component
L6563TR
Public Made by Adomby adom
STMicroelectronics AC-DC Controllers And Regulators, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# L6563TR++**STMicroelectronics** · AC-DC Controllers And Regulators · SOIC-14++L6563TR from STMicroelectronics, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INV | input | Inverting input of error amplifier that receives output voltage feedback and sinks tracking boost current. |+| 2 | COMP | output | Error amplifier output to which a compensation network must be connected for loop stability. |+| 3 | MULT | input | Rectified mains voltage input (0-3V range) to multiplier used for sinusoidal current reference and RMS voltage derivation. |+| 4 | CS | input | Current sense input with 1.7V threshold for abnormal current detection and inductor saturation protection. |+| 5 | VFF | input | Multiplier feedforward input requiring 1µF capacitor and parallel resistor to GND for 1/V² compensation peak-holding circuit. |+| 6 | TBO | output | Tracking boost output providing buffered VFF where current sunk through external resistor to GND adjusts output voltage. |+| 7 | PFC_OK | input | Output voltage monitor where >2.5V triggers latched shutdown and <0.2V triggers non-latched shutdown (restarts >0.26V). |+| 8 | PWM_LATCH | tri_state | Open-drain fault output that asserts high when PFC_OK >2.5V or CS >1.7V in L6563. |+| 9 | PWM_STOP | tri_state | Open-drain output that is pulled low when RUN <0.52V to temporarily stop DC-DC converter operation. |+| 10 | RUN | input | ON/OFF control input with 0.52V shutdown and 0.6V restart thresholds for brownout or discrete enable control. |+| 11 | ZCD | input | Zero current detector input for boost inductor demagnetization sensing where negative edge triggers MOSFET turn-on. |+| 12 | GND | power_in | Ground pin providing current return path for signal and gate driver circuit sections. |+| 13 | GD | output | Gate driver output with totem-pole stage providing 600mA source and 800mA sink current with ~12V high-level clamp. |+| 14 | VCC | power_in | Supply voltage input with 10.3-22V operating range after turn-on at 11-13V with 2.3-2.7V hysteresis. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-14 |+| Category | Power Management (PMIC) |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `L6563TR`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)+- 3D model files: `l6563tr-etched.step` / `l6563tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6563tr.step` / `l6563tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586192324813082624) (39 pp, sha256 `867a46c1733f77b9`, retrieved 2026-10-05, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l6563tr-datasheet.pdf)
page.jsonadded+194@@ -0,0 +1,194 @@+{+ "slug": "l6563tr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics AC-DC Controllers And Regulators, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "l6563tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "l6563tr.kicad_sym",+ "l6563tr.kicad_mod",+ "l6563tr.glb",+ "l6563tr.step",+ "l6563tr.lbr",+ "docs/hero.png",+ "docs/l6563tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "l6563tr-hero.glb",+ "l6563tr-hero.overlay.json"+ ],+ "component": {+ "mpn": "L6563TR",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "Power Management (PMIC)",+ "subcategory": "AC-DC Controllers And Regulators",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586192324813082624",+ "parts": {+ "symbol": "l6563tr.kicad_sym",+ "footprint": "l6563tr.kicad_mod",+ "model_3d": "l6563tr-hero.glb",+ "model_3d_plain": "l6563tr.glb",+ "model_3d_step": "l6563tr-etched.step",+ "model_3d_step_plain": "l6563tr.step",+ "lbr": "l6563tr.lbr"+ },+ "distributor_links": {+ "lcsc": 38618,+ "digikey": "497-L6563TR-ND",+ "mouser": "511-L6563TR"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T22:06:04Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-L6563TR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-L6563TR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "INV",+ "type": "input",+ "description": "Inverting input of error amplifier that receives output voltage feedback and sinks tracking boost current."+ },+ {+ "number": "2",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output to which a compensation network must be connected for loop stability."+ },+ {+ "number": "3",+ "name": "MULT",+ "type": "input",+ "description": "Rectified mains voltage input (0-3V range) to multiplier used for sinusoidal current reference and RMS voltage derivation."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Current sense input with 1.7V threshold for abnormal current detection and inductor saturation protection."+ },+ {+ "number": "5",+ "name": "VFF",+ "type": "input",+ "description": "Multiplier feedforward input requiring 1µF capacitor and parallel resistor to GND for 1/V² compensation peak-holding circuit."+ },+ {+ "number": "6",+ "name": "TBO",+ "type": "output",+ "description": "Tracking boost output providing buffered VFF where current sunk through external resistor to GND adjusts output voltage."+ },+ {+ "number": "7",+ "name": "PFC_OK",+ "type": "input",+ "description": "Output voltage monitor where >2.5V triggers latched shutdown and <0.2V triggers non-latched shutdown (restarts >0.26V)."+ },+ {+ "number": "8",+ "name": "PWM_LATCH",+ "type": "tri_state",+ "description": "Open-drain fault output that asserts high when PFC_OK >2.5V or CS >1.7V in L6563."+ },+ {+ "number": "9",+ "name": "PWM_STOP",+ "type": "tri_state",+ "description": "Open-drain output that is pulled low when RUN <0.52V to temporarily stop DC-DC converter operation."+ },+ {+ "number": "10",+ "name": "RUN",+ "type": "input",+ "description": "ON/OFF control input with 0.52V shutdown and 0.6V restart thresholds for brownout or discrete enable control."+ },+ {+ "number": "11",+ "name": "ZCD",+ "type": "input",+ "description": "Zero current detector input for boost inductor demagnetization sensing where negative edge triggers MOSFET turn-on."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin providing current return path for signal and gate driver circuit sections."+ },+ {+ "number": "13",+ "name": "GD",+ "type": "output",+ "description": "Gate driver output with totem-pole stage providing 600mA source and 800mA sink current with ~12V high-level clamp."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage input with 10.3-22V operating range after turn-on at 11-13V with 2.3-2.7V hysteresis."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 11,+ "cost_usd": 0.1389,+ "at": "2026-10-05T22:05:48"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586192324813082624",+ "pages": 39,+ "sha256": "867a46c1733f77b9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}