← Commit history

Initial commit: component/jw1551qfnah-trpbf

Ray ·934eec0f26 ·
2 files changed +94
README.mdadded+60
@@ -0,0 +1,60 @@+# JW1551QFNAH#TRPBF++**JoulWatt Tech JW1551QFNAH TRPBF** · AC-DC Controllers and Regulators · QFN-20(4x4)++JW1551QFNAH#TRPBF from JoulWatt Tech JW1551QFNAH TRPBF, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Compensation pin for the feedback loop. Internally pulled up to ~3V through ~11.5kΩ; drives burst mode thresholds (~345mV/390mV) and over-load set point (~3V). |+| 2 | NC | unconnected | No connect. |+| 3 | NC | unconnected | No connect. |+| 4 | HV | power_in | High voltage startup pin. Draws current from the bulk rail to charge VCC at startup and drives the X-cap discharge function. Absolute max -0.3 to 600V; recommended 0V to 500V. |+| 5 | NC | unconnected | No connect. |+| 6 | NC | unconnected | No connect. |+| 7 | GND | power_in | Power ground return for the controller. |+| 8 | RFM | input | Maximum switching frequency set pin. External resistor programs fMAX per fMAX = 25 + 5×10^4 / RFM(kΩ) kHz (e.g. 475kHz typical at RFM=105kΩ). |+| 9 | RT | input | Resonant time set pin. External resistor programs the resonant/dead-time interval for the active clamp switching. |+| 10 | OTP | input | Over-temperature protection pin. Connects to an external NTC; internal ~105µA pull-up, shutdown when V<~1V, recovery at ~2.25V. |+| 11 | CS | input | Current sense input from the source of the primary switch. Used for peak current control, SCP, and CS UVP (~245mV threshold). Max current set point ~600mV, short-circuit protection at ~1V. |+| 12 | GON | output | Gate/enable output for the main primary switch (driven high ~5.25V, low ~30mV). Delay from EN high to GON high ~39.5µs. |+| 13 | GAC | output | Gate/enable output for the active clamp switch (driven high ~5.25V, low ~30mV). Fires ~80ns after GON goes low. |+| 14 | EN | input | Enable pin used to disable the IC. Absolute max -0.3 to 5.5V. |+| 15 | VDD | power_out | Internal 13V LDO regulator output. Bypass with a decoupling capacitor to GND. |+| 16 | VS | input | Voltage sense input pin. Monitors auxiliary/secondary winding voltage for SW/ZVS detection, brown-in/out (~467µA/~400µA), and VS OVP/UVP (~800µA/~66.6µA). |+| 17 | VCC | power_in | Controller supply pin. Turn-on ~14.8V, turn-off ~10.6V; absolute max -0.3 to 45V. Powered by internal HV startup and by auxiliary winding/boost in run. |+| 18 | BST | output | Boost switching node for the internal boost converter that supplies VCC. Boost frequency ~1.6MHz. Absolute max -0.3 to 45V. |+| 19 | GND | power_in | Power ground return for the controller. |+| 20 | VIN | power_in | Power supply input for the internal boost converter. Range 2.5V to 38V; UVP ~2V, OVP ~40.5V. |+| EP | GND | power_in | Exposed thermal pad on the bottom of the QFN. Connect to GND plane for electrical ground return and thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | JoulWatt Tech JW1551QFNAH TRPBF |+| Package | QFN-20(4x4) |+| Category | PMIC |+| Pins | 21 |++## Ordering variants++- `JW1551QFNAH#TRPBFQFNAH#TRPBF`++## CAD (KiCad official)++- Symbol: `JW1551QFNAH#TRPBF`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm`+- 3D model: QFN-20(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [JoulWatt Tech JW1551QFNAH TRPBF datasheet](docs/jw1551qfnah-trpbf-datasheet.pdf) (13 pp, sha256 `6762b812efd5cb58`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/jw1551qfnah-trpbf-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "jw1551qfnah-trpbf",+  "version": "0.1.0",+  "type": "component",+  "description": "JoulWatt Tech JW1551QFNAH TRPBF AC-DC Controllers and Regulators, QFN-20(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "jw1551qfnah#trpbf"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "jw1551qfnah-trpbf.kicad_sym",+    "jw1551qfnah-trpbf.kicad_mod",+    "jw1551qfnah-trpbf.glb",+    "jw1551qfnah-trpbf.step",+    "jw1551qfnah-trpbf.lbr",+    "docs/hero.png",+    "docs/jw1551qfnah-trpbf-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file