← Commit history
ksz8081rnaia-tr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+176−1
page.json+176−1@@ -33,5 +33,180 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "KSZ8081RNAIA-TR",+ "manufacturer": "Microchip",+ "package": "QFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Ethernet Controllers",+ "parts": {+ "symbol": "ksz8081rnaia-tr.kicad_sym",+ "footprint": "ksz8081rnaia-tr.kicad_mod",+ "model_3d": "ksz8081rnaia-tr-etched.glb",+ "model_3d_plain": "ksz8081rnaia-tr.glb",+ "model_3d_step": "ksz8081rnaia-tr-etched.step",+ "model_3d_step_plain": "ksz8081rnaia-tr.step",+ "lbr": "ksz8081rnaia-tr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD_1.2",+ "type": "power_in",+ "description": "1.2 V core supply rail (sourced from the on-chip regulator). Decouple with 2.2 µF and 0.1 µF capacitors to ground."+ },+ {+ "number": "2",+ "name": "VDDA_3.3",+ "type": "power_in",+ "description": "3.3 V analog supply rail for the PHY analog front-end."+ },+ {+ "number": "3",+ "name": "RXM",+ "type": "bidirectional",+ "description": "Physical receive/transmit signal, negative differential line of the RX/TX pair to the magnetics (Auto MDI/MDI-X swaps RX/TX function)."+ },+ {+ "number": "4",+ "name": "RXP",+ "type": "bidirectional",+ "description": "Physical receive/transmit signal, positive differential line of the RX/TX pair to the magnetics (Auto MDI/MDI-X swaps RX/TX function)."+ },+ {+ "number": "5",+ "name": "TXM",+ "type": "bidirectional",+ "description": "Physical transmit/receive signal, negative differential line of the TX/RX pair to the magnetics (Auto MDI/MDI-X swaps TX/RX function)."+ },+ {+ "number": "6",+ "name": "TXP",+ "type": "bidirectional",+ "description": "Physical transmit/receive signal, positive differential line of the TX/RX pair to the magnetics (Auto MDI/MDI-X swaps TX/RX function)."+ },+ {+ "number": "7",+ "name": "XO",+ "type": "output",+ "description": "Crystal feedback output for the 25 MHz crystal reference. Leave as a no-connect when an external oscillator or clock source is used on XI."+ },+ {+ "number": "8",+ "name": "XI",+ "type": "input",+ "description": "Reference clock input. In RMII 25 MHz mode accepts a 25 MHz ±50 ppm crystal, oscillator, or external clock. In RMII 50 MHz mode accepts a 50 MHz ±50 ppm oscillator/external clock. RNA power-up default is 25 MHz crystal on this pin."+ },+ {+ "number": "9",+ "name": "REXT",+ "type": "passive",+ "description": "Sets PHY transmit output current bias. Connect an external 6.49 kΩ 1% resistor from this pin to ground."+ },+ {+ "number": "10",+ "name": "MDIO",+ "type": "bidirectional",+ "description": "MII management interface data I/O. Open-drain with a weak internal pull-up; requires an external 1.0 kΩ pull-up resistor to VDDIO."+ },+ {+ "number": "11",+ "name": "MDC",+ "type": "input",+ "description": "MII management interface clock input, synchronous with MDIO data. Has an internal pull-up."+ },+ {+ "number": "12",+ "name": "RXD1",+ "type": "output",+ "description": "RMII receive data bit 1 output to the MAC. Synchronous with the 50 MHz RMII reference clock; two bits per clock while CRS_DV is asserted. Internally pulled down during power-up/reset (strap-in), output otherwise."+ },+ {+ "number": "13",+ "name": "RXD0",+ "type": "output",+ "description": "RMII receive data bit 0 output to the MAC. Synchronous with the 50 MHz RMII reference clock; two bits per clock while CRS_DV is asserted. Internally pulled up during power-up/reset (strap-in), output otherwise."+ },+ {+ "number": "14",+ "name": "VDDIO",+ "type": "power_in",+ "description": "Digital I/O supply rail. Selectable 3.3 V, 2.5 V, or 1.8 V to match the MAC logic level."+ },+ {+ "number": "15",+ "name": "CRS_DV/PHYAD[1:0]",+ "type": "bidirectional",+ "description": "RMII Carrier Sense / Receive Data Valid output during normal operation. Latched at de-assertion of RST# as PHYAD[1:0]: pull-up → PHY address 0x03, pull-down (default) → PHY address 0x00. PHYAD[4:2] are fixed to 000."+ },+ {+ "number": "16",+ "name": "REF_CLK",+ "type": "bidirectional",+ "description": "RMII 25 MHz mode: outputs the 50 MHz RMII reference clock to the MAC. RMII 50 MHz mode: no-connect (clock comes in on XI instead). RNA power-up default is 25 MHz mode (this pin drives 50 MHz out)."+ },+ {+ "number": "17",+ "name": "RXER",+ "type": "bidirectional",+ "description": "RMII receive-error output to the MAC. Must latch a pull-down value at the de-assertion of reset for normal operation; add an external pull-down if the MAC drives this line high at reset (or configure Register 16h Bit [15])."+ },+ {+ "number": "18",+ "name": "INTRP",+ "type": "output",+ "description": "Programmable interrupt output to the MAC/host. Open-drain with a weak internal pull-up; requires an external 1.0 kΩ pull-up resistor to VDDIO."+ },+ {+ "number": "19",+ "name": "TXEN",+ "type": "input",+ "description": "RMII transmit-enable input from the MAC. Asserted by the MAC while TXD[1:0] carry valid data (two bits per 50 MHz RMII reference clock period)."+ },+ {+ "number": "20",+ "name": "TXD0",+ "type": "input",+ "description": "RMII transmit data bit 0 input from the MAC. Sampled on the 50 MHz RMII reference clock while TXEN is asserted."+ },+ {+ "number": "21",+ "name": "TXD1",+ "type": "bidirectional",+ "description": "RMII transmit data bit 1 input from the MAC during normal operation. In NAND Tree mode this pin is used as the NAND Tree output for parametric fault-detection testing."+ },+ {+ "number": "22",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return."+ },+ {+ "number": "23",+ "name": "LED0/ANEN_SPEED",+ "type": "bidirectional",+ "description": "Programmable LED0 output during normal operation (modes selected via Register 1Fh bits [5:4]). Latched at reset de-assertion as ANEN_SPEED strap: pull-up (default) enables auto-negotiation and selects 100 Mbps; pull-down disables auto-negotiation and selects 10 Mbps. Values load into Register 0h bits [12]/[13] and Register 4h."+ },+ {+ "number": "24",+ "name": "RST#",+ "type": "input",+ "description": "Active-low chip reset input. Internal pull-up; drive low to reset the device."+ },+ {+ "number": "25",+ "name": "PAD",+ "type": "power_in",+ "description": "Exposed thermal paddle on the bottom of the QFN. Must be soldered to the board ground plane."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}