component
KTH1601SL-ST3
Public Made by Adomby adom
CONNTEK Hall Sensor, SOT-23-3L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C516265). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+25−5
kth1601sl-st3.lbr+20−2@@ -57,6 +57,18 @@ <smd name="1" x="-1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="2" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="3" x="1.1375" y="-0.0000" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="0.3800"/>+ <vertex x="-1.2100" y="0.0500"/>+ <vertex x="-1.6900" y="0.0500"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-0.3900" x2="-0.9100" y2="0.3900" width="0.1200" layer="21"/>@@ -66,7 +78,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="0.3800"/><vertex x="-1.2100" y="0.0500"/><vertex x="-1.6900" y="0.0500"/></polygon></package>+</package> </packages> <symbols> <symbol name="KTH1601SL-ST3">@@ -94,7 +106,13 @@ <connect gate="G$1" pin="OUTPUT" pad="2"/> <connect gate="G$1" pin="GND" pad="3"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="KTH1601SL-ST3" constant="no"/>+ <attribute name="MANUFACTURER" value="CONNTEK" constant="no"/>+ <attribute name="LCSC_PN" value="C516265" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+5−3@@ -26,19 +26,21 @@ "model_3d_step": "kth1601sl-st3.step", "lbr": "kth1601sl-st3.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C516265"+ }, "pins": [ { "number": "1", "name": "VDD", "type": "power_in",- "description": "Power supply input. Operating range 1.6 V to 5.5 V (abs max 6 V). A 1 µF ceramic bypass capacitor CIN placed close to this pin is recommended for supply stabilization and noise immunity."+ "description": "Power supply input. Operating range 1.6 V to 5.5 V (abs max 6 V). A 1 \u00b5F ceramic bypass capacitor CIN placed close to this pin is recommended for supply stabilization and noise immunity." }, { "number": "2", "name": "OUTPUT", "type": "output",- "description": "Push-pull digital Hall-switch output. Drives low (VOL ≈ 0.05 V @ IOUT=1 mA) when magnetic flux exceeds Bop (turn-on) and high (VOH ≈ VDD-0.05 V) when it falls below Brp (turn-off). Maximum sink/source current 5 mA. No external pull-up resistor required."+ "description": "Push-pull digital Hall-switch output. Drives low (VOL \u2248 0.05 V @ IOUT=1 mA) when magnetic flux exceeds Bop (turn-on) and high (VOH \u2248 VDD-0.05 V) when it falls below Brp (turn-off). Maximum sink/source current 5 mA. No external pull-up resistor required." }, { "number": "3",