← Commit history

Initial commit: component/l6225dtr

Ray ·428e809e65 ·
2 files changed +269
README.mdadded+56
@@ -0,0 +1,56 @@+# L6225DTR++**STMicroelectronics** · Stepper Motor Driver · SOIC-20-300mil++L6225DTR from STMicroelectronics, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN1A | input | Bridge A Logic Input 1 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical. |+| 2 | IN2A | input | Bridge A Logic Input 2 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical. |+| 3 | SENSEA | power_in | Bridge A current sense source pin; must connect to power ground directly or through a sensing resistor; voltage range -1 to +1V DC or -6 to +6V pulsed. |+| 4 | OUT1A | power_out | Bridge A Output 1; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A. |+| 5 | GND | power_in | Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20. |+| 6 | GND | power_in | Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20. |+| 7 | OUT1B | power_out | Bridge B Output 1; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A. |+| 8 | SENSEB | power_in | Bridge B current sense source pin; must connect to power ground directly or through a sensing resistor; voltage range -1 to +1V DC or -6 to +6V pulsed. |+| 9 | IN1B | input | Bridge B Logic Input 1 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical. |+| 10 | IN2B | input | Bridge B Logic Input 2 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical. |+| 11 | ENB | input | Bridge B Enable input; LOW logic level disables all Bridge B MOSFETs; connected to open-drain overcurrent and thermal protection transistor collector with 4mA pull-down; connect to +5V through resistor if unused. |+| 12 | VBOOT | power_in | Bootstrap voltage supply for driving upper PowerMOSFETs of both bridges; peak voltage VS + 10V; 600kHz typical oscillator output with 10V amplitude. |+| 13 | OUT2B | power_out | Bridge B Output 2; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A. |+| 14 | VSB | power_in | Bridge B power supply voltage; must connect to supply voltage together with VSA pin; operating range 8 to 52V; peak pulsed current 3.55A, RMS current 1.4A. |+| 15 | GND | power_in | Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20. |+| 16 | GND | power_in | Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20. |+| 17 | VSA | power_in | Bridge A power supply voltage; must connect to supply voltage together with VSB pin; operating range 8 to 52V; peak pulsed current 3.55A, RMS current 1.4A. |+| 18 | OUT2A | power_out | Bridge A Output 2; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A. |+| 19 | VCP | output | Charge Pump Oscillator Output; provides 600kHz typical square wave with 10V amplitude for external bootstrap charge pump circuit. |+| 20 | ENA | input | Bridge A Enable input; LOW logic level disables all Bridge A MOSFETs; connected to open-drain overcurrent and thermal protection transistor collector with 4mA pull-down; connect to +5V through resistor if unused. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-20-300mil |+| Category | Motor Driver ICs |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `L6225DTR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `l6225dtr-etched.step` / `l6225dtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6225dtr.step` / `l6225dtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908547127697408) (20 pp, sha256 `592efbdb82d149b7`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l6225dtr-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "l6225dtr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Stepper Motor Driver, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "l6225dtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "l6225dtr.kicad_sym",+    "l6225dtr.kicad_mod",+    "l6225dtr.glb",+    "l6225dtr.step",+    "l6225dtr.lbr",+    "docs/hero.png",+    "docs/l6225dtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "L6225DTR",+    "manufacturer": "STMicroelectronics",+    "package": "SOIC-20-300mil",+    "pin_count": 20,+    "category": "Motor Driver ICs",+    "subcategory": "Stepper Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908547127697408",+    "parts": {+      "symbol": "l6225dtr.kicad_sym",+      "footprint": "l6225dtr.kicad_mod",+      "model_3d": "l6225dtr-etched.glb",+      "model_3d_plain": "l6225dtr.glb",+      "model_3d_step": "l6225dtr-etched.step",+      "model_3d_step_plain": "l6225dtr.step",+      "lbr": "l6225dtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C962628"+    },+    "pins": [+      {+        "number": "1",+        "name": "IN1A",+        "type": "input",+        "description": "Bridge A Logic Input 1 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical."+      },+      {+        "number": "2",+        "name": "IN2A",+        "type": "input",+        "description": "Bridge A Logic Input 2 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical."+      },+      {+        "number": "3",+        "name": "SENSEA",+        "type": "power_in",+        "description": "Bridge A current sense source pin; must connect to power ground directly or through a sensing resistor; voltage range -1 to +1V DC or -6 to +6V pulsed."+      },+      {+        "number": "4",+        "name": "OUT1A",+        "type": "power_out",+        "description": "Bridge A Output 1; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20."+      },+      {+        "number": "7",+        "name": "OUT1B",+        "type": "power_out",+        "description": "Bridge B Output 1; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A."+      },+      {+        "number": "8",+        "name": "SENSEB",+        "type": "power_in",+        "description": "Bridge B current sense source pin; must connect to power ground directly or through a sensing resistor; voltage range -1 to +1V DC or -6 to +6V pulsed."+      },+      {+        "number": "9",+        "name": "IN1B",+        "type": "input",+        "description": "Bridge B Logic Input 1 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical."+      },+      {+        "number": "10",+        "name": "IN2B",+        "type": "input",+        "description": "Bridge B Logic Input 2 with TTL/CMOS compatibility; voltage range -0.3 to +7V, Vth(ON) = 1.8V typical, Vth(OFF) = 1.3V typical."+      },+      {+        "number": "11",+        "name": "ENB",+        "type": "input",+        "description": "Bridge B Enable input; LOW logic level disables all Bridge B MOSFETs; connected to open-drain overcurrent and thermal protection transistor collector with 4mA pull-down; connect to +5V through resistor if unused."+      },+      {+        "number": "12",+        "name": "VBOOT",+        "type": "power_in",+        "description": "Bootstrap voltage supply for driving upper PowerMOSFETs of both bridges; peak voltage VS + 10V; 600kHz typical oscillator output with 10V amplitude."+      },+      {+        "number": "13",+        "name": "OUT2B",+        "type": "power_out",+        "description": "Bridge B Output 2; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A."+      },+      {+        "number": "14",+        "name": "VSB",+        "type": "power_in",+        "description": "Bridge B power supply voltage; must connect to supply voltage together with VSA pin; operating range 8 to 52V; peak pulsed current 3.55A, RMS current 1.4A."+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20."+      },+      {+        "number": "16",+        "name": "GND",+        "type": "power_in",+        "description": "Signal Ground terminal; provides heat dissipation path toward PCB in SO and PowerDIP packages; internally connected to pins 1, 10, 11, and 20."+      },+      {+        "number": "17",+        "name": "VSA",+        "type": "power_in",+        "description": "Bridge A power supply voltage; must connect to supply voltage together with VSB pin; operating range 8 to 52V; peak pulsed current 3.55A, RMS current 1.4A."+      },+      {+        "number": "18",+        "name": "OUT2A",+        "type": "power_out",+        "description": "Bridge A Output 2; power output with integrated DMOS transistor (RDS(ON) = 0.73Ω typical @ 25°C) and freewheeling diode; maximum peak current 2.8A."+      },+      {+        "number": "19",+        "name": "VCP",+        "type": "output",+        "description": "Charge Pump Oscillator Output; provides 600kHz typical square wave with 10V amplitude for external bootstrap charge pump circuit."+      },+      {+        "number": "20",+        "name": "ENA",+        "type": "input",+        "description": "Bridge A Enable input; LOW logic level disables all Bridge A MOSFETs; connected to open-drain overcurrent and thermal protection transistor collector with 4mA pull-down; connect to +5V through resistor if unused."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 20,+        "cost_usd": 0.2676,+        "at": "2026-09-24T01:49:57"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908547127697408",+        "pages": 20,+        "sha256": "592efbdb82d149b7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file