← Commit history

kx022-1020: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·a710c689a2 · ·parent c33807e
1 file changed +98−1
page.json+98−1
@@ -33,5 +33,102 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "KX022-1020",+    "manufacturer": "ROHM",+    "package": "LGA-12(2x2)",+    "pin_count": 12,+    "category": "Attitude Sensor/Gyroscope",+    "parts": {+      "symbol": "kx022-1020.kicad_sym",+      "footprint": "kx022-1020.kicad_mod",+      "model_3d": "kx022-1020-etched.glb",+      "model_3d_plain": "kx022-1020.glb",+      "model_3d_step": "kx022-1020-etched.step",+      "model_3d_step_plain": "kx022-1020.step",+      "lbr": "kx022-1020.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SDO/ADDR",+        "type": "bidirectional",+        "description": "Serial Data Out during 4-wire SPI communication; also selects the least-significant bit of the device I2C slave address (ADDR) when the part is used in I2C mode."+      },+      {+        "number": "2",+        "name": "SDI/SDA",+        "type": "bidirectional",+        "description": "SPI serial data input (SDI) in SPI mode; bidirectional I2C serial data line (SDA) in I2C mode. Requires an external pull-up (min 1.5 kΩ) to IO_VDD for I2C operation."+      },+      {+        "number": "3",+        "name": "IO_VDD",+        "type": "power_in",+        "description": "Power supply input for the digital communication I/O pads. Operating range 1.7 V to VDD. Optionally decoupled to GND with a 0.1 µF ceramic capacitor."+      },+      {+        "number": "4",+        "name": "TRIG",+        "type": "input",+        "description": "External trigger input for the FIFO sample buffer (used in Trigger buffer mode). Tie to GND when the external trigger feature is not used."+      },+      {+        "number": "5",+        "name": "INT1",+        "type": "output",+        "description": "Physical programmable interrupt output 1. Polarity, latch behavior, and source events are configured via the INC1/INC4 registers. Leave floating if unused."+      },+      {+        "number": "6",+        "name": "INT2",+        "type": "output",+        "description": "Physical programmable interrupt output 2. Polarity, latch behavior, and source events are configured via the INC5/INC6 registers. Leave floating if unused."+      },+      {+        "number": "7",+        "name": "VDD",+        "type": "power_in",+        "description": "Main analog supply input (1.71 V to 3.6 V, 2.5 V typical). Decouple to GND with a 0.1 µF ceramic capacitor."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return (second GND pin)."+      },+      {+        "number": "10",+        "name": "nCS",+        "type": "input",+        "description": "Chip-select / interface-mode select. Tie to GND to enable SPI (and disable I2C); tie to IO_VDD to enable I2C (and disable SPI). Must not be left floating."+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. May be tied to VDD, IO_VDD, GND, or left floating."+      },+      {+        "number": "12",+        "name": "SCLK/SCL",+        "type": "input",+        "description": "Serial clock input for both SPI (SCLK, up to 10 MHz) and I2C (SCL, up to 3.4 MHz in HS-mode) communication."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}