component
L78L05ACZTR
Public Made by Adomby adom
STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-92-2.54mm. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -32,19 +32,19 @@ "number": "1", "name": "VOUT", "type": "power_out",- "description": "Regulated +5 V output pin, capable of sourcing up to 100 mA. A 0.1 \u00b5F ceramic capacitor to GND is recommended for output stability and transient response."+ "description": "Regulated +5 V output pin, capable of sourcing up to 100 mA. A 0.1 µF ceramic capacitor to GND is recommended for output stability and transient response." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Common ground reference for the input and output. On SOT-89 this pin is also the thermal tab, so PCB copper area on this pin dominates junction-to-ambient thermal performance (RthJA \u2248 55 \u00b0C/W with 6 cm\u00b2 Cu)."+ "description": "Common ground reference for the input and output. On SOT-89 this pin is also the thermal tab, so PCB copper area on this pin dominates junction-to-ambient thermal performance (RthJA ≈ 55 °C/W with 6 cm² Cu)." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Unregulated positive input voltage. Absolute maximum 30 V for the 5 V output variant; typical operating range gives >2 V of dropout headroom above VOUT. A 0.33 \u00b5F input capacitor to GND is recommended, especially if the regulator is located far from the bulk supply capacitor."+ "description": "Unregulated positive input voltage. Absolute maximum 30 V for the 5 V output variant; typical operating range gives >2 V of dropout headroom above VOUT. A 0.33 µF input capacitor to GND is recommended, especially if the regulator is located far from the bulk supply capacitor." } ], "provenance": {@@ -108,5 +108,8 @@ "docs/l78l05acztr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }