← Commit history

Initial commit: component/l6506d013tr

Ray ·24d54f128b ·
2 files changed +271
README.mdadded+56
@@ -0,0 +1,56 @@+# L6506D013TR++**STMicroelectronics** · Stepper Motor Driver · SOIC-20-300mil++L6506D013TR from STMicroelectronics, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | R/C | passive | External R-C timing network input that sets the on-chip oscillator frequency (f = 1/(0.69·R·C) for R>10kΩ). |+| 2 | OSC. | passive | Oscillator node with internal discharge resistor of 1kΩ ±30% switching between the lower (0.33·VCC) and upper (0.66·VCC) thresholds; sets oscillator frequency range 5 to 70kHz. |+| 3 | SYNC | bidirectional | Synchronization pin; connecting the sync pins of multiple L6506 devices to the master's oscillator output allows the master to set the operating frequency of all chips. |+| 4 | POWER ENABLE | input | TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) that enables the four output drivers. |+| 5 | IN 1 | input | TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 1 (OUT1) through the internal AND gate/flip-flop. |+| 6 | IN 2 | input | TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 2 (OUT2) through the internal AND gate/flip-flop. |+| 7 | IN 3 | input | TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 3 (OUT3) through the internal AND gate/flip-flop. |+| 8 | IN 4 | input | TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 4 (OUT4) through the internal AND gate/flip-flop. |+| 9 | GND | power_in | Ground reference pin for the device. |+| 10 | N.C. | unconnected | Not internally connected pin (package pin present on SO20 but unused by the die). |+| 11 | N.C. | unconnected | Not internally connected pin (package pin present on SO20 but unused by the die). |+| 12 | VSENSE 1 | input | Comparator input sensing the voltage across the external current-sense resistor for channel 1, input voltage range -0.3V to 3V, compared against REF1 to regulate peak current. |+| 13 | OUT 4 | output | TTL-compatible logic output for channel 4 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage. |+| 14 | OUT 3 | output | TTL-compatible logic output for channel 3 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage. |+| 15 | OUT 2 | output | TTL-compatible logic output for channel 2 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage. |+| 16 | OUT 1 | output | TTL-compatible logic output for channel 1 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage. |+| 17 | VSENSE 2 | input | Comparator input sensing the voltage across the external current-sense resistor for channel 2, input voltage range -0.3V to 3V, compared against REF2 to regulate peak current. |+| 18 | REF 1 | input | Reference voltage input setting the peak-current threshold (Vref) for the channel-1 comparator; Ipeak = Vref/Rsense. |+| 19 | REF 2 | input | Reference voltage input setting the peak-current threshold (Vref) for the channel-2 comparator; Ipeak = Vref/Rsense. |+| 20 | VCC | power_in | Positive supply voltage pin, operating range 4.5V to 7V, absolute maximum 10V, quiescent supply current up to 25mA at VCC=7V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-20-300mil |+| Category | Motor Driver ICs |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `L6506D013TR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `l6506d013tr-etched.step` / `l6506d013tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6506d013tr.step` / `l6506d013tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884623447232512) (8 pp, sha256 `12dcd81ed04c553c`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-5` (text+vision), consensus `claude-opus-4-8` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l6506d013tr-datasheet.pdf)
page.jsonadded+215
@@ -0,0 +1,215 @@+{+  "slug": "l6506d013tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Stepper Motor Driver, SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "l6506d013tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "l6506d013tr.kicad_sym",+    "l6506d013tr.kicad_mod",+    "l6506d013tr.glb",+    "l6506d013tr.step",+    "l6506d013tr.lbr",+    "docs/hero.png",+    "docs/l6506d013tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "L6506D013TR",+    "manufacturer": "STMicroelectronics",+    "package": "SOIC-20-300mil",+    "pin_count": 20,+    "category": "Motor Driver ICs",+    "subcategory": "Stepper Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884623447232512",+    "parts": {+      "symbol": "l6506d013tr.kicad_sym",+      "footprint": "l6506d013tr.kicad_mod",+      "model_3d": "l6506d013tr-etched.glb",+      "model_3d_plain": "l6506d013tr.glb",+      "model_3d_step": "l6506d013tr-etched.step",+      "model_3d_step_plain": "l6506d013tr.step",+      "lbr": "l6506d013tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C238872"+    },+    "pins": [+      {+        "number": "1",+        "name": "R/C",+        "type": "passive",+        "description": "External R-C timing network input that sets the on-chip oscillator frequency (f = 1/(0.69·R·C) for R>10kΩ)."+      },+      {+        "number": "2",+        "name": "OSC.",+        "type": "passive",+        "description": "Oscillator node with internal discharge resistor of 1kΩ ±30% switching between the lower (0.33·VCC) and upper (0.66·VCC) thresholds; sets oscillator frequency range 5 to 70kHz."+      },+      {+        "number": "3",+        "name": "SYNC",+        "type": "bidirectional",+        "description": "Synchronization pin; connecting the sync pins of multiple L6506 devices to the master's oscillator output allows the master to set the operating frequency of all chips."+      },+      {+        "number": "4",+        "name": "POWER ENABLE",+        "type": "input",+        "description": "TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) that enables the four output drivers."+      },+      {+        "number": "5",+        "name": "IN 1",+        "type": "input",+        "description": "TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 1 (OUT1) through the internal AND gate/flip-flop."+      },+      {+        "number": "6",+        "name": "IN 2",+        "type": "input",+        "description": "TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 2 (OUT2) through the internal AND gate/flip-flop."+      },+      {+        "number": "7",+        "name": "IN 3",+        "type": "input",+        "description": "TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 3 (OUT3) through the internal AND gate/flip-flop."+      },+      {+        "number": "8",+        "name": "IN 4",+        "type": "input",+        "description": "TTL-compatible logic input (VIH ≥2V, VIL ≤0.8V) controlling output channel 4 (OUT4) through the internal AND gate/flip-flop."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference pin for the device."+      },+      {+        "number": "10",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not internally connected pin (package pin present on SO20 but unused by the die)."+      },+      {+        "number": "11",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not internally connected pin (package pin present on SO20 but unused by the die)."+      },+      {+        "number": "12",+        "name": "VSENSE 1",+        "type": "input",+        "description": "Comparator input sensing the voltage across the external current-sense resistor for channel 1, input voltage range -0.3V to 3V, compared against REF1 to regulate peak current."+      },+      {+        "number": "13",+        "name": "OUT 4",+        "type": "output",+        "description": "TTL-compatible logic output for channel 4 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage."+      },+      {+        "number": "14",+        "name": "OUT 3",+        "type": "output",+        "description": "TTL-compatible logic output for channel 3 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage."+      },+      {+        "number": "15",+        "name": "OUT 2",+        "type": "output",+        "description": "TTL-compatible logic output for channel 2 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage."+      },+      {+        "number": "16",+        "name": "OUT 1",+        "type": "output",+        "description": "TTL-compatible logic output for channel 1 (VOH 2 to 3.5V at IOH=400µA, VOL 0.25 to 0.4V at IOL=4mA, source current 2.75mA typ.) driving the external power stage."+      },+      {+        "number": "17",+        "name": "VSENSE 2",+        "type": "input",+        "description": "Comparator input sensing the voltage across the external current-sense resistor for channel 2, input voltage range -0.3V to 3V, compared against REF2 to regulate peak current."+      },+      {+        "number": "18",+        "name": "REF 1",+        "type": "input",+        "description": "Reference voltage input setting the peak-current threshold (Vref) for the channel-1 comparator; Ipeak = Vref/Rsense."+      },+      {+        "number": "19",+        "name": "REF 2",+        "type": "input",+        "description": "Reference voltage input setting the peak-current threshold (Vref) for the channel-2 comparator; Ipeak = Vref/Rsense."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage pin, operating range 4.5V to 7V, absolute maximum 10V, quiescent supply current up to 25mA at VCC=7V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-sonnet-5",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-4-8",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 8,+        "cost_usd": 0.4078,+        "at": "2026-09-23T19:45:26"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884623447232512",+        "pages": 8,+        "sha256": "12dcd81ed04c553c",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file