,46 +107,6 @@ 		(layer "F.SilkS") 		(uuid "27420593-f422-495a-9e17-88a99bcd8a3d") 	)-	(fp_line-		(start -4.4 -3.6)-		(end -4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")-	)-	(fp_line-		(start -4.4 3.6)-		(end 4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")-	)-	(fp_line-		(start 4.4 -3.6)-		(end -4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "d963e7fb-b321-4298-bcd6-9650f5938938")-	)-	(fp_line-		(start 4.4 3.6)-		(end 4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "18839f08-10e9-4a73-9312-8be172f09091")-	) 	(fp_line 		(start -1.85 -2.35) 		(end -1.85 3.35)@@ -248,4 +208,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -4.40 -3.30) (xy -2.10 -3.30) (xy -2.10 -3.60) (xy 2.10 -3.60) (xy 2.10 -2.15) (xy 4.40 -2.15) (xy 4.40 2.15) (xy 2.10 2.15) (xy 2.10 3.60) (xy -2.10 3.60) (xy -2.10 3.30) (xy -4.40 3.30))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
ld1117ag-50-aa3-d-r.kicad_sym+1−5
@@ -13,14 +13,10 @@       (number "1" (effects (font (size 1.27 1.27))))     )     (pin power_in line (at -17.78 -2.54 0) (length 5.08)-      (name "GND" (effects (font (size 1.27 1.27))))+      (name "GND/ADJ" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )     (pin power_out line (at 17.78 0.00 180) (length 5.08)-      (name "TAB" (effects (font (size 1.27 1.27))))-      (number "4" (effects (font (size 1.27 1.27))))-    )-    (pin power_out line (at 17.78 -2.54 180) (length 5.08)       (name "VOUT" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )
ld1117ag-50-aa3-d-r.lbr+17−18
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>+<description></description> <packages> <package name="SOT-223-3_TabPin2">   <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description>@@ -78,31 +78,30 @@ </package> </packages> <symbols>-<symbol name="SOT-223-3_TabPin2">-  <description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>-  <wire x1="-7.62" y1="3.81" x2="7.62" y2="3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="3.81" x2="7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="-3.81" x2="-7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="-7.62" y1="-3.81" x2="-7.62" y2="3.81" width="0.254" layer="94"/>-  <text x="0" y="6.35" size="1.27" layer="95" align="bottom-center">&gt;NAME</text>-  <text x="0" y="-6.35" size="1.27" layer="96" align="top-center">&gt;VALUE</text>-  <pin name="1" x="-12.7" y="2.54" length="short" direction="pas"/>-  <pin name="2" x="-12.7" y="0" length="short" direction="pas"/>-  <pin name="3" x="12.7" y="2.54" length="short" direction="pas" rot="R180"/>+<symbol name="LD1117AG-50-AA3-D-R">+  <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+  <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="VIN" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="GND/ADJ" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="VOUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets>-<deviceset name="SOT-223-3_TabPin2" prefix="U">-  <description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>+<deviceset name="LD1117AG-50-AA3-D-R" prefix="U">+  <description></description>   <gates>-    <gate name="G$1" symbol="SOT-223-3_TabPin2" x="0" y="0"/>+    <gate name="G$1" symbol="LD1117AG-50-AA3-D-R" x="0" y="0"/>   </gates>   <devices>     <device name="" package="SOT-223-3_TabPin2">       <connects>-        <connect gate="G$1" pin="1" pad="1"/>-        <connect gate="G$1" pin="2" pad="2 2@2"/>-        <connect gate="G$1" pin="3" pad="3"/>+        <connect gate="G$1" pin="VIN" pad="1"/>+        <connect gate="G$1" pin="GND/ADJ" pad="2 2@2"/>+        <connect gate="G$1" pin="VOUT" pad="3"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
package.json+124−7
@@ -1,12 +1,14 @@ {   "slug": "ld1117ag-50-aa3-d-r",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",-    "pmic",-    "ld1117ag-50-aa3-d-r"+    "voltage regulators - linear, low drop out (ldo) regulators",+    "ld1117ag-50-aa3-d-r",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,121 @@     "docs/hero.png",     "docs/ld1117ag-50-aa3-d-r-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "ld1117ag-50-aa3-d-r-hero.glb",+    "ld1117ag-50-aa3-d-r-hero.overlay.json"+  ],+  "component": {+    "mpn": "LD1117AG-50-AA3-D-R",+    "manufacturer": "UTC Unisonic Tech",+    "package": "SOT-223",+    "pin_count": 3,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8df78a8eb2f8d095670f5827599b77fe.pdf",+    "parts": {+      "symbol": "ld1117ag-50-aa3-d-r.kicad_sym",+      "footprint": "ld1117ag-50-aa3-d-r.kicad_mod",+      "model_3d": "ld1117ag-50-aa3-d-r-hero.glb",+      "model_3d_plain": "ld1117ag-50-aa3-d-r.glb",+      "model_3d_step": "ld1117ag-50-aa3-d-r-etched.step",+      "model_3d_step_plain": "ld1117ag-50-aa3-d-r.step",+      "lbr": "ld1117ag-50-aa3-d-r.lbr"+    },+    "distributor_links": {+      "lcsc": "C5160420"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T10:51:30Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "quota"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "VIN (pin code D, pin 1: I)."+      },+      {+        "number": "2",+        "name": "GND/ADJ",+        "type": "power_in",+        "description": "GND/ADJ (pin code D, pin 2: G). Ground for the fixed 5.0 V version. KiCad's SOT-223-3_TabPin2 joins the tab to this pad; the sheet does not name the tab's net, and on SOT-223 the tab is the centre lead's frame."+      },+      {+        "number": "3",+        "name": "VOUT",+        "type": "power_out",+        "description": "VOUT (pin code D, pin 3: O)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/8df78a8eb2f8d095670f5827599b77fe.pdf",+        "pages": 15,+        "sha256": "f7f26a117cb07dc2",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 3,+        "described": 3,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "ld1117ag-50-aa3-d-r.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.0,+          6.5,+          1.7+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ld1117ag-50-aa3-d-r-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.0,+          6.5,+          1.7+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "29882c84c5cae6e914952ac94b58790ea4998efae8257f214f3426b17c2d468b",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+58−49
@@ -1,12 +1,14 @@ {   "slug": "ld1117ag-50-aa3-d-r",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",-    "pmic",-    "ld1117ag-50-aa3-d-r"+    "voltage regulators - linear, low drop out (ldo) regulators",+    "ld1117ag-50-aa3-d-r",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -25,11 +27,10 @@     "docs/ld1117ag-50-aa3-d-r-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "ld1117ag-50-aa3-d-r-etched.step"+    "ld1117ag-50-aa3-d-r-hero.glb",+    "ld1117ag-50-aa3-d-r-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "author": {     "name": "Ray",     "email": "[email protected]"@@ -38,67 +39,74 @@     "mpn": "LD1117AG-50-AA3-D-R",     "manufacturer": "UTC Unisonic Tech",     "package": "SOT-223",-    "pin_count": 4,+    "pin_count": 3,     "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8df78a8eb2f8d095670f5827599b77fe.pdf",     "parts": {       "symbol": "ld1117ag-50-aa3-d-r.kicad_sym",       "footprint": "ld1117ag-50-aa3-d-r.kicad_mod",-      "model_3d": "ld1117ag-50-aa3-d-r-etched.glb",+      "model_3d": "ld1117ag-50-aa3-d-r-hero.glb",       "model_3d_plain": "ld1117ag-50-aa3-d-r.glb",       "model_3d_step": "ld1117ag-50-aa3-d-r-etched.step",       "model_3d_step_plain": "ld1117ag-50-aa3-d-r.step",       "lbr": "ld1117ag-50-aa3-d-r.lbr"     },+    "distributor_links": {+      "lcsc": "C5160420"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T10:51:30Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "quota"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },     "pins": [       {         "number": "1",         "name": "VIN",         "type": "power_in",-        "description": "Unregulated positive input supply. Recommended operating range up to 15V (abs max 18V). For the 5.0V variant, VIN must be at least ~6.5V for full regulation (dropout ~1.2V at 1A). Bypass with a 10uF capacitor close to the pin."+        "description": "VIN (pin code D, pin 1: I)."       },       {         "number": "2",-        "name": "GND",+        "name": "GND/ADJ",         "type": "power_in",-        "description": "Device ground reference. On fixed-output versions this pin sets the 0V reference for the internal error amplifier. Should be tied to system ground with a low-impedance return path."+        "description": "GND/ADJ (pin code D, pin 2: G). Ground for the fixed 5.0 V version. KiCad's SOT-223-3_TabPin2 joins the tab to this pad; the sheet does not name the tab's net, and on SOT-223 the tab is the centre lead's frame."       },       {         "number": "3",         "name": "VOUT",         "type": "power_out",-        "description": "Regulated 5.0V output (tolerance +/-2%, 4.900V min / 5.100V max). Supplies up to 1.0A on the 'A' variant. Requires a minimum 10uF output capacitor for stability; MLCC supported per the ESR SOA graph."-      },-      {-        "number": "4",-        "name": "TAB",-        "type": "power_out",-        "description": "Large SOT-223 heat-slug tab, internally connected to VOUT. Solder to a copper pour tied to the VOUT net for thermal dissipation (theta_JA = 165 C/W for SOT-223)."+        "description": "VOUT (pin code D, pin 3: O)."       }     ],     "provenance": {-      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/8df78a8eb2f8d095670f5827599b77fe.pdf",+        "pages": 15,+        "sha256": "f7f26a117cb07dc2",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 3,+        "described": 3,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }     },     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"     },-    "distributor_links": {-      "lcsc": "C5160420",-      "digikey": false,-      "mouser": false-    },-    "distributor_check": {-      "checked_at": "2026-10-05T19:03:02Z",-      "source": "Component Ocean /api/assign-pns + lcsc_map",-      "digikey": {-        "pn": null,-        "status": "no match"-      },-      "mouser": {-        "pn": null,-        "status": "no match"-      }-    },     "models_3d": [       {         "file": "ld1117ag-50-aa3-d-r.step",@@ -108,15 +116,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",-        "checked": "2026-10-07",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -127,17 +135,18 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "7f20d061bbd1b24a01ecf1f964c73349e6146087677272d712f394271877e711",-        "checked": "2026-10-16",+        "sha256": "29882c84c5cae6e914952ac94b58790ea4998efae8257f214f3426b17c2d468b",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]-  }-}+  },+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LD1117AG-50-AA3-D-R footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-4.800 -4.000 9.600 8.000' style='width:100%;height:100%'><line class='ly-silk' x1='-1.850' y1='-3.410' x2='1.910' y2='-3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-1.850' y1='3.410' x2='1.910' y2='3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='-3.410' x2='1.910' y2='-2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='3.410' x2='1.910' y2='2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-4.400' y1='-3.600' x2='-4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.400' y1='3.600' x2='4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='-3.600' x2='-4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='3.600' x2='4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-0.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.850' y1='-3.350' x2='1.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='1.850' y1='-3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='VIN' x='-4.150' y='-3.050' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='-2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='-4.150' y='-0.750' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='0.000' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='2.150' y='-1.900' width='2.000' height='3.800' rx='0.500' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.150' y='0.000' font-size='1.100' transform='rotate(-90 3.150 0.000)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='VOUT' x='-4.150' y='1.550' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/LD1117AG-50-AA3-D-R", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"TAB","number":"4","type":""},{"desc":"","name":"VOUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ld1117ag-50-aa3-d-r</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LD1117AG-50-AA3-D-R symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -200 1500 400' style='width:100%;height:100%'><rect x='-500.0' y='-150.0' width='1000.0' height='300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VIN'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VIN</text><g class='pingroup' data-num='2' data-name='GND'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='4' data-name='TAB'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>TAB</text><g class='pingroup' data-num='3' data-name='VOUT'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VOUT</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/LD1117AG-50-AA3-D-R", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"TAB","number":"4","type":""},{"desc":"","name":"VOUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ld1117ag-50-aa3-d-r</title>\ No newline at end of file