← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# L6920DBTR++**STMicroelectronics** · DC-DC Converters · MSOP-8++L6920DBTR from STMicroelectronics, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FB | input | Output voltage selector / feedback. Tie FB to GND for Vout = 5 V fixed, tie FB to OUT for Vout = 3.3 V fixed, or connect FB to an external resistor divider from OUT for adjustable output (1.8 V to 5.2 V). FB reference is 1.23 V. |+| 2 | LBI | input | Low-battery detector input. Compared against the internal 1.23 V threshold; drive from a resistor divider off the battery to set the desired low-battery trip point. |+| 3 | LBO | output | Low-battery detector output (active-low, open-drain). Goes low when the LBI voltage falls below the internal ~1.23 V threshold. Requires an external pull-up resistor (about 200 kΩ) for correct operation. |+| 4 | REF | output | 1.23 V internal reference voltage output. Bypass to GND with a 100 nF capacitor to filter high-frequency noise; no capacitor is strictly required for stability. |+| 5 | SHDN | input | Active-low shutdown control. Device is in shutdown when SHDN < 0.2 V and operating when SHDN > 0.6 V. Shutdown current is ≤ 1 µA. |+| 6 | GND | power_in | Device ground reference. |+| 7 | LX | passive | Step-up inductor / switch node. Connects to the external boost inductor between VBATT and LX; carries the internal synchronous rectifier switch nodes. Peak switch current limit typically 0.8 A. |+| 8 | OUT | power_out | Regulated boost converter power output. Delivers 3.3 V or 5 V fixed (per FB strap) or 1.8-5.2 V adjustable; bypass with a low-ESR output capacitor (e.g. 47 µF). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | MSOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `L6920DBTR`++## CAD (KiCad official)++- Symbol: `L6920DBTR`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/l6920dbtr.pdf) (16 pp, sha256 `ff4d5f1b31c1b070`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l6920dbtr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "l6920dbtr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics DC-DC Converters, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "l6920dbtr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "l6920dbtr.kicad_sym",+ "l6920dbtr.kicad_mod",+ "l6920dbtr.glb",+ "l6920dbtr.step",+ "l6920dbtr.lbr",+ "docs/hero.png",+ "docs/l6920dbtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}