component
L6395D
Public Made by Adomby adom
STMicroelectronics Gate Drivers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# L6395D++**STMicroelectronics** · Gate Drivers · SO-8++L6395D from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LIN | input | Low-side driver logic input (active high), with CMOS/TTL-compatible thresholds of Vil 0.8 to 1.1 V and Vih 1.9 to 2.25 V and hysteresis, usable down to 3.3 V logic. |+| 2 | HIN | input | High-side driver logic input (active high), with CMOS/TTL-compatible thresholds of Vil 0.8 to 1.1 V and Vih 1.9 to 2.25 V and hysteresis, usable down to 3.3 V logic. |+| 3 | VCC | power_in | Lower section supply voltage, recommended 10 V to 20 V, with absolute maximum rating of -0.3 V to 21 V. |+| 4 | GND | power_in | Ground reference for the device. |+| 5 | LVG | output | Low-side driver output; the circuit guarantees less than 1 V on LVG at Isink = 10 mA with VCC > 3 V, so an external gate-source bleeder resistor is not needed, with driver source/sink short-circuit currents of 290 mA and 430 mA (tp < 10 µs). |+| 6 | OUT | power_in | High-side (floating) common voltage, with recommended output voltage range of -11 V to 580 V and allowed slew rate of 50 V/ns. |+| 7 | HVG | output | High-side driver output; the circuit guarantees less than 1 V on HVG at Isink = 10 mA with VCC > 3 V, so an external gate-source bleeder resistor is not needed. |+| 8 | BOOT | power_in | Bootstrapped supply voltage for the high-side driver, with recommended floating supply voltage (VBOOT - VOUT) of 9.4 V to 20 V and absolute maximum VBOOT of 620 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SO-8 |+| Category | Motor Driver ICs |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `L6395D`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)+- 3D model files: `l6395d-etched.step` / `l6395d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6395d.step` / `l6395d.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589035417022291968) (16 pp, sha256 `8730b3bddd4951d2`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l6395d-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "l6395d",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Gate Drivers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "l6395d",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "l6395d.kicad_sym",+ "l6395d.kicad_mod",+ "l6395d.glb",+ "l6395d.step",+ "l6395d.lbr",+ "docs/hero.png",+ "docs/l6395d-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "l6395d-hero.glb",+ "l6395d-hero.overlay.json"+ ],+ "component": {+ "mpn": "L6395D",+ "manufacturer": "STMicroelectronics",+ "package": "SO-8",+ "pin_count": 8,+ "category": "Motor Driver ICs",+ "subcategory": "Gate Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589035417022291968",+ "parts": {+ "symbol": "l6395d.kicad_sym",+ "footprint": "l6395d.kicad_mod",+ "model_3d": "l6395d-hero.glb",+ "model_3d_plain": "l6395d.glb",+ "model_3d_step": "l6395d-etched.step",+ "model_3d_step_plain": "l6395d.step",+ "lbr": "l6395d.lbr"+ },+ "distributor_links": {+ "lcsc": "C1549486",+ "digikey": "497-14335-5-ND",+ "mouser": "511-L6395D"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T19:57:37Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-14335-5-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-L6395D",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "LIN",+ "type": "input",+ "description": "Low-side driver logic input (active high), with CMOS/TTL-compatible thresholds of Vil 0.8 to 1.1 V and Vih 1.9 to 2.25 V and hysteresis, usable down to 3.3 V logic."+ },+ {+ "number": "2",+ "name": "HIN",+ "type": "input",+ "description": "High-side driver logic input (active high), with CMOS/TTL-compatible thresholds of Vil 0.8 to 1.1 V and Vih 1.9 to 2.25 V and hysteresis, usable down to 3.3 V logic."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Lower section supply voltage, recommended 10 V to 20 V, with absolute maximum rating of -0.3 V to 21 V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "5",+ "name": "LVG",+ "type": "output",+ "description": "Low-side driver output; the circuit guarantees less than 1 V on LVG at Isink = 10 mA with VCC > 3 V, so an external gate-source bleeder resistor is not needed, with driver source/sink short-circuit currents of 290 mA and 430 mA (tp < 10 µs)."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "power_in",+ "description": "High-side (floating) common voltage, with recommended output voltage range of -11 V to 580 V and allowed slew rate of 50 V/ns."+ },+ {+ "number": "7",+ "name": "HVG",+ "type": "output",+ "description": "High-side driver output; the circuit guarantees less than 1 V on HVG at Isink = 10 mA with VCC > 3 V, so an external gate-source bleeder resistor is not needed."+ },+ {+ "number": "8",+ "name": "BOOT",+ "type": "power_in",+ "description": "Bootstrapped supply voltage for the high-side driver, with recommended floating supply voltage (VBOOT - VOUT) of 9.4 V to 20 V and absolute maximum VBOOT of 620 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet classifies OUT as type P (high-side floating common voltage). Mapped to KiCad power_in; The datasheet gives only SO-8 for this MPN (order codes L6395D tube and L6395DTR tape and reel), so "+ ],+ "pages_sent": 16,+ "cost_usd": 0.0516,+ "at": "2026-10-08T19:57:20"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589035417022291968",+ "pages": 16,+ "sha256": "8730b3bddd4951d2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "l6395d.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "l6395d-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c9a15a7ad598ef7f62864a3a2ee6488bfc57f7a7b6b6b58572207924a0648701",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}