component
KA7500CDTF
Public Made by Adomby adom
onsemi AC-DC Controllers and Regulators, SO-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ka7500cdtf",+ "title": "KA7500CDTF",+ "brief": "onsemi AC-DC Controllers and Regulators, SO-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "onsemi AC-DC Controllers and Regulators, SO-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "ka7500cdtf" ],+ "component": {+ "mpn": "KA7500CDTF",+ "manufacturer": "onsemi",+ "package": "SO-16",+ "pin_count": 16,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201242300_onsemi-KA7500CDTF_C124458.pdf",+ "parts": {+ "symbol": "ka7500cdtf.kicad_sym",+ "footprint": "ka7500cdtf.kicad_mod",+ "model_3d": "ka7500cdtf.glb",+ "model_3d_step": "ka7500cdtf.step",+ "lbr": "ka7500cdtf.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "IN1+",+ "type": "input",+ "description": "Non-inverting input of error amplifier 1 (EA1). Feedback sense input; common-mode range -0.3 V to VCC-2.0 V."+ },+ {+ "number": "2",+ "name": "IN1-",+ "type": "input",+ "description": "Inverting input of error amplifier 1 (EA1). Typically tied to a reference divider from VREF for output voltage regulation."+ },+ {+ "number": "3",+ "name": "FB/COMP",+ "type": "bidirectional",+ "description": "Feedback / compensation node. Common output of both error amplifiers and PWM comparator input. Used for loop compensation (typ. RC network to EA input)."+ },+ {+ "number": "4",+ "name": "DTC",+ "type": "input",+ "description": "Dead-Time Control input. Sets minimum dead time and maximum duty cycle. Threshold: 0 V for max duty (~45%), 3.0-3.3 V for zero duty. Input range 0.3-5.3 V."+ },+ {+ "number": "5",+ "name": "CT",+ "type": "passive",+ "description": "Oscillator timing capacitor connection. Typical CT = 0.0047 \u00b5F to 10 \u00b5F sets ramp for oscillator (1 kHz-200 kHz operating range)."+ },+ {+ "number": "6",+ "name": "RT",+ "type": "passive",+ "description": "Oscillator timing resistor connection. RT sets charging current for CT; typical RT = 1.8 k\u03a9-500 k\u03a9. Ground RT and tie pin 5 to VREF for slave operation."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. All internal circuit ground returns."+ },+ {+ "number": "8",+ "name": "C1",+ "type": "output",+ "description": "Collector of output transistor 1. Uncommitted; supports common-emitter or emitter-follower drive. VC max 40 V, IC max 200 mA per output."+ },+ {+ "number": "9",+ "name": "E1",+ "type": "output",+ "description": "Emitter of output transistor 1. Uncommitted output. Tie low for common-emitter drive; use for emitter-follower drive."+ },+ {+ "number": "10",+ "name": "E2",+ "type": "output",+ "description": "Emitter of output transistor 2. Uncommitted output paired with C2."+ },+ {+ "number": "11",+ "name": "C2",+ "type": "output",+ "description": "Collector of output transistor 2. Uncommitted; VC max 40 V, IC max 200 mA. Used with C1/E1 for push-pull or paralleled for single-ended operation."+ },+ {+ "number": "12",+ "name": "VCC",+ "type": "power_in",+ "description": "Main device supply. Recommended 7-40 V (abs max 42 V). Typical operating current ~6 mA at VCC=15 V."+ },+ {+ "number": "13",+ "name": "OC",+ "type": "input",+ "description": "Output Control. Selects operating mode: tie to GND for single-ended (parallel) output; tie to VREF for push-pull operation (outputs alternate at half oscillator frequency)."+ },+ {+ "number": "14",+ "name": "VREF",+ "type": "power_out",+ "description": "Trimmed 5 V \u00b11% bandgap reference output. Max source current 10 mA; short-circuit current limited to ~35 mA."+ },+ {+ "number": "15",+ "name": "IN2-",+ "type": "input",+ "description": "Inverting input of error amplifier 2 (EA2). Can be used for a second regulation loop (e.g. current limit) or tied off if unused."+ },+ {+ "number": "16",+ "name": "IN2+",+ "type": "input",+ "description": "Non-inverting input of error amplifier 2 (EA2). Second-loop sense input; common-mode range -0.3 V to VCC-2.0 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201242300_onsemi-KA7500CDTF_C124458.pdf",+ "pages": 9,+ "sha256": "8e9c49cee72bca94",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "onsemi",+ "Package": "SO-16",+ "Category": "PMIC",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ka7500cdtf"+ ],+ "discovery_pitch": "KA7500CDTF (onsemi) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/ka7500cdtf-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }