← Commit history

kp1221spa: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·1665cc06b4 · ·parent 089c1ff
1 file changed +68−1
page.json+68−1
@@ -33,5 +33,72 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "KP1221SPA",+    "manufacturer": "Kiwi Instruments",+    "package": "SOP-7",+    "pin_count": 7,+    "category": "LED Drivers",+    "parts": {+      "symbol": "kp1221spa.kicad_sym",+      "footprint": "kp1221spa.kicad_mod",+      "model_3d": "kp1221spa-etched.glb",+      "model_3d_plain": "kp1221spa.glb",+      "model_3d_step": "kp1221spa-etched.step",+      "model_3d_step_plain": "kp1221spa.step",+      "lbr": "kp1221spa.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "input",+        "description": "Constant-current output loop compensation pin. A 1-4.7 uF ceramic capacitor in series with a resistor should be connected to the chip's reference ground; the series resistor sets the over-current protection threshold (ROCP = 0 → VOCP ≈ 0.9V; 0.68kΩ → 1.2V; 2kΩ → 1.4V). Internal high/low clamp: 3V / 0.7V."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Chip reference ground. Return for all internal circuitry and the reference for COMP, VDD, ROVP, and Source pins."+      },+      {+        "number": "3",+        "name": "VDD",+        "type": "power_in",+        "description": "Chip supply pin. Normal operating voltage typ. 11.5V (10.5-13V), UVLO turn-off ≈ 8.5V, internal clamp 14V (at 5 mA). Startup current 300 uA typ; operating current 200 uA typ at Fsw = 7 kHz. Absolute max VDD = 14V."+      },+      {+        "number": "4",+        "name": "ROVP",+        "type": "input",+        "description": "Output open-circuit (OVP) protection voltage setting pin. A resistor divider from the output feedback sets the OVP threshold; absolute max voltage -0.3 to 7V."+      },+      {+        "number": "5",+        "name": "Drain",+        "type": "power_in",+        "description": "Drain of the internal 500V high-voltage MOSFET (Rdson ≈ 5.3 Ω for KP1221SP). Also used for HV startup charging (IHV = 10 mA at Drain = 20V). Absolute max Drain voltage -0.3 to 500V. Pin 5 is bonded together with pin 6 to the same Drain node."+      },+      {+        "number": "6",+        "name": "Drain",+        "type": "power_in",+        "description": "Second Drain pin of the internal high-voltage MOSFET, bonded in parallel with pin 5 to improve current handling and thermal dissipation. Same electrical node as pin 5."+      },+      {+        "number": "7",+        "name": "Source",+        "type": "output",+        "description": "Source of the internal high-voltage MOSFET; used both as switch source and current-sense node. Current-sense reference VCC_REF = 400 mV typ; min sense voltage 70 mV typ; LEB = 300 ns. Absolute max Source voltage -0.3 to 7V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}