← Commit history
l4981ad013tr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+146−1
page.json+146−1@@ -33,5 +33,150 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "L4981AD013TR",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-20-300mil",+ "pin_count": 20,+ "category": "AC-DC Controllers and Regulators",+ "parts": {+ "symbol": "l4981ad013tr.kicad_sym",+ "footprint": "l4981ad013tr.kicad_mod",+ "model_3d": "l4981ad013tr-etched.glb",+ "model_3d_plain": "l4981ad013tr.glb",+ "model_3d_step": "l4981ad013tr-etched.step",+ "model_3d_step_plain": "l4981ad013tr.step",+ "lbr": "l4981ad013tr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "P-GND",+ "type": "power_in",+ "description": "Power ground return for the high-current gate-driver output stage. Should be tied to the source of the boost MOSFET and, via a low-impedance star point, back to signal ground (pin 10)."+ },+ {+ "number": "2",+ "name": "IPK",+ "type": "input",+ "description": "Peak current limit sense input. On L4981A a single resistor between pin 2 and the current-sense resistor sets the peak-current threshold; a second resistor to VREF (pin 11) can be added for improved precision. Absolute max -0.3 to 5.5 V (-2 V for t<=1us)."+ },+ {+ "number": "3",+ "name": "OVP",+ "type": "input",+ "description": "Overvoltage protection input. An external resistor divider from the boost output is compared against an internal 5.1 V (typ) reference to clamp the peak output voltage. Absolute max -0.3 to 9 V."+ },+ {+ "number": "4",+ "name": "IAC",+ "type": "input",+ "description": "AC current input. A current proportional to the rectified mains voltage (typically injected through a high-value resistor from the rectified line) is fed into the internal multiplier to generate the current reference. Absolute max input current 5 mA."+ },+ {+ "number": "5",+ "name": "CA-OUT",+ "type": "output",+ "description": "Current amplifier output. An external RC compensation network from this pin to ISENSE (pin 9) sets the current-loop gain and bandwidth. Sink/source ~=20 mA, output range approx. -0.3 to 8.5 V."+ },+ {+ "number": "6",+ "name": "LFF",+ "type": "input",+ "description": "Load feed-forward input. Modulates the multiplier output current in proportion to load for faster transient response; best control between 1.5 V and 5.3 V. If unused, tie to VREF (pin 11). Absolute max -0.3 to 9 V."+ },+ {+ "number": "7",+ "name": "VRMS",+ "type": "input",+ "description": "RMS line-voltage feed-forward input. An external RC low-pass filter from the rectified line produces a DC voltage proportional to line RMS, compensating for input line variations. Recommended operating range 1.5 V to 5.5 V; if unused, tie to VREF (pin 11). Absolute max -0.3 to 9 V."+ },+ {+ "number": "8",+ "name": "MULT-OUT",+ "type": "output",+ "description": "Multiplier output / current amplifier non-inverting input. High-impedance node; must not be pulled below -0.5 V. Absolute max -0.5 to 7 V."+ },+ {+ "number": "9",+ "name": "ISENSE",+ "type": "input",+ "description": "Current amplifier inverting input, connected to the boost inductor current-sense resistor through an input resistor. High-impedance node; do not allow the pin to fall below -0.5 V. Absolute max -0.5 to 7 V."+ },+ {+ "number": "10",+ "name": "S-GND",+ "type": "power_in",+ "description": "Signal (analog) ground. Return for the reference, error/current amplifiers, oscillator, and protection comparators. Kelvin-connect to P-GND (pin 1) at a single star point."+ },+ {+ "number": "11",+ "name": "VREF",+ "type": "power_out",+ "description": "Buffered internal voltage reference output, 5.1 V typ, +/-2% (4.97 to 5.23 V over -25 degC to 85 degC). Internally current-limited, can source up to 10 mA to bias external circuitry (LFF, VRMS, IPK divider, etc.)."+ },+ {+ "number": "12",+ "name": "SS",+ "type": "output",+ "description": "Soft-start pin. An external capacitor to ground is charged by an internal 100 uA (typ) current source, ramping the reference to the error amplifier and setting the soft-start time. Internally discharged during UVLO or overvoltage. Absolute max -0.3 to 9 V."+ },+ {+ "number": "13",+ "name": "VA-OUT",+ "type": "output",+ "description": "Voltage-loop error amplifier output. An external RC network sets the voltage-loop compensation. Output swing typically 0.4 V (low) to ~=6.5 V (high); source/sink capability 2-20 mA. Absolute max -0.3 to 8.5 V."+ },+ {+ "number": "14",+ "name": "VFEED",+ "type": "input",+ "description": "Voltage error amplifier inverting input, driven by a resistive divider from the boost output to set the regulated DC bus voltage. Internally referenced to VREF (5.1 V). Absolute max -0.3 to 9 V."+ },+ {+ "number": "15",+ "name": "P-UVLO",+ "type": "input",+ "description": "Programmable under-voltage lockout threshold input. A resistor divider from VCC (or the bootstrap supply) programs the turn-on threshold with hysteresis. Absolute max -0.3 to 7 V."+ },+ {+ "number": "16",+ "name": "SYNC",+ "type": "bidirectional",+ "description": "L4981A synchronization I/O (CMOS logic compatible). As SYNC-in, a rectangular clock applied at this pin synchronizes the internal oscillator (VIH >= 3.5 V, VIL <= 0.9 V, pulse width >= 800 ns). As SYNC-out, the internal oscillator emits a ~=0.3-0.8 us wide clock pulse to synchronize other devices. Absolute max -0.3 to 7 V."+ },+ {+ "number": "17",+ "name": "ROSC",+ "type": "passive",+ "description": "Oscillator timing resistor. An external resistor to ground (typ 24 kOhm) sets the constant charging current for COSC. Absolute max -0.3 to 3 V."+ },+ {+ "number": "18",+ "name": "COSC",+ "type": "passive",+ "description": "Oscillator timing capacitor. An external capacitor to ground (typ 1 nF with ROSC = 24 kOhm gives ~=100 kHz) sets the switching frequency. Peak-charge current ~=0.55 mA, discharge ~=11.5 mA. Absolute max -0.3 to 7 V, sink 15 mA."+ },+ {+ "number": "19",+ "name": "VCC",+ "type": "power_in",+ "description": "Chip supply input (self-limited to <= 50 mA). Typical operating range up to 19.5 V; the device features low start-up current (0.3 mA typ) so it can be bootstrapped from the rectified mains through a resistor and held up by an auxiliary winding."+ },+ {+ "number": "20",+ "name": "GDRV",+ "type": "output",+ "description": "Gate driver output. Bipolar-plus-DMOS totem-pole stage delivering >1 A source and up to 2 A sink peak (t = 1 us) to drive the boost power MOSFET or IGBT. Peak gate-drive voltage -1 V min (t = 0.1 us)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}