← Commit history

Initial commit: component/l9396

Ray ·d33b93b270 ·
2 files changed +587
README.mdadded+101
@@ -0,0 +1,101 @@+# L9396++**STMicroelectronics** · Power Management - Specialized · TQFP-64-EP(10x10)++L9396 from STMicroelectronics, in a TQFP-64-EP(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AI4 | input | Analog input to ADC converter for external signal measurement in 0.2V to 5V range. |+| 2 | AI3 | input | Analog input to ADC converter for external signal measurement in 0.2V to 5V range. |+| 3 | AI2 | input | Analog input to ADC converter for external signal measurement in 0.2V to 5V range. |+| 4 | AI1 | input | Input 1 to select VCORE regulator function via pull-down configuration at power-up. |+| 5 | AI0 | input | Input 0 to select VCORE regulator function via pull-down configuration at power-up. |+| 6 | RSUL0 | input | WSS ground return and current sink for wheel speed sensor channel 0; used for low-side current measurement and open/short diagnostics. |+| 7 | RSUH0 | power_out | WSS regulated output for wheel speed sensor channel 0 or tracking regulator supply tracking VCC/VCC5 rail. |+| 8 | RSUL1 | input | WSS ground return and current sink for wheel speed sensor channel 1; used for low-side current measurement and open/short diagnostics. |+| 9 | RSUH1 | power_out | WSS regulated output for wheel speed sensor channel 1 or tracking regulator supply tracking VCC/VCC5 rail. |+| 10 | RSUL2 | input | WSS ground return and current sink for wheel speed sensor channel 2; used for low-side current measurement and open/short diagnostics. |+| 11 | RSUH2 | power_out | WSS output for wheel speed sensor channel 2 with integrated current limiting and short-to-battery protection. |+| 12 | RSUL3 | input | WSS ground return and current sink for wheel speed sensor channel 3; used for low-side current measurement and open/short diagnostics. |+| 13 | RSUH3 | power_out | WSS output for wheel speed sensor channel 3 with integrated current limiting and short-to-battery protection. |+| 14 | GNDA | power_in | Analog ground reference for all analog circuit blocks and voltage comparators. |+| 15 | GPOD0 | output | GPO driver low-side output drain terminal with programmable PWM control and ON/OFF capability; sinks up to 145mA with current limiting. |+| 16 | PDI | input | Motor pump high-side FET logic input for fail-safe control of external pump motor driver. |+| 17 | PRI | input | Motor pump recirculation FET logic input for fail-safe control of external recirculation path. |+| 18 | PRG | output | Motor pump recirculation FET gate drive output floating to PRS with 15-35mA source and sink capability. |+| 19 | PRS | input | Motor pump recirculation FET source pin connection for floating gate drive reference. |+| 20 | PDG | output | Motor pump high-side FET gate drive output floating to PDS with 15-35mA source and sink capability and integrated diagnostics. |+| 21 | PDS | input | Motor pump high-side FET source pin connection for floating gate drive reference; internal pull-up for diagnostics. |+| 22 | PDBATT | input | Battery sense input for motor pump high-side FET pre-driver drain-source monitoring and over-current detection. |+| 23 | VB_SW | output | Battery protected switch output providing switched battery voltage to external loads up to 150mA; controlled via SPI with over-current shutdown. |+| 24 | VB | power_in | Battery line input from 4.5V to 19V with integrated protection against load-dump transients and over-voltage. |+| 25 | VDBATT | input | Battery sense input for fail-safe FET pre-driver drain-source voltage monitoring and over-current detection. |+| 26 | VDG | output | Fail-safe FET gate drive output floating to VDS with 1-2mA source and 5-9mA sink capability. |+| 27 | VDS | input | Fail-safe FET source pin connection for floating gate drive reference and drain-source monitoring. |+| 28 | WDTDIS | input | Watchdog timer disable input; when driven high (>1.75V), disables WD2 timer and resets watchdog counter. |+| 29 | VBM | input | Battery voltage measurement sense input with 10:1 divider ratio for ADC monitoring of battery rail. |+| 30 | IGN | input | Wake-up input pin for battery connection detection; rising edge >3.5V triggers power-up sequence with 0.1V/µs minimum slew rate. |+| 31 | VCOREFDBK | input | VCORE voltage feedback input for external voltage divider providing 0.8V reference with ±3% typical accuracy. |+| 32 | VCORE | power_out | Microcontroller core voltage supply output from 0.8V to 5V; configurable via external resistor divider and AI0/AI1 inputs. |+| 33 | SCORE | bidirectional | Source pin for external VCORE buck/linear regulator FET with bootstrap capacitor connection for gate drive. |+| 34 | GCORE | bidirectional | Gate control output for external VCORE regulator FET with integrated pull-down and voltage clamp to 8-12V. |+| 35 | CBS | bidirectional | Bootstrap capacitor connection terminal for VCORE gate drive circuitry; 100nF external capacitor recommended. |+| 36 | I_CORE_SL | input | Shunt resistor low-side input for VCORE current sensing and over-current detection in linear mode operation. |+| 37 | I_CORE_SH | input | Shunt resistor high-side input for VCORE current sensing and over-current detection in buck/linear mode operation. |+| 38 | VCC | power_out | Microcontroller I/O supply output configurable to 3.3V or 5V via VCCSEL input pin; 100mA maximum load. |+| 39 | VCC5 | power_out | Fixed 5V microcontroller I/O and ADC supply output with 250mA maximum load and integrated thermal protection. |+| 40 | VPREREG | power_out | Integrated buck pre-regulator output providing 6.5V or 7.2V (selectable via SPI) with 1A maximum current capability. |+| 41 | VCCSEL | input | Voltage selection input for VCC regulator configuration; high selects 5V, low selects 3.3V (latched at power-up). |+| 42 | BCKSW | output | Switched pre-regulator output node for external buck LC filter; connects internal high-side FET switch to external inductor. |+| 43 | VBST | power_in | Device internal battery/boost supply rail from 6V to 19V; connects to VB directly when boost disabled or boost regulator output when enabled. |+| 44 | CP | power_out | Charge pump high-voltage output supplying gate drive circuits with 8.9-11V typical output for VBST >8.55V. |+| 45 | VC4 | passive | Charge pump second-stage capacitor high terminal; external 68nF switching capacitor required. |+| 46 | VC3 | passive | Charge pump second-stage capacitor low terminal; external 68nF switching capacitor required. |+| 47 | VC2 | passive | Charge pump first-stage capacitor high terminal; external 68nF switching capacitor required. |+| 48 | VC1 | passive | Charge pump first-stage capacitor low terminal; external 68nF switching capacitor required. |+| 49 | RESET | output | Active-low reset output driven from SSM_RESET state machine; open-drain output with external 5kΩ pull-up recommended. |+| 50 | FSN | output | Fail-safe negated output; active-low signal indicating device fail-safe mode due to voltage, thermal, or watchdog faults. |+| 51 | BSTSW | output | Switched boost regulator output node connecting internal boost FET to external inductor for 9V boost regulation. |+| 52 | GNDBST | power_in | Boost regulator ground reference isolated from digital/analog grounds; return path for boost switch and inductor. |+| 53 | NU | input | Not used pin; must be connected to ground voltage for proper IC operation and ESD protection. |+| 54 | GNDD | power_in | Digital logic ground reference with protection against ground loss; minimum threshold 300mV above GNDA triggers reset. |+| 55 | SDO | output | SPI data output providing 32-bit response frames with 3-bit CRC at up to 6MHz clock frequency. |+| 56 | SDI | input | SPI data input accepting 32-bit command frames with 3-bit CRC at up to 6MHz clock frequency. |+| 57 | CLK | input | SPI serial clock input up to 6MHz; timing controlled by master microcontroller. |+| 58 | PRN | input | Microcontroller clock signal input for WD2 second watchdog frequency validation at 91Hz to 1500Hz selectable range. |+| 59 | CS | input | SPI chip select active-low input; enables SDI/SDO communication when driven low during 32-bit frame transfer. |+| 60 | WSO0 | output | WSS pass-through output channel 0; digital output of decoded wheel speed sensor data or test patterns. |+| 61 | WSO1 | output | WSS pass-through output channel 1; digital output of decoded wheel speed sensor data or test patterns. |+| 62 | WSO2 | output | WSS pass-through output channel 2; digital output of decoded wheel speed sensor data or test patterns. |+| 63 | WSO3 | output | WSS pass-through output channel 3; digital output of decoded wheel speed sensor data or test patterns. |+| 64 | FAULT | output | General fault output; push-pull digital output indicating watchdog errors or configurable fault/thermal conditions; enabled only after power-up completion. |+| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TQFP-64-EP(10x10) |+| Category | Power Management (PMIC) |+| Pins | 65 |++## CAD (KiCad official)++- Symbol: `L9396`+- Footprint: `Package_QFP:TQFP-64-1EP_10x10mm_P0.5mm_EP5.305x5.305mm`+- 3D model: TQFP-64-EP(10x10) (KiCad packages3D, STEP)+- 3D model files: `l9396-etched.step` / `l9396-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l9396.step` / `l9396.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/l9396.pdf) (109 pp, sha256 `f657f672d1da9fef`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l9396-datasheet.pdf)
page.jsonadded+486
@@ -0,0 +1,486 @@+{+  "slug": "l9396",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Power Management - Specialized, TQFP-64-EP(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "l9396",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "l9396.kicad_sym",+    "l9396.kicad_mod",+    "l9396.glb",+    "l9396.step",+    "l9396.lbr",+    "docs/hero.png",+    "docs/l9396-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "L9396",+    "manufacturer": "STMicroelectronics",+    "package": "TQFP-64-EP(10x10)",+    "pin_count": 65,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Management - Specialized",+    "datasheet": "https://www.st.com/resource/en/datasheet/l9396.pdf",+    "parts": {+      "symbol": "l9396.kicad_sym",+      "footprint": "l9396.kicad_mod",+      "model_3d": "l9396-etched.glb",+      "model_3d_plain": "l9396.glb",+      "model_3d_step": "l9396-etched.step",+      "model_3d_step_plain": "l9396.step",+      "lbr": "l9396.lbr"+    },+    "distributor_links": {+      "lcsc": "C2970000"+    },+    "pins": [+      {+        "number": "1",+        "name": "AI4",+        "type": "input",+        "description": "Analog input to ADC converter for external signal measurement in 0.2V to 5V range."+      },+      {+        "number": "2",+        "name": "AI3",+        "type": "input",+        "description": "Analog input to ADC converter for external signal measurement in 0.2V to 5V range."+      },+      {+        "number": "3",+        "name": "AI2",+        "type": "input",+        "description": "Analog input to ADC converter for external signal measurement in 0.2V to 5V range."+      },+      {+        "number": "4",+        "name": "AI1",+        "type": "input",+        "description": "Input 1 to select VCORE regulator function via pull-down configuration at power-up."+      },+      {+        "number": "5",+        "name": "AI0",+        "type": "input",+        "description": "Input 0 to select VCORE regulator function via pull-down configuration at power-up."+      },+      {+        "number": "6",+        "name": "RSUL0",+        "type": "input",+        "description": "WSS ground return and current sink for wheel speed sensor channel 0; used for low-side current measurement and open/short diagnostics."+      },+      {+        "number": "7",+        "name": "RSUH0",+        "type": "power_out",+        "description": "WSS regulated output for wheel speed sensor channel 0 or tracking regulator supply tracking VCC/VCC5 rail."+      },+      {+        "number": "8",+        "name": "RSUL1",+        "type": "input",+        "description": "WSS ground return and current sink for wheel speed sensor channel 1; used for low-side current measurement and open/short diagnostics."+      },+      {+        "number": "9",+        "name": "RSUH1",+        "type": "power_out",+        "description": "WSS regulated output for wheel speed sensor channel 1 or tracking regulator supply tracking VCC/VCC5 rail."+      },+      {+        "number": "10",+        "name": "RSUL2",+        "type": "input",+        "description": "WSS ground return and current sink for wheel speed sensor channel 2; used for low-side current measurement and open/short diagnostics."+      },+      {+        "number": "11",+        "name": "RSUH2",+        "type": "power_out",+        "description": "WSS output for wheel speed sensor channel 2 with integrated current limiting and short-to-battery protection."+      },+      {+        "number": "12",+        "name": "RSUL3",+        "type": "input",+        "description": "WSS ground return and current sink for wheel speed sensor channel 3; used for low-side current measurement and open/short diagnostics."+      },+      {+        "number": "13",+        "name": "RSUH3",+        "type": "power_out",+        "description": "WSS output for wheel speed sensor channel 3 with integrated current limiting and short-to-battery protection."+      },+      {+        "number": "14",+        "name": "GNDA",+        "type": "power_in",+        "description": "Analog ground reference for all analog circuit blocks and voltage comparators."+      },+      {+        "number": "15",+        "name": "GPOD0",+        "type": "output",+        "description": "GPO driver low-side output drain terminal with programmable PWM control and ON/OFF capability; sinks up to 145mA with current limiting."+      },+      {+        "number": "16",+        "name": "PDI",+        "type": "input",+        "description": "Motor pump high-side FET logic input for fail-safe control of external pump motor driver."+      },+      {+        "number": "17",+        "name": "PRI",+        "type": "input",+        "description": "Motor pump recirculation FET logic input for fail-safe control of external recirculation path."+      },+      {+        "number": "18",+        "name": "PRG",+        "type": "output",+        "description": "Motor pump recirculation FET gate drive output floating to PRS with 15-35mA source and sink capability."+      },+      {+        "number": "19",+        "name": "PRS",+        "type": "input",+        "description": "Motor pump recirculation FET source pin connection for floating gate drive reference."+      },+      {+        "number": "20",+        "name": "PDG",+        "type": "output",+        "description": "Motor pump high-side FET gate drive output floating to PDS with 15-35mA source and sink capability and integrated diagnostics."+      },+      {+        "number": "21",+        "name": "PDS",+        "type": "input",+        "description": "Motor pump high-side FET source pin connection for floating gate drive reference; internal pull-up for diagnostics."+      },+      {+        "number": "22",+        "name": "PDBATT",+        "type": "input",+        "description": "Battery sense input for motor pump high-side FET pre-driver drain-source monitoring and over-current detection."+      },+      {+        "number": "23",+        "name": "VB_SW",+        "type": "output",+        "description": "Battery protected switch output providing switched battery voltage to external loads up to 150mA; controlled via SPI with over-current shutdown."+      },+      {+        "number": "24",+        "name": "VB",+        "type": "power_in",+        "description": "Battery line input from 4.5V to 19V with integrated protection against load-dump transients and over-voltage."+      },+      {+        "number": "25",+        "name": "VDBATT",+        "type": "input",+        "description": "Battery sense input for fail-safe FET pre-driver drain-source voltage monitoring and over-current detection."+      },+      {+        "number": "26",+        "name": "VDG",+        "type": "output",+        "description": "Fail-safe FET gate drive output floating to VDS with 1-2mA source and 5-9mA sink capability."+      },+      {+        "number": "27",+        "name": "VDS",+        "type": "input",+        "description": "Fail-safe FET source pin connection for floating gate drive reference and drain-source monitoring."+      },+      {+        "number": "28",+        "name": "WDTDIS",+        "type": "input",+        "description": "Watchdog timer disable input; when driven high (>1.75V), disables WD2 timer and resets watchdog counter."+      },+      {+        "number": "29",+        "name": "VBM",+        "type": "input",+        "description": "Battery voltage measurement sense input with 10:1 divider ratio for ADC monitoring of battery rail."+      },+      {+        "number": "30",+        "name": "IGN",+        "type": "input",+        "description": "Wake-up input pin for battery connection detection; rising edge >3.5V triggers power-up sequence with 0.1V/µs minimum slew rate."+      },+      {+        "number": "31",+        "name": "VCOREFDBK",+        "type": "input",+        "description": "VCORE voltage feedback input for external voltage divider providing 0.8V reference with ±3% typical accuracy."+      },+      {+        "number": "32",+        "name": "VCORE",+        "type": "power_out",+        "description": "Microcontroller core voltage supply output from 0.8V to 5V; configurable via external resistor divider and AI0/AI1 inputs."+      },+      {+        "number": "33",+        "name": "SCORE",+        "type": "bidirectional",+        "description": "Source pin for external VCORE buck/linear regulator FET with bootstrap capacitor connection for gate drive."+      },+      {+        "number": "34",+        "name": "GCORE",+        "type": "bidirectional",+        "description": "Gate control output for external VCORE regulator FET with integrated pull-down and voltage clamp to 8-12V."+      },+      {+        "number": "35",+        "name": "CBS",+        "type": "bidirectional",+        "description": "Bootstrap capacitor connection terminal for VCORE gate drive circuitry; 100nF external capacitor recommended."+      },+      {+        "number": "36",+        "name": "I_CORE_SL",+        "type": "input",+        "description": "Shunt resistor low-side input for VCORE current sensing and over-current detection in linear mode operation."+      },+      {+        "number": "37",+        "name": "I_CORE_SH",+        "type": "input",+        "description": "Shunt resistor high-side input for VCORE current sensing and over-current detection in buck/linear mode operation."+      },+      {+        "number": "38",+        "name": "VCC",+        "type": "power_out",+        "description": "Microcontroller I/O supply output configurable to 3.3V or 5V via VCCSEL input pin; 100mA maximum load."+      },+      {+        "number": "39",+        "name": "VCC5",+        "type": "power_out",+        "description": "Fixed 5V microcontroller I/O and ADC supply output with 250mA maximum load and integrated thermal protection."+      },+      {+        "number": "40",+        "name": "VPREREG",+        "type": "power_out",+        "description": "Integrated buck pre-regulator output providing 6.5V or 7.2V (selectable via SPI) with 1A maximum current capability."+      },+      {+        "number": "41",+        "name": "VCCSEL",+        "type": "input",+        "description": "Voltage selection input for VCC regulator configuration; high selects 5V, low selects 3.3V (latched at power-up)."+      },+      {+        "number": "42",+        "name": "BCKSW",+        "type": "output",+        "description": "Switched pre-regulator output node for external buck LC filter; connects internal high-side FET switch to external inductor."+      },+      {+        "number": "43",+        "name": "VBST",+        "type": "power_in",+        "description": "Device internal battery/boost supply rail from 6V to 19V; connects to VB directly when boost disabled or boost regulator output when enabled."+      },+      {+        "number": "44",+        "name": "CP",+        "type": "power_out",+        "description": "Charge pump high-voltage output supplying gate drive circuits with 8.9-11V typical output for VBST >8.55V."+      },+      {+        "number": "45",+        "name": "VC4",+        "type": "passive",+        "description": "Charge pump second-stage capacitor high terminal; external 68nF switching capacitor required."+      },+      {+        "number": "46",+        "name": "VC3",+        "type": "passive",+        "description": "Charge pump second-stage capacitor low terminal; external 68nF switching capacitor required."+      },+      {+        "number": "47",+        "name": "VC2",+        "type": "passive",+        "description": "Charge pump first-stage capacitor high terminal; external 68nF switching capacitor required."+      },+      {+        "number": "48",+        "name": "VC1",+        "type": "passive",+        "description": "Charge pump first-stage capacitor low terminal; external 68nF switching capacitor required."+      },+      {+        "number": "49",+        "name": "RESET",+        "type": "output",+        "description": "Active-low reset output driven from SSM_RESET state machine; open-drain output with external 5kΩ pull-up recommended."+      },+      {+        "number": "50",+        "name": "FSN",+        "type": "output",+        "description": "Fail-safe negated output; active-low signal indicating device fail-safe mode due to voltage, thermal, or watchdog faults."+      },+      {+        "number": "51",+        "name": "BSTSW",+        "type": "output",+        "description": "Switched boost regulator output node connecting internal boost FET to external inductor for 9V boost regulation."+      },+      {+        "number": "52",+        "name": "GNDBST",+        "type": "power_in",+        "description": "Boost regulator ground reference isolated from digital/analog grounds; return path for boost switch and inductor."+      },+      {+        "number": "53",+        "name": "NU",+        "type": "input",+        "description": "Not used pin; must be connected to ground voltage for proper IC operation and ESD protection."+      },+      {+        "number": "54",+        "name": "GNDD",+        "type": "power_in",+        "description": "Digital logic ground reference with protection against ground loss; minimum threshold 300mV above GNDA triggers reset."+      },+      {+        "number": "55",+        "name": "SDO",+        "type": "output",+        "description": "SPI data output providing 32-bit response frames with 3-bit CRC at up to 6MHz clock frequency."+      },+      {+        "number": "56",+        "name": "SDI",+        "type": "input",+        "description": "SPI data input accepting 32-bit command frames with 3-bit CRC at up to 6MHz clock frequency."+      },+      {+        "number": "57",+        "name": "CLK",+        "type": "input",+        "description": "SPI serial clock input up to 6MHz; timing controlled by master microcontroller."+      },+      {+        "number": "58",+        "name": "PRN",+        "type": "input",+        "description": "Microcontroller clock signal input for WD2 second watchdog frequency validation at 91Hz to 1500Hz selectable range."+      },+      {+        "number": "59",+        "name": "CS",+        "type": "input",+        "description": "SPI chip select active-low input; enables SDI/SDO communication when driven low during 32-bit frame transfer."+      },+      {+        "number": "60",+        "name": "WSO0",+        "type": "output",+        "description": "WSS pass-through output channel 0; digital output of decoded wheel speed sensor data or test patterns."+      },+      {+        "number": "61",+        "name": "WSO1",+        "type": "output",+        "description": "WSS pass-through output channel 1; digital output of decoded wheel speed sensor data or test patterns."+      },+      {+        "number": "62",+        "name": "WSO2",+        "type": "output",+        "description": "WSS pass-through output channel 2; digital output of decoded wheel speed sensor data or test patterns."+      },+      {+        "number": "63",+        "name": "WSO3",+        "type": "output",+        "description": "WSS pass-through output channel 3; digital output of decoded wheel speed sensor data or test patterns."+      },+      {+        "number": "64",+        "name": "FAULT",+        "type": "output",+        "description": "General fault output; push-pull digital output indicating watchdog errors or configurable fault/thermal conditions; enabled only after power-up completion."+      },+      {+        "number": "65",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 43 (VBST) is marked as both power input and power output; can be sourced by external battery (pr; Pin 53 (NU - Not Used) must be connected to ground per datasheet specification despite being marked ; Pins 42 (BCKSW) and 51 (BSTSW) are internal switching nodes of buck/boost regulators marked as I/O b",+          "exposed pad 65 added from the footprint"+        ],+        "pages_sent": 109,+        "cost_usd": 1.0669,+        "at": "2026-09-23T18:37:26"+      },+      "datasheet": {+        "url": "https://www.st.com/resource/en/datasheet/l9396.pdf",+        "pages": 109,+        "sha256": "f657f672d1da9fef",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 65,+        "described": 65,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file