component
JSM6900SO-10A
Public Made by Adomby adom
JSMSEMI Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
jsm6900so-10a: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+88−8
package.json+46−6@@ -53,7 +53,7 @@ "number": "1", "name": "IP+", "type": "passive",- "description": "Current input positive terminal (conductor pad 1 of 2); measured current up to \u00b110 A (JSM6900SO-10A) enters the internal Hall-effect current rail through this pin."+ "description": "Current input positive terminal (conductor pad 1 of 2); measured current up to ±10 A (JSM6900SO-10A) enters the internal Hall-effect current rail through this pin." }, { "number": "2",@@ -83,13 +83,13 @@ "number": "6", "name": "TEST", "type": "unconnected",- "description": "Factory test pin; must be left floating (\u60ac\u7a7a) in normal application."+ "description": "Factory test pin; must be left floating (悬空) in normal application." }, { "number": "7", "name": "OUT", "type": "output",- "description": "Analog voltage output and programming pin; outputs a voltage proportional to sensed current with 200 mV/A sensitivity (typ.) over the \u00b110 A range; output swing 0.5 V to Vcc-0.5 V; source 80 mA / sink 40 mA max."+ "description": "Analog voltage output and programming pin; outputs a voltage proportional to sensed current with 200 mV/A sensitivity (typ.) over the ±10 A range; output swing 0.5 V to Vcc-0.5 V; source 80 mA / sink 40 mA max." }, { "number": "8",@@ -109,7 +109,7 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pins 1/2 (IP+) and pins 3/4 (IP-) are each described as duplicate pads for the same conductor termin; Pin 5 (GND) and Pin 8 (VCC) are described as also serving a factory programming function (\u7f16\u7a0b\u5f15\u811a). The; Pin 7 (OUT) is also listed as a programming pin (\u7f16\u7a0b\u5f15\u811a). The programming interface appears to share O",+ "extractor flagged: Pins 1/2 (IP+) and pins 3/4 (IP-) are each described as duplicate pads for the same conductor termin; Pin 5 (GND) and Pin 8 (VCC) are described as also serving a factory programming function (编程引脚). The; Pin 7 (OUT) is also listed as a programming pin (编程引脚). The programming interface appears to share O", "vision extraction: provenance cannot be text-verified; needs consensus" ], "pages_sent": 12,@@ -133,6 +133,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "jsm6900so-10a.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "jsm6900so-10a-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "43f2e06bce2573384f6ef191ace742b0d92fcfed698fb19ba04d0b8a42639c33",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -118,7 +118,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "jsm6900so-10a.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "jsm6900so-10a-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "43f2e06bce2573384f6ef191ace742b0d92fcfed698fb19ba04d0b8a42639c33",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -166,4 +206,4 @@ "public": true }, "updated_at": "2026-09-24T23:16:47.746Z"-}+}