← Commit history

jw1571sopb-tr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·1d70482932 · ·parent 931dd41
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "JW1571SOPB#TR",+    "manufacturer": "JoulWatt Tech JW1571SOPB TR",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "AC-DC Controllers and Regulators",+    "parts": {+      "symbol": "jw1571sopb-tr.kicad_sym",+      "footprint": "jw1571sopb-tr.kicad_mod",+      "model_3d": "jw1571sopb-tr-etched.glb",+      "model_3d_plain": "jw1571sopb-tr.glb",+      "model_3d_step": "jw1571sopb-tr-etched.step",+      "model_3d_step_plain": "jw1571sopb-tr.step",+      "lbr": "jw1571sopb-tr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GATE",+        "type": "output",+        "description": "Gate driver output for the external PFC boost MOSFET. Delivers +0.6A source / -1.4A sink peak current with a gate-high voltage of ~11V and an absolute maximum rating of -0.3 to 13V."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Chip ground reference for all internal circuitry and the gate driver return."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Current sensing input from the MOSFET source resistor (RCS). Cycle-by-cycle limit VCS_MAX = 0.4V (400ns LEB); short-circuit protection threshold VCS_SCP = 1.5V (250ns LEB). Absolute max -0.3 to 5V (5 to 5.5V for <10us)."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Controller power supply input. Start-up threshold VCC_ST = 13V, UVLO = 8.2V, recommended operating range 12 to 40V, absolute maximum 45V. Typical operating current 300uA (fsw=25kHz, GATE floating)."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Output voltage feedback pin. Regulates against internal reference VFB_REF = 2.5V; FB OVP threshold 2.7V with 0.2V hysteresis. Pulling FB below VFB_ST = 0.4V disables switching and enters green mode. Absolute max -0.3 to 5V."+      },+      {+        "number": "6",+        "name": "OTP",+        "type": "input",+        "description": "External over-temperature protection input. Sources IOTP = 100uA into an external NTC divider; when the pin voltage falls below VOTP = 2V (0.2V hysteresis) the controller stops switching. Absolute max -0.3 to 5V."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect. Left unconnected in the pin functions table with no described internal function."+      },+      {+        "number": "8",+        "name": "ZCD",+        "type": "input",+        "description": "Zero-current-detection input from the boost inductor auxiliary winding for demagnetization timing and valley switching. Also used for 2nd OVP output-voltage sensing via ZCD source/sink current (IOVP2 = 1.3mA). Absolute max -0.6 to 45V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}