← Commit history

lan9252i: factory component page (tier=mfr)

Ray ·8e96fc358d · ·parent e77f886
1 file changed +458−8
page.json+458−8
@@ -1,13 +1,468 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lan9252i",+  "title": "LAN9252I",+  "brief": "Microchip Ethernet Controllers, QFN-64-EP(9x9). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Microchip Ethernet Controllers, QFN-64-EP(9x9). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",     "lan9252i"   ],+  "component": {+    "mpn": "LAN9252I",+    "manufacturer": "Microchip",+    "package": "QFN-64-EP(9x9)",+    "pin_count": 65,+    "category": "Interface",+    "subcategory": "Ethernet Controllers",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f8544bdec1824eaffdcdf26510161b24.pdf",+    "parts": {+      "symbol": "lan9252i.kicad_sym",+      "footprint": "lan9252i.kicad_mod",+      "model_3d": "lan9252i.glb",+      "model_3d_step": "lan9252i.step",+      "lbr": "lan9252i.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "OSCI",+        "type": "input",+        "description": "External 25 MHz crystal input. Can also be driven single-ended by a clock oscillator (leave OSCO unconnected in that case)."+      },+      {+        "number": "2",+        "name": "OSCO",+        "type": "output",+        "description": "External 25 MHz crystal output."+      },+      {+        "number": "3",+        "name": "OSCVDD12",+        "type": "power_in",+        "description": "Crystal oscillator +1.2V supply. Supplied by the on-chip regulator unless REG_EN configures regulator-off mode."+      },+      {+        "number": "4",+        "name": "OSCVSS",+        "type": "power_in",+        "description": "Crystal oscillator ground."+      },+      {+        "number": "5",+        "name": "VDD33",+        "type": "power_in",+        "description": "+3.3V supply for the internal regulators. Must be supplied even if internal regulators are disabled."+      },+      {+        "number": "6",+        "name": "VDDCR",+        "type": "power_in",+        "description": "+1.2V digital core supply. Supplied by the on-chip regulator unless REG_EN configures regulator-off mode. Pin 6 needs 1 \u00b5F and 470 pF decoupling caps in parallel to ground."+      },+      {+        "number": "7",+        "name": "REG_EN",+        "type": "input",+        "description": "Regulator enable. Tie to 3.3V to enable the internal 1.2V regulators; tie low to disable and supply VDDCR/OSCVDD12 externally."+      },+      {+        "number": "8",+        "name": "FXLOSEN",+        "type": "input",+        "description": "Port A and B FX-LOS enable strap. 3-level input: <1V selects FX-SD / copper twisted pair, 1.5V selects FX-LOS on port A only, >2V selects FX-LOS on both ports."+      },+      {+        "number": "9",+        "name": "FXSDA/FXLOSA/FXSDENA",+        "type": "bidirectional",+        "description": "Port A fiber signal-detect (FXSDA, LVPECL input, >2V typ = valid), fiber loss-of-signal (FXLOSA, Schmitt input with pull-up), or FX-SD enable strap (FXSDENA, analog input; >1V typ selects FX-SD). Function selected by FXLOSEN."+      },+      {+        "number": "10",+        "name": "FXSDB/FXLOSB/FXSDENB",+        "type": "bidirectional",+        "description": "Port B fiber signal-detect (FXSDB, LVPECL input, >2V typ = valid), fiber loss-of-signal (FXLOSB, Schmitt input with pull-up), or FX-SD enable strap (FXSDENB, analog input; >1V typ selects FX-SD). Function selected by FXLOSEN."+      },+      {+        "number": "11",+        "name": "RST#",+        "type": "bidirectional",+        "description": "Active-low system reset. Input from external hardware; also driven low by the device during POR or an EtherCAT reset command sequence. Internal pull-up; open-drain output."+      },+      {+        "number": "12",+        "name": "D2/AD2/SOF/SIO2",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI-Indexed data D2, HBI-Multiplexed AD2, Digital-I/O Start-of-Frame output SOF, or SPI/SQI SIO2."+      },+      {+        "number": "13",+        "name": "D1/AD1/EOF/SO/SIO1",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D1, HBI AD1, Digital-I/O End-of-Frame output EOF, SPI serial data output SO, or SQI SIO1."+      },+      {+        "number": "14",+        "name": "VDDIO",+        "type": "power_in",+        "description": "+1.8V to +3.3V variable I/O supply."+      },+      {+        "number": "15",+        "name": "D14/AD14/DIGIO8/GPI8/GPO8/MII_TXD3/TX_SHIFT1",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D14, HBI AD14, Digital-I/O DIGIO8, SPI+GPIO GPI8/GPO8, or SPI+MII MII_TXD3 / TX_SHIFT1 strap."+      },+      {+        "number": "16",+        "name": "D13/AD13/DIGIO7/GPI7/GPO7/MII_TXD2/TX_SHIFT0",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D13, HBI AD13, Digital-I/O DIGIO7, SPI+GPIO GPI7/GPO7, or SPI+MII MII_TXD2 / TX_SHIFT0 strap."+      },+      {+        "number": "17",+        "name": "D0/AD0/WD_STATE/SI/SIO0",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D0, HBI AD0, Digital-I/O SyncManager Watchdog State output WD_STATE, SPI serial data input SI, or SQI SIO0."+      },+      {+        "number": "18",+        "name": "SYNC1/LATCH1",+        "type": "bidirectional",+        "description": "Distributed-Clock Sync1 (output) or Latch1 (input). Direction is bitwise configurable. High-impedance until EEPROM is loaded."+      },+      {+        "number": "19",+        "name": "D9/AD9/LATCH_IN/SCK",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D9, HBI AD9, Digital-I/O external data latch input LATCH_IN, or SPI/SQI serial clock SCK."+      },+      {+        "number": "20",+        "name": "VDDIO",+        "type": "power_in",+        "description": "+1.8V to +3.3V variable I/O supply."+      },+      {+        "number": "21",+        "name": "D12/AD12/DIGIO6/GPI6/GPO6/MII_TXD1",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D12, HBI AD12, Digital-I/O DIGIO6, SPI+GPIO GPI6/GPO6, or SPI+MII MII_TXD1."+      },+      {+        "number": "22",+        "name": "D11/AD11/DIGIO5/GPI5/GPO5/MII_TXD0",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D11, HBI AD11, Digital-I/O DIGIO5, SPI+GPIO GPI5/GPO5, or SPI+MII MII_TXD0."+      },+      {+        "number": "23",+        "name": "D10/AD10/DIGIO4/GPI4/GPO4/MII_TXEN",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D10, HBI AD10, Digital-I/O DIGIO4, SPI+GPIO GPI4/GPO4, or SPI+MII MII_TXEN."+      },+      {+        "number": "24",+        "name": "VDDCR",+        "type": "power_in",+        "description": "+1.2V digital core supply (regulator output or external)."+      },+      {+        "number": "25",+        "name": "A1/ALELO/OE_EXT/MII_CLK25",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI address bit A1, HBI Address-Latch-Enable Low ALELO, Digital-I/O Output-Enable OE_EXT (active low clears output data), or SPI+MII 25 MHz clock output MII_CLK25."+      },+      {+        "number": "26",+        "name": "A3/DIGIO11/GPI11/GPO11/MII_RXDV",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI address bit A3, Digital-I/O DIGIO11, SPI+GPIO GPI11/GPO11, or SPI+MII receive-data-valid MII_RXDV. No function in HBI-Multiplexed mode."+      },+      {+        "number": "27",+        "name": "A4/DIGIO12/GPI12/GPO12/MII_RXD0",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI address bit A4, Digital-I/O DIGIO12, SPI+GPIO GPI12/GPO12, or SPI+MII MII_RXD0."+      },+      {+        "number": "28",+        "name": "CS/DIGIO13/GPI13/GPO13/MII_RXD1",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI chip-select CS, Digital-I/O DIGIO13, SPI+GPIO GPI13/GPO13, or SPI+MII MII_RXD1."+      },+      {+        "number": "29",+        "name": "A2/ALEHI/DIGIO10/GPI10/GPO10/LINKACTLED2/MII_LINKPOL",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI address bit A2, HBI Address-Latch-Enable High ALEHI, Digital-I/O DIGIO10, SPI+GPIO GPI10/GPO10, SPI+MII link/activity LED port 2 LINKACTLED2, or MII link-polarity strap MII_LINKPOL."+      },+      {+        "number": "30",+        "name": "WR/ENB/DIGIO14/GPI14/GPO14/MII_RXD2",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI write strobe WR / data-enable ENB, Digital-I/O DIGIO14, SPI+GPIO GPI14/GPO14, or SPI+MII MII_RXD2."+      },+      {+        "number": "31",+        "name": "RD/RD_WR/DIGIO15/GPI15/GPO15/MII_RXD3",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI read strobe RD / read-or-write RD_WR, Digital-I/O DIGIO15, SPI+GPIO GPI15/GPO15, or SPI+MII MII_RXD3."+      },+      {+        "number": "32",+        "name": "VDDIO",+        "type": "power_in",+        "description": "+1.8V to +3.3V variable I/O supply."+      },+      {+        "number": "33",+        "name": "A0/D15/AD15/DIGIO9/GPI9/GPO9/MII_RXER",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI address bit A0 or upper data D15, HBI AD15, Digital-I/O DIGIO9, SPI+GPIO GPI9/GPO9, or SPI+MII receive-error MII_RXER."+      },+      {+        "number": "34",+        "name": "SYNC0/LATCH0",+        "type": "bidirectional",+        "description": "Distributed-Clock Sync0 (output) or Latch0 (input). Direction is bitwise configurable. High-impedance until EEPROM is loaded."+      },+      {+        "number": "35",+        "name": "D3/AD3/WD_TRIG/SIO3",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D3, HBI AD3, Digital-I/O SyncManager Watchdog Trigger output WD_TRIG, or SQI SIO3."+      },+      {+        "number": "36",+        "name": "D6/AD6/DIGIO0/GPI0/GPO0/MII_RXCLK",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D6, HBI AD6, Digital-I/O DIGIO0, SPI+GPIO GPI0/GPO0, or SPI+MII receive clock MII_RXCLK."+      },+      {+        "number": "37",+        "name": "VDDIO",+        "type": "power_in",+        "description": "+1.8V to +3.3V variable I/O supply."+      },+      {+        "number": "38",+        "name": "VDDCR",+        "type": "power_in",+        "description": "+1.2V digital core supply (regulator output or external)."+      },+      {+        "number": "39",+        "name": "D7/AD7/DIGIO1/GPI1/GPO1/MII_MDC",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D7, HBI AD7, Digital-I/O DIGIO1, SPI+GPIO GPI1/GPO1, or SPI+MII SMI clock MII_MDC."+      },+      {+        "number": "40",+        "name": "D8/AD8/DIGIO2/GPI2/GPO2/MII_MDIO",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D8, HBI AD8, Digital-I/O DIGIO2, SPI+GPIO GPI2/GPO2, or SPI+MII SMI data MII_MDIO (needs external pull-up)."+      },+      {+        "number": "41",+        "name": "TESTMODE",+        "type": "input",+        "description": "Test-mode input; must be tied to VSS for proper operation. Internal pull-down."+      },+      {+        "number": "42",+        "name": "EESDA/TMS",+        "type": "bidirectional",+        "description": "Dual-function: EEPROM I2C serial data (open-drain, requires external pull-up) or JTAG test-mode-select TMS."+      },+      {+        "number": "43",+        "name": "EESCL/TCK",+        "type": "bidirectional",+        "description": "Dual-function: EEPROM I2C serial clock (open-drain, requires external pull-up) or JTAG test-clock TCK."+      },+      {+        "number": "44",+        "name": "IRQ",+        "type": "output",+        "description": "Interrupt request output. Polarity, source, and buffer type (push-pull or open-drain) are programmable via the Interrupt Configuration Register (IRQ_CFG)."+      },+      {+        "number": "45",+        "name": "RUNLED/E2PSIZE",+        "type": "bidirectional",+        "description": "Run-LED output (open-drain/open-source, controlled by AL Status Register) and EEPROM-size configuration strap (low = 1K-16K bit, high = 32K bit-4M bit)."+      },+      {+        "number": "46",+        "name": "LINKACTLED1/TDI/CHIP_MODE1",+        "type": "bidirectional",+        "description": "Port 1 Link/Activity LED output (open-drain/open-source), JTAG test-data-input TDI, or Chip-Mode configuration strap CHIP_MODE1."+      },+      {+        "number": "47",+        "name": "VDDIO",+        "type": "power_in",+        "description": "+1.8V to +3.3V variable I/O supply."+      },+      {+        "number": "48",+        "name": "LINKACTLED0/TDO/CHIP_MODE0",+        "type": "bidirectional",+        "description": "Port 0 Link/Activity LED output (open-drain/open-source), JTAG test-data-output TDO, or Chip-Mode configuration strap CHIP_MODE0."+      },+      {+        "number": "49",+        "name": "D4/AD4/DIGIO3/GPI3/GPO3/MII_LINK",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D4, HBI AD4, Digital-I/O DIGIO3, SPI+GPIO GPI3/GPO3, or SPI+MII link-status input MII_LINK."+      },+      {+        "number": "50",+        "name": "D5/AD5/OUTVALID/SCS#",+        "type": "bidirectional",+        "description": "Chip-mode muxed: HBI D5, HBI AD5, Digital-I/O Output-Valid output OUTVALID, or SPI/SQI slave chip-select SCS# (active low, pull-up)."+      },+      {+        "number": "51",+        "name": "VDD33TXRX1",+        "type": "power_in",+        "description": "+3.3V analog supply for Port A PHY (or separate ~2.5V through magnetics)."+      },+      {+        "number": "52",+        "name": "TXNA",+        "type": "bidirectional",+        "description": "Port A twisted-pair TX/RX negative channel 1 (AIO). In fiber mode: Port A FX TX negative (OLVPECL output). MDIX may internally swap TX/RX."+      },+      {+        "number": "53",+        "name": "TXPA",+        "type": "bidirectional",+        "description": "Port A twisted-pair TX/RX positive channel 1 (AIO). In fiber mode: Port A FX TX positive (OLVPECL output). MDIX may internally swap TX/RX."+      },+      {+        "number": "54",+        "name": "RXNA",+        "type": "bidirectional",+        "description": "Port A twisted-pair TX/RX negative channel 2 (AIO). In fiber mode: Port A FX RX negative (analog input). MDIX may internally swap TX/RX."+      },+      {+        "number": "55",+        "name": "RXPA",+        "type": "bidirectional",+        "description": "Port A twisted-pair TX/RX positive channel 2 (AIO). In fiber mode: Port A FX RX positive (analog input). MDIX may internally swap TX/RX."+      },+      {+        "number": "56",+        "name": "VDD12TX1",+        "type": "power_in",+        "description": "+1.2V Port A transmitter supply. Must be tied to VDD12TX2. Supplied by on-chip regulator or an external 1.2V source."+      },+      {+        "number": "57",+        "name": "RBIAS",+        "type": "passive",+        "description": "Bias reference. Connect through a 12.1 k\u03a9 \u00b11% resistor to ground (nominal 1.2V, ~1 mW dissipation)."+      },+      {+        "number": "58",+        "name": "VDD33BIAS",+        "type": "power_in",+        "description": "+3.3V master-bias analog supply."+      },+      {+        "number": "59",+        "name": "VDD12TX2",+        "type": "power_in",+        "description": "+1.2V Port B transmitter supply. Must be tied to VDD12TX1. Supplied by on-chip regulator or an external 1.2V source."+      },+      {+        "number": "60",+        "name": "RXPB",+        "type": "bidirectional",+        "description": "Port B twisted-pair TX/RX positive channel 2 (AIO). In fiber mode: Port B FX RX positive (analog input). MDIX may internally swap TX/RX."+      },+      {+        "number": "61",+        "name": "RXNB",+        "type": "bidirectional",+        "description": "Port B twisted-pair TX/RX negative channel 2 (AIO). In fiber mode: Port B FX RX negative (analog input). MDIX may internally swap TX/RX."+      },+      {+        "number": "62",+        "name": "TXPB",+        "type": "bidirectional",+        "description": "Port B twisted-pair TX/RX positive channel 1 (AIO). In fiber mode: Port B FX TX positive (OLVPECL output). MDIX may internally swap TX/RX."+      },+      {+        "number": "63",+        "name": "TXNB",+        "type": "bidirectional",+        "description": "Port B twisted-pair TX/RX negative channel 1 (AIO). In fiber mode: Port B FX TX negative (OLVPECL output). MDIX may internally swap TX/RX."+      },+      {+        "number": "64",+        "name": "VDD33TXRX2",+        "type": "power_in",+        "description": "+3.3V analog supply for Port B PHY (or separate ~2.5V through magnetics)."+      },+      {+        "number": "EP",+        "name": "VSS",+        "type": "power_in",+        "description": "Exposed pad, common ground. Must be connected to the ground plane with a via array."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/f8544bdec1824eaffdcdf26510161b24.pdf",+        "pages": 329,+        "sha256": "562783e8c3ae2843",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 65,+        "described": 65,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Microchip",+      "Package": "QFN-64-EP(9x9)",+      "Category": "Interface",+      "Pins": "65"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lan9252i"+  ],+  "discovery_pitch": "LAN9252I (Microchip) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +480,5 @@     "docs/lan9252i-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file