← Commit history
page.json+11−8@@ -32,13 +32,13 @@ "number": "1", "name": "OSCI", "type": "input",- "description": "Single-ended oscillator input. Connect an external oscillator resistor from this pin to VCC to set the encoding bit-width / working frequency (see resistor-vs-code-width table, e.g. 47 k\u03a9 \u2248 287 \u00b5s @ 3 V up to 560 k\u03a9 \u2248 2.83 ms @ 12 V)."+ "description": "Single-ended oscillator input. Connect an external oscillator resistor from this pin to VCC to set the encoding bit-width / working frequency (see resistor-vs-code-width table, e.g. 47 kΩ ≈ 287 µs @ 3 V up to 560 kΩ ≈ 2.83 ms @ 12 V)." }, { "number": "2", "name": "VDD", "type": "power_in",- "description": "Positive supply. Operating range 2.0 V to 12 V (absolute max 12 V, abs-min -0.3 V). Static current typ 0.01 \u00b5A (< 0.1 \u00b5A) with all keys open; operating current typ 0.2 mA (max 1.0 mA) with any Kx high."+ "description": "Positive supply. Operating range 2.0 V to 12 V (absolute max 12 V, abs-min -0.3 V). Static current typ 0.01 µA (< 0.1 µA) with all keys open; operating current typ 0.2 mA (max 1.0 mA) with any Kx high." }, { "number": "3",@@ -50,31 +50,31 @@ "number": "4", "name": "DAT", "type": "output",- "description": "Serial encoded data output. Frame = sync + 20-bit address (C0..C19) + 4 data bits (D0..D3). Drive capability IOH \u2248 20 mA typ @ VCC=12 V (VOH=5 V), 15 mA typ @ VCC=9 V, 1.5 mA typ @ VCC=3 V. Idle low; asserts only while a key is pressed, so it can directly drive an indicator LED / NPN RF-modulator stage."+ "description": "Serial encoded data output. Frame = sync + 20-bit address (C0..C19) + 4 data bits (D0..D3). Drive capability IOH ≈ 20 mA typ @ VCC=12 V (VOH=5 V), 15 mA typ @ VCC=9 V, 1.5 mA typ @ VCC=3 V. Idle low; asserts only while a key is pressed, so it can directly drive an indicator LED / NPN RF-modulator stage." }, { "number": "5", "name": "K0", "type": "input",- "description": "Key input 0. Active-high; contains an internal 10 k\u03a9 pull-down to GND. Drive high (through a key from VCC) to encode bit D0 in the transmitted frame."+ "description": "Key input 0. Active-high; contains an internal 10 kΩ pull-down to GND. Drive high (through a key from VCC) to encode bit D0 in the transmitted frame." }, { "number": "6", "name": "K1", "type": "input",- "description": "Key input 1. Active-high; contains an internal 10 k\u03a9 pull-down to GND. Drive high to encode bit D1."+ "description": "Key input 1. Active-high; contains an internal 10 kΩ pull-down to GND. Drive high to encode bit D1." }, { "number": "7", "name": "K2", "type": "input",- "description": "Key input 2. Active-high; contains an internal 10 k\u03a9 pull-down to GND. Drive high to encode bit D2."+ "description": "Key input 2. Active-high; contains an internal 10 kΩ pull-down to GND. Drive high to encode bit D2." }, { "number": "8", "name": "K3", "type": "input",- "description": "Key input 3. Active-high; contains an internal 10 k\u03a9 pull-down to GND. Drive high to encode bit D3. Any Kx held for 15 s puts the chip into low-power shutdown until all keys are released."+ "description": "Key input 3. Active-high; contains an internal 10 kΩ pull-down to GND. Drive high to encode bit D3. Any Kx held for 15 s puts the chip into low-power shutdown until all keys are released." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/l1527-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }