← Commit history
Publish 0.1.1
4 files changed
+463−485
README.md+1−1@@ -94,7 +94,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: - **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/l293b.pdf) (12 pp, sha256 `e01fb4030857fd6d`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/l293b-datasheet.pdf)
l293b-hero.overlay.json+443−438@@ -1,441 +1,446 @@ {- "spec": "adom-hero 1.4",- "mpn": "L293B",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 16,- "span_mm": 19.38,- "dash_mm": 0.45,- "gap_mm": 0.27,- "pad_stroke_mm": 0.09- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 6,- "pin1": {- "source": "added dot (AI)",- "pad": "1",- "center_mm": [- 0.0,- -1.35- ],- "r_mm": 0.35- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 16,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 1.55,- "orientation_flipped": false,- "contacts_bbox_mm": [- -0.564,- 8.184,- -18.03,- 0.25- ],- "pads_bbox_mm": [- -0.8,- 8.42,- -18.58,- 0.8+ "spec": "adom-hero 1.4",+ "mpn": "L293B",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 16,+ "span_mm": 19.38,+ "dash_mm": 0.45,+ "gap_mm": 0.27,+ "pad_stroke_mm": 0.09+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 6,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ 0.0,+ -1.35 ],- "seating_z_mm": -3.5- },- "sources": {- "glb": "l293b-etched.glb",- "glb_sha256": "9d904b3da6c5aefbff575682a1115abd51a3ca13e72bc30524744acff05b37d8",- "footprint": "l293b.kicad_mod",- "footprint_sha256": "d9f5f5a3dbebef059800781d37575e4120e5ae5e7fd96001eda365f65de94485",- "pins": "page.json component.pins",- "pins_sha256": "f7242ca960846fc7eea908aa9669a98f68acfd4db3f2161122a5c62c236ab6e2"- },- "generator": "adom-wiki 1.8.22 (component_hero)",- "labels": [- {- "pad": "1",- "text": "CHIP ENABLE 1",- "x": -0.95,- "y": 0.0,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "INPUT 1",- "x": -0.95,- "y": 2.54,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "OUTPUT 1",- "x": -0.95,- "y": 5.08,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "GND",- "x": -0.95,- "y": 7.62,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "GND",- "x": -0.95,- "y": 10.16,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "OUTPUT 2",- "x": -0.95,- "y": 12.7,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "7",- "text": "INPUT 2",- "x": -0.95,- "y": 15.24,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "8",- "text": "Vs",- "x": -0.95,- "y": 17.78,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "9",- "text": "CHIP ENABLE 2",- "x": 8.57,- "y": 17.78,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "10",- "text": "INPUT 3",- "x": 8.57,- "y": 15.24,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "11",- "text": "OUTPUT 3",- "x": 8.57,- "y": 12.7,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "12",- "text": "GND",- "x": 8.57,- "y": 10.16,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "13",- "text": "GND",- "x": 8.57,- "y": 7.62,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "14",- "text": "OUTPUT 4",- "x": 8.57,- "y": 5.08,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "15",- "text": "INPUT 4",- "x": 8.57,- "y": 2.54,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "16",- "text": "Vss",- "x": 8.57,- "y": 0.0,- "align": "left",- "vertical": false,- "h": 0.6- }+ "r_mm": 0.35+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 16,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": true,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 1.55,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.564,+ 8.184,+ -18.03,+ 0.25 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- 0.0,- 0.0- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "2",- "shape": "circle",- "center_mm": [- 0.0,- 2.54- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "3",- "shape": "circle",- "center_mm": [- 0.0,- 5.08- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "4",- "shape": "circle",- "center_mm": [- 0.0,- 7.62- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "5",- "shape": "circle",- "center_mm": [- 0.0,- 10.16- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "6",- "shape": "circle",- "center_mm": [- 0.0,- 12.7- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "7",- "shape": "circle",- "center_mm": [- 0.0,- 15.24- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "8",- "shape": "circle",- "center_mm": [- 0.0,- 17.78- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "9",- "shape": "circle",- "center_mm": [- 7.62,- 17.78- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "10",- "shape": "circle",- "center_mm": [- 7.62,- 15.24- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "11",- "shape": "circle",- "center_mm": [- 7.62,- 12.7- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "12",- "shape": "circle",- "center_mm": [- 7.62,- 10.16- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "13",- "shape": "circle",- "center_mm": [- 7.62,- 7.62- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "14",- "shape": "circle",- "center_mm": [- 7.62,- 5.08- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "15",- "shape": "circle",- "center_mm": [- 7.62,- 2.54- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "16",- "shape": "circle",- "center_mm": [- 7.62,- 0.0- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- }- ]-}+ "pads_bbox_mm": [+ -0.8,+ 8.42,+ -18.58,+ 0.8+ ],+ "seating_z_mm": -3.5+ },+ "sources": {+ "glb": "l293b-etched.glb",+ "glb_sha256": "9d904b3da6c5aefbff575682a1115abd51a3ca13e72bc30524744acff05b37d8",+ "footprint": "l293b.kicad_mod",+ "footprint_sha256": "d9f5f5a3dbebef059800781d37575e4120e5ae5e7fd96001eda365f65de94485",+ "pins": "page.json component.pins",+ "pins_sha256": "f7242ca960846fc7eea908aa9669a98f68acfd4db3f2161122a5c62c236ab6e2"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "CHIP ENABLE 1",+ "x": -0.95,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "INPUT 1",+ "x": -0.95,+ "y": 2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "OUTPUT 1",+ "x": -0.95,+ "y": 5.08,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -0.95,+ "y": 7.62,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "GND",+ "x": -0.95,+ "y": 10.16,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "OUTPUT 2",+ "x": -0.95,+ "y": 12.7,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "INPUT 2",+ "x": -0.95,+ "y": 15.24,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "Vs",+ "x": -0.95,+ "y": 17.78,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "CHIP ENABLE 2",+ "x": 8.57,+ "y": 17.78,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "INPUT 3",+ "x": 8.57,+ "y": 15.24,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "OUTPUT 3",+ "x": 8.57,+ "y": 12.7,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "GND",+ "x": 8.57,+ "y": 10.16,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "GND",+ "x": 8.57,+ "y": 7.62,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "OUTPUT 4",+ "x": 8.57,+ "y": 5.08,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "15",+ "text": "INPUT 4",+ "x": 8.57,+ "y": 2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "16",+ "text": "Vss",+ "x": 8.57,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 2.54+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 5.08+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 7.62+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 10.16+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 12.7+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 15.24+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 17.78+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 17.78+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 15.24+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 12.7+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 10.16+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 7.62+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 5.08+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 2.54+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 0.0+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+5−20@@ -1,8 +1,8 @@ { "slug": "l293b",- "version": "0.1.0",+ "version": "0.1.1", "type": "component",- "description": "STMicroelectronics Motor Driver ICs, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "description": "STMicroelectronics Motor Driver ICs, DIP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [ "component", "power management ics",@@ -54,7 +54,7 @@ "mouser": "511-L293B" }, "distributor_check": {- "checked_at": "2026-11-12T03:52:02Z",+ "checked_at": "2026-11-12T05:01:44Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "497-L293B-ND",@@ -164,22 +164,7 @@ } ], "provenance": {- "extractor": "extract_pins 0.3",- "factory_chain": {- "factory": "2.0.0",- "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",- "primary_mode": "text+vision",- "consensus_model": "claude-opus-5-5",- "consensus": "agreed",- "guards": "pin_guards 0.1: passed",- "guard_notes": [- "vision extraction: provenance cannot be text-verified; needs consensus"- ],- "pages_sent": 12,- "cost_usd": 0.267,- "at": "2026-11-12T03:51:54"- },+ "extractor": "ds2sf", "datasheet": { "url": "https://www.st.com/resource/en/datasheet/l293b.pdf", "pages": 12,@@ -233,7 +218,7 @@ "zmin_mm": -3.5, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "30deb0e63cf9929fc63e0db20f8935bc58848d9cad658cba7b32588474213fc1",+ "sha256": "af7733505a0fd4843d5d7c23956de95e6bee3845141d7a113981b61fdfbb9db9", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+14−26@@ -4,7 +4,7 @@ "slug": "l293b", "title": "L293B", "brief": "STMicroelectronics Motor Driver ICs, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "511-L293B" }, "distributor_check": {- "checked_at": "2026-11-12T03:52:02Z",+ "checked_at": "2026-11-12T05:01:44Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "497-L293B-ND",@@ -146,22 +146,7 @@ } ], "provenance": {- "extractor": "extract_pins 0.3",- "factory_chain": {- "factory": "2.0.0",- "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",- "primary_mode": "text+vision",- "consensus_model": "claude-opus-5-5",- "consensus": "agreed",- "guards": "pin_guards 0.1: passed",- "guard_notes": [- "vision extraction: provenance cannot be text-verified; needs consensus"- ],- "pages_sent": 12,- "cost_usd": 0.267,- "at": "2026-11-12T03:51:54"- },+ "extractor": "ds2sf", "datasheet": { "url": "https://www.st.com/resource/en/datasheet/l293b.pdf", "pages": 12,@@ -190,11 +175,11 @@ "seat": "body on z = 0, through-hole leads below", "extents_mm": [ 8.75,- 20.0,+ 20, 8.6 ], "zmin_mm": -3.5,- "centre_offset_mm": 0.0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "6b40f91ffa6e3714682c06256667a87ed313ad70b287f52c774d421830d7796e", "checked": "2026-11-12",@@ -209,13 +194,13 @@ "seat": "body on z = 0, through-hole leads below", "extents_mm": [ 8.75,- 20.0,+ 20, 8.6 ], "zmin_mm": -3.5,- "centre_offset_mm": 0.0,+ "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "30deb0e63cf9929fc63e0db20f8935bc58848d9cad658cba7b32588474213fc1",+ "sha256": "af7733505a0fd4843d5d7c23956de95e6bee3845141d7a113981b61fdfbb9db9", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -224,7 +209,7 @@ "package_code": "DIP16", "source_page": 10, "D": {- "nom_mm": 20.0,+ "nom_mm": 20, "range_mm": [ null, null@@ -719,5 +704,8 @@ "l293b-hero.glb", "l293b-hero.overlay.json", "l293b-etched.glb"- ]-}+ ],+ "description": "STMicroelectronics Motor Driver ICs, DIP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+ "visibility": "private",+ "org": "adom"+}