← Commit history

Initial commit: component/lan9730i-abzj

Ray ·020dfb9d54 ·
2 files changed +533
README.mdadded+93
@@ -0,0 +1,93 @@+# LAN9730I-ABZJ++**Microchip Tech** · USB Converters · QFN-56-EP(8x8)++LAN9730I-ABZJ from Microchip Tech, in a QFN-56-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | nPHY_INT | output | PHY interrupt output (active-high in Internal PHY Mode, active-low input in External PHY Mode). |+| 2 | TXN | bidirectional | Ethernet transmit data negative (100Ω differential pair with TXP for 100BASE-TX transmission). |+| 3 | TXP | bidirectional | Ethernet transmit data positive (100Ω differential pair with TXN for 100BASE-TX transmission). |+| 4 | VDD33A | power_in | +3.3V analog power supply for Ethernet and USB circuits. |+| 5 | RXN | bidirectional | Ethernet receive data negative (100Ω differential pair with RXP for receiving Ethernet signals). |+| 6 | RXP | bidirectional | Ethernet receive data positive (100Ω differential pair with RXN for receiving Ethernet signals). |+| 7 | EXRES | input | External Ethernet PHY bias resistor connection point; connect 12.0 kΩ ±1.0% resistor to ground. |+| 8 | VDD33A | power_in | +3.3V analog power supply for Ethernet and USB circuits. |+| 9 | VDD12PLL | power_in | +1.2V power supply for Ethernet PLL circuits. |+| 10 | HSIC_DATA | bidirectional | HSIC bidirectional double-data-rate (DDR) data signal synchronized to HSIC_STROBE per HSIC 1.0 specification. |+| 11 | HSIC_STROBE | bidirectional | HSIC bidirectional strobe signal synchronized with HSIC_DATA per High-Speed Inter-Chip specification version 1.0. |+| 12 | VDD12A | power_in | +1.2V power supply for HSIC interface and analog circuits; must be connected to VDD12CORE. |+| 13 | TEST2 | input | Test pin; must be connected to +3.3V for proper operation. |+| 14 | TXER | output | Transmit error output; shows internal MII signal in Internal PHY Mode or external PHY error in External PHY Mode. |+| 15 | VDD33A | power_in | +3.3V analog power supply for Ethernet and USB circuits. |+| 16 | USBRBIAS | input | USB bias resistor connection point for HS transmit current and termination impedance; connect 12.0 kΩ ±1.0% to ground. |+| 17 | VDD12USBPLL | power_in | +1.2V power supply for USB PLL; must be connected to VDD12CORE. |+| 18 | XI | input | External 25 MHz crystal input; can alternatively be driven by single-ended 25 MHz clock oscillator (±50ppm). |+| 19 | XO | output | External 25 MHz crystal output; leave unconnected if using single-ended clock oscillator input on XI. |+| 20 | SLEW_TUNE | input | HSIC slew rate boost configuration strap; low selects 40Ω driver impedance, high selects 50Ω (sampled at power-on). |+| 21 | VDD12CORE | power_in | +1.2V power supply for digital core logic; must be connected to VDD12USBPLL, VDD12PLL, and VDD12A. |+| 22 | MDC/GPIO2 | output | Management Data Clock output for MDIO interface or GPIO2 when programmed as general purpose I/O. |+| 23 | MDIO/GPIO1 | bidirectional | Management Data bidirectional signal for PHY management or GPIO1 programmable I/O; serves as PME_MODE_SEL in PME mode. |+| 24 | nRESET | input | Active-low system reset input; allows external hardware to reset device and signals PME_CLEAR in PME mode. |+| 25 | VDD33IO | power_in | +3.3V I/O power supply for I/O buffer circuits. |+| 26 | nFDX_LED/GPIO8 | output | Full-Duplex indicator LED output (active-low, open-drain) or GPIO8 programmable I/O; may signal PME in External PHY+PME mode. |+| 27 | nLNKA_LED/GPIO9 | output | Link Activity indicator LED output (active-low, open-drain, pulsed for activity) or GPIO9; PME_MODE_SEL in External PHY+PME mode. |+| 28 | nSPD_LED/GPIO10 | output | Speed indicator LED output (active-low for 100Mbps, open-drain) or GPIO10; wakeup pin in PME mode. |+| 29 | EECLK | output | EEPROM serial clock output; must be pulled up externally for proper operation with external EEPROM. |+| 30 | EECS | output | EEPROM chip select output; external pull-down resistor recommended to prevent false selection during power-up. |+| 31 | EEDO/AUTOMDIX_EN | output | EEPROM data output (drives EEDI of external EEPROM) or Auto-MDIX enable configuration strap (latched at power-on). |+| 32 | EEDI | input | EEPROM data input from external serial EEPROM (driven by EEDO output of EEPROM). |+| 33 | TEST1 | input | Test pin; must be connected to VSS (ground) for proper operation. |+| 34 | PHY_SEL | input | PHY mode selection configuration strap (latched at power-on); 0=Internal PHY (default), 1=External PHY mode. |+| 35 | VDD33IO | power_in | +3.3V I/O power supply for I/O buffer circuits. |+| 36 | nTRST/RXD0 | input | JTAG test port reset (active-low) in Internal PHY Mode or receive data 0 input from external PHY in External PHY Mode. |+| 37 | TDO/nPHY_RST | output | JTAG test data output in Internal PHY Mode or PHY reset (active-low) output in External PHY Mode. |+| 38 | TCK/RXD1 | input | JTAG test clock input (max 25MHz) in Internal PHY Mode or receive data 1 input from external PHY in External PHY Mode. |+| 39 | TMS/RXD2 | input | JTAG test mode select in Internal PHY Mode or receive data 2 input from external PHY in External PHY Mode. |+| 40 | TDI/RXD3 | input | JTAG test data input in Internal PHY Mode or receive data 3 input from external PHY in External PHY Mode. |+| 41 | RXCLK | input | Receive clock input from external PHY; can be programmed to display internal MII signal in Internal PHY Mode. |+| 42 | RXDV | input | Receive data valid input from external PHY; can be programmed to display internal MII signal in Internal PHY Mode. |+| 43 | TXEN | output | Transmit enable output to external PHY indicating valid transmit data; shows internal signal in Internal PHY Mode. |+| 44 | RXER | input | Receive error input from external PHY; can be programmed to display internal MII signal in Internal PHY Mode. |+| 45 | CRS/GPIO3 | input | Carrier sense input from external PHY; can show internal MII signal in Internal PHY Mode or serve as GPIO3. |+| 46 | COL/GPIO0 | input | Collision detect input from external PHY; can show internal MII signal in Internal PHY Mode or serve as GPIO0 with PME capability. |+| 47 | TXCLK | input | Transmit clock input (typically from external PHY or system oscillator) that clocks out TXD signals. |+| 48 | VDD33IO | power_in | +3.3V I/O power supply for I/O buffer circuits. |+| 49 | CORE_REG_EN | input | Internal core regulator enable; tie low to disable internal regulator (external +1.2V supply required), high to enable. |+| 50 | VDD12CORE | power_in | +1.2V power supply for digital core logic; must be connected to VDD12USBPLL, VDD12PLL, and VDD12A. |+| 51 | VDD33IO | power_in | +3.3V I/O power supply for I/O buffer circuits. |+| 52 | VDD33IO | power_in | +3.3V I/O power supply for I/O buffer circuits. |+| 53 | TXD3/GPIO7/50DRIVER_EN | output | Transmit data 3 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO7 alternative; 50DRIVER_EN HSIC impedance strap. |+| 54 | TXD2/GPIO6/PORT_SWAP | output | Transmit data 2 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO6 alternative; PORT_SWAP HSIC strap. |+| 55 | TXD1/GPIO5/RMT_WKP | output | Transmit data 1 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO5 alternative; RMT_WKP remote wakeup strap. |+| 56 | TXD0/GPIO4/EEP_DISABLE | output | Transmit data 0 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO4 alternative; EEP_DISABLE EEPROM strap. |+| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | QFN-56-EP(8x8) |+| Category | Interface |+| Pins | 57 |++## CAD (KiCad official)++- Symbol: `LAN9730I-ABZJ`+- Footprint: `Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm`+- 3D model: QFN-56-EP(8x8) (KiCad packages3D, STEP)+- 3D model files: `lan9730i-abzj-etched.step` / `lan9730i-abzj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lan9730i-abzj.step` / `lan9730i-abzj.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883932742103040) (61 pp, sha256 `cf250745188f25f0`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lan9730i-abzj-datasheet.pdf)
page.jsonadded+440
@@ -0,0 +1,440 @@+{+  "slug": "lan9730i-abzj",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech USB Converters, QFN-56-EP(8x8). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "lan9730i-abzj",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lan9730i-abzj.kicad_sym",+    "lan9730i-abzj.kicad_mod",+    "lan9730i-abzj.glb",+    "lan9730i-abzj.step",+    "lan9730i-abzj.lbr",+    "docs/hero.png",+    "docs/lan9730i-abzj-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LAN9730I-ABZJ",+    "manufacturer": "Microchip Tech",+    "package": "QFN-56-EP(8x8)",+    "pin_count": 57,+    "category": "Interface",+    "subcategory": "USB Converters",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883932742103040",+    "parts": {+      "symbol": "lan9730i-abzj.kicad_sym",+      "footprint": "lan9730i-abzj.kicad_mod",+      "model_3d": "lan9730i-abzj-etched.glb",+      "model_3d_plain": "lan9730i-abzj.glb",+      "model_3d_step": "lan9730i-abzj-etched.step",+      "model_3d_step_plain": "lan9730i-abzj.step",+      "lbr": "lan9730i-abzj.lbr"+    },+    "distributor_links": {+      "lcsc": "C191152"+    },+    "pins": [+      {+        "number": "1",+        "name": "nPHY_INT",+        "type": "output",+        "description": "PHY interrupt output (active-high in Internal PHY Mode, active-low input in External PHY Mode)."+      },+      {+        "number": "2",+        "name": "TXN",+        "type": "bidirectional",+        "description": "Ethernet transmit data negative (100Ω differential pair with TXP for 100BASE-TX transmission)."+      },+      {+        "number": "3",+        "name": "TXP",+        "type": "bidirectional",+        "description": "Ethernet transmit data positive (100Ω differential pair with TXN for 100BASE-TX transmission)."+      },+      {+        "number": "4",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply for Ethernet and USB circuits."+      },+      {+        "number": "5",+        "name": "RXN",+        "type": "bidirectional",+        "description": "Ethernet receive data negative (100Ω differential pair with RXP for receiving Ethernet signals)."+      },+      {+        "number": "6",+        "name": "RXP",+        "type": "bidirectional",+        "description": "Ethernet receive data positive (100Ω differential pair with RXN for receiving Ethernet signals)."+      },+      {+        "number": "7",+        "name": "EXRES",+        "type": "input",+        "description": "External Ethernet PHY bias resistor connection point; connect 12.0 kΩ ±1.0% resistor to ground."+      },+      {+        "number": "8",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply for Ethernet and USB circuits."+      },+      {+        "number": "9",+        "name": "VDD12PLL",+        "type": "power_in",+        "description": "+1.2V power supply for Ethernet PLL circuits."+      },+      {+        "number": "10",+        "name": "HSIC_DATA",+        "type": "bidirectional",+        "description": "HSIC bidirectional double-data-rate (DDR) data signal synchronized to HSIC_STROBE per HSIC 1.0 specification."+      },+      {+        "number": "11",+        "name": "HSIC_STROBE",+        "type": "bidirectional",+        "description": "HSIC bidirectional strobe signal synchronized with HSIC_DATA per High-Speed Inter-Chip specification version 1.0."+      },+      {+        "number": "12",+        "name": "VDD12A",+        "type": "power_in",+        "description": "+1.2V power supply for HSIC interface and analog circuits; must be connected to VDD12CORE."+      },+      {+        "number": "13",+        "name": "TEST2",+        "type": "input",+        "description": "Test pin; must be connected to +3.3V for proper operation."+      },+      {+        "number": "14",+        "name": "TXER",+        "type": "output",+        "description": "Transmit error output; shows internal MII signal in Internal PHY Mode or external PHY error in External PHY Mode."+      },+      {+        "number": "15",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply for Ethernet and USB circuits."+      },+      {+        "number": "16",+        "name": "USBRBIAS",+        "type": "input",+        "description": "USB bias resistor connection point for HS transmit current and termination impedance; connect 12.0 kΩ ±1.0% to ground."+      },+      {+        "number": "17",+        "name": "VDD12USBPLL",+        "type": "power_in",+        "description": "+1.2V power supply for USB PLL; must be connected to VDD12CORE."+      },+      {+        "number": "18",+        "name": "XI",+        "type": "input",+        "description": "External 25 MHz crystal input; can alternatively be driven by single-ended 25 MHz clock oscillator (±50ppm)."+      },+      {+        "number": "19",+        "name": "XO",+        "type": "output",+        "description": "External 25 MHz crystal output; leave unconnected if using single-ended clock oscillator input on XI."+      },+      {+        "number": "20",+        "name": "SLEW_TUNE",+        "type": "input",+        "description": "HSIC slew rate boost configuration strap; low selects 40Ω driver impedance, high selects 50Ω (sampled at power-on)."+      },+      {+        "number": "21",+        "name": "VDD12CORE",+        "type": "power_in",+        "description": "+1.2V power supply for digital core logic; must be connected to VDD12USBPLL, VDD12PLL, and VDD12A."+      },+      {+        "number": "22",+        "name": "MDC/GPIO2",+        "type": "output",+        "description": "Management Data Clock output for MDIO interface or GPIO2 when programmed as general purpose I/O."+      },+      {+        "number": "23",+        "name": "MDIO/GPIO1",+        "type": "bidirectional",+        "description": "Management Data bidirectional signal for PHY management or GPIO1 programmable I/O; serves as PME_MODE_SEL in PME mode."+      },+      {+        "number": "24",+        "name": "nRESET",+        "type": "input",+        "description": "Active-low system reset input; allows external hardware to reset device and signals PME_CLEAR in PME mode."+      },+      {+        "number": "25",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply for I/O buffer circuits."+      },+      {+        "number": "26",+        "name": "nFDX_LED/GPIO8",+        "type": "output",+        "description": "Full-Duplex indicator LED output (active-low, open-drain) or GPIO8 programmable I/O; may signal PME in External PHY+PME mode."+      },+      {+        "number": "27",+        "name": "nLNKA_LED/GPIO9",+        "type": "output",+        "description": "Link Activity indicator LED output (active-low, open-drain, pulsed for activity) or GPIO9; PME_MODE_SEL in External PHY+PME mode."+      },+      {+        "number": "28",+        "name": "nSPD_LED/GPIO10",+        "type": "output",+        "description": "Speed indicator LED output (active-low for 100Mbps, open-drain) or GPIO10; wakeup pin in PME mode."+      },+      {+        "number": "29",+        "name": "EECLK",+        "type": "output",+        "description": "EEPROM serial clock output; must be pulled up externally for proper operation with external EEPROM."+      },+      {+        "number": "30",+        "name": "EECS",+        "type": "output",+        "description": "EEPROM chip select output; external pull-down resistor recommended to prevent false selection during power-up."+      },+      {+        "number": "31",+        "name": "EEDO/AUTOMDIX_EN",+        "type": "output",+        "description": "EEPROM data output (drives EEDI of external EEPROM) or Auto-MDIX enable configuration strap (latched at power-on)."+      },+      {+        "number": "32",+        "name": "EEDI",+        "type": "input",+        "description": "EEPROM data input from external serial EEPROM (driven by EEDO output of EEPROM)."+      },+      {+        "number": "33",+        "name": "TEST1",+        "type": "input",+        "description": "Test pin; must be connected to VSS (ground) for proper operation."+      },+      {+        "number": "34",+        "name": "PHY_SEL",+        "type": "input",+        "description": "PHY mode selection configuration strap (latched at power-on); 0=Internal PHY (default), 1=External PHY mode."+      },+      {+        "number": "35",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply for I/O buffer circuits."+      },+      {+        "number": "36",+        "name": "nTRST/RXD0",+        "type": "input",+        "description": "JTAG test port reset (active-low) in Internal PHY Mode or receive data 0 input from external PHY in External PHY Mode."+      },+      {+        "number": "37",+        "name": "TDO/nPHY_RST",+        "type": "output",+        "description": "JTAG test data output in Internal PHY Mode or PHY reset (active-low) output in External PHY Mode."+      },+      {+        "number": "38",+        "name": "TCK/RXD1",+        "type": "input",+        "description": "JTAG test clock input (max 25MHz) in Internal PHY Mode or receive data 1 input from external PHY in External PHY Mode."+      },+      {+        "number": "39",+        "name": "TMS/RXD2",+        "type": "input",+        "description": "JTAG test mode select in Internal PHY Mode or receive data 2 input from external PHY in External PHY Mode."+      },+      {+        "number": "40",+        "name": "TDI/RXD3",+        "type": "input",+        "description": "JTAG test data input in Internal PHY Mode or receive data 3 input from external PHY in External PHY Mode."+      },+      {+        "number": "41",+        "name": "RXCLK",+        "type": "input",+        "description": "Receive clock input from external PHY; can be programmed to display internal MII signal in Internal PHY Mode."+      },+      {+        "number": "42",+        "name": "RXDV",+        "type": "input",+        "description": "Receive data valid input from external PHY; can be programmed to display internal MII signal in Internal PHY Mode."+      },+      {+        "number": "43",+        "name": "TXEN",+        "type": "output",+        "description": "Transmit enable output to external PHY indicating valid transmit data; shows internal signal in Internal PHY Mode."+      },+      {+        "number": "44",+        "name": "RXER",+        "type": "input",+        "description": "Receive error input from external PHY; can be programmed to display internal MII signal in Internal PHY Mode."+      },+      {+        "number": "45",+        "name": "CRS/GPIO3",+        "type": "input",+        "description": "Carrier sense input from external PHY; can show internal MII signal in Internal PHY Mode or serve as GPIO3."+      },+      {+        "number": "46",+        "name": "COL/GPIO0",+        "type": "input",+        "description": "Collision detect input from external PHY; can show internal MII signal in Internal PHY Mode or serve as GPIO0 with PME capability."+      },+      {+        "number": "47",+        "name": "TXCLK",+        "type": "input",+        "description": "Transmit clock input (typically from external PHY or system oscillator) that clocks out TXD signals."+      },+      {+        "number": "48",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply for I/O buffer circuits."+      },+      {+        "number": "49",+        "name": "CORE_REG_EN",+        "type": "input",+        "description": "Internal core regulator enable; tie low to disable internal regulator (external +1.2V supply required), high to enable."+      },+      {+        "number": "50",+        "name": "VDD12CORE",+        "type": "power_in",+        "description": "+1.2V power supply for digital core logic; must be connected to VDD12USBPLL, VDD12PLL, and VDD12A."+      },+      {+        "number": "51",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply for I/O buffer circuits."+      },+      {+        "number": "52",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply for I/O buffer circuits."+      },+      {+        "number": "53",+        "name": "TXD3/GPIO7/50DRIVER_EN",+        "type": "output",+        "description": "Transmit data 3 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO7 alternative; 50DRIVER_EN HSIC impedance strap."+      },+      {+        "number": "54",+        "name": "TXD2/GPIO6/PORT_SWAP",+        "type": "output",+        "description": "Transmit data 2 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO6 alternative; PORT_SWAP HSIC strap."+      },+      {+        "number": "55",+        "name": "TXD1/GPIO5/RMT_WKP",+        "type": "output",+        "description": "Transmit data 1 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO5 alternative; RMT_WKP remote wakeup strap."+      },+      {+        "number": "56",+        "name": "TXD0/GPIO4/EEP_DISABLE",+        "type": "output",+        "description": "Transmit data 0 output to external PHY; shows internal MII signal in Internal PHY Mode; GPIO4 alternative; EEP_DISABLE EEPROM strap."+      },+      {+        "number": "57",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 36-40 (nTRST/RXD0, TDO/nPHY_RST, TCK/RXD1, TMS/RXD2, TDI/RXD3) have dual functions depending on; Pins 41-46 (RXCLK, RXDV, TXEN, RXER, CRS, COL) can show internal programmable MII signals (as output; Pins 31, 53-56 serve dual roles as both data/signal pins (EEDO, TXD0-3) AND configuration straps (AU",+          "exposed pad 57 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint",+          "19/57 pins cited to the wrong page (name found elsewhere): ['13:TEST2@p18', '26:nFDX_LED/GPIO8@p18', '27:nLNKA_LED/GPIO9@p18', '28:nSPD_LED/GPIO10@p18']"+        ],+        "pages_sent": 61,+        "cost_usd": 0.9607,+        "at": "2026-09-22T13:37:14"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883932742103040",+        "pages": 61,+        "sha256": "cf250745188f25f0",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 57,+        "described": 57,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file