component
KA3525A
Public Made by Adomby adom
Minos Supervisor and Reset ICs, DIP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -40,6 +40,20 @@ KA3525A from Minos, in a DIP-16. Pinout and pin descriptions extracted from the - Footprint: `Package_DIP:DIP-16_W7.62mm` - 3D model: DIP-16 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`ka3525a.step`](ka3525a.step) | 505 KB | You want the bare part, or you mark your own boards. |+| [`ka3525a-etched.step`](ka3525a-etched.step) | 2.1 MB | You want the part with `KA3525A` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 528 faces against 284 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "ka3525a",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Minos Supervisor and Reset ICs, DIP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+15−15@@ -4,7 +4,7 @@ "slug": "ka3525a", "title": "KA3525A", "brief": "Minos Supervisor and Reset ICs, DIP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -52,31 +52,31 @@ "number": "4", "name": "OSC. Output", "type": "output",- "description": "Oscillator output. Provides the internal system clock (typical 3.0-3.5 V amplitude, 0.3-1.0 \u03bcs pulse width) useful for synchronizing additional KA3525A devices or external logic."+ "description": "Oscillator output. Provides the internal system clock (typical 3.0-3.5 V amplitude, 0.3-1.0 μs pulse width) useful for synchronizing additional KA3525A devices or external logic." }, { "number": "5", "name": "CT", "type": "passive",- "description": "Timing capacitor connection. Together with RT (pin 6) sets the oscillator frequency. Range 0.001 \u03bcF to 0.2 \u03bcF for 100 Hz to 400 kHz operation."+ "description": "Timing capacitor connection. Together with RT (pin 6) sets the oscillator frequency. Range 0.001 μF to 0.2 μF for 100 Hz to 400 kHz operation." }, { "number": "6", "name": "RT", "type": "passive",- "description": "Timing resistor connection to ground. Sets the oscillator charging current together with CT. Range 2.0 k\u03a9 to 150 k\u03a9."+ "description": "Timing resistor connection to ground. Sets the oscillator charging current together with CT. Range 2.0 kΩ to 150 kΩ." }, { "number": "7", "name": "Discharge", "type": "passive",- "description": "Discharge / dead-time adjust pin. An external resistor from CT (pin 5) to this pin sets the dead-time between the two outputs. Dead-time resistor RD range 0 to 500 \u03a9."+ "description": "Discharge / dead-time adjust pin. An external resistor from CT (pin 5) to this pin sets the dead-time between the two outputs. Dead-time resistor RD range 0 to 500 Ω." }, { "number": "8", "name": "Soft-Start", "type": "passive",- "description": "Soft-start capacitor. An internal ~50 \u03bcA current source (Vshutdown=0 V, typ 50 \u03bcA, min 25 \u03bcA, max 80 \u03bcA) charges an external capacitor to gradually increase the PWM duty cycle from zero at power-up."+ "description": "Soft-start capacitor. An internal ~50 μA current source (Vshutdown=0 V, typ 50 μA, min 25 μA, max 80 μA) charges an external capacitor to gradually increase the PWM duty cycle from zero at power-up." }, { "number": "9",@@ -94,7 +94,7 @@ "number": "11", "name": "Output A", "type": "output",- "description": "Totem-pole output A. Alternates with Output B (pin 14) to drive an external power stage. \u00b1100 mA continuous, \u00b1400 mA peak. Max duty cycle per output ~49%."+ "description": "Totem-pole output A. Alternates with Output B (pin 14) to drive an external power stage. ±100 mA continuous, ±400 mA peak. Max duty cycle per output ~49%." }, { "number": "12",@@ -112,7 +112,7 @@ "number": "14", "name": "Output B", "type": "output",- "description": "Totem-pole output B. Alternates with Output A (pin 11) at half the oscillator frequency. \u00b1100 mA continuous, \u00b1400 mA peak. Rise time typ 100 ns, fall time typ 50 ns into 1 nF load."+ "description": "Totem-pole output B. Alternates with Output A (pin 11) at half the oscillator frequency. ±100 mA continuous, ±400 mA peak. Rise time typ 100 ns, fall time typ 50 ns into 1 nF load." }, { "number": "15",@@ -124,7 +124,7 @@ "number": "16", "name": "Vref", "type": "power_out",- "description": "5.1 V \u00b11% precision reference output. Sourcing up to 20 mA (50 mA absolute max). Typically bypassed with 0.1 \u03bcF and used to bias the error-amplifier divider and external timing network."+ "description": "5.1 V ±1% precision reference output. Sourcing up to 20 mA (50 mA absolute max). Typically bypassed with 0.1 μF and used to bias the error-amplifier divider and external timing network." } ], "provenance": {@@ -150,8 +150,8 @@ "pin1": { "pad": "1", "at": [- 0.0,- 0.0+ 0,+ 0 ], "corner": "bottom-right", "source": "fab-chamfer",@@ -198,9 +198,9 @@ "docs/hero.png", "docs/ka3525a-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Minos Supervisor and Reset ICs, DIP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D." }