ld1117ag-50-aa3-d-r

@@ -33,5 +33,54 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LD1117AG-50-AA3-D-R",+    "manufacturer": "UTC Unisonic Tech",+    "package": "SOT-223",+    "pin_count": 4,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "ld1117ag-50-aa3-d-r.kicad_sym",+      "footprint": "ld1117ag-50-aa3-d-r.kicad_mod",+      "model_3d": "ld1117ag-50-aa3-d-r-etched.glb",+      "model_3d_plain": "ld1117ag-50-aa3-d-r.glb",+      "model_3d_step": "ld1117ag-50-aa3-d-r-etched.step",+      "model_3d_step_plain": "ld1117ag-50-aa3-d-r.step",+      "lbr": "ld1117ag-50-aa3-d-r.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Unregulated positive input supply. Recommended operating range up to 15V (abs max 18V). For the 5.0V variant, VIN must be at least ~6.5V for full regulation (dropout ~1.2V at 1A). Bypass with a 10uF capacitor close to the pin."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. On fixed-output versions this pin sets the 0V reference for the internal error amplifier. Should be tied to system ground with a low-impedance return path."+      },+      {+        "number": "3",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 5.0V output (tolerance +/-2%, 4.900V min / 5.100V max). Supplies up to 1.0A on the 'A' variant. Requires a minimum 10uF output capacitor for stability; MLCC supported per the ESR SOA graph."+      },+      {+        "number": "4",+        "name": "TAB",+        "type": "power_out",+        "description": "Large SOT-223 heat-slug tab, internally connected to VOUT. Solder to a copper pour tied to the VOUT net for thermal dissipation (theta_JA = 165 C/W for SOT-223)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}