component
JSM24C02
Public Made by Adomby adom
JSMSEMI EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,19 +32,19 @@ "number": "1", "name": "A0", "type": "input",- "description": "Hardwired device address input bit 0. Compared against the A0 bit in the I\u00b2C device address byte to select one of up to eight 24C02 devices on a shared bus. Must be tied to VCC or GND (no internal pull)."+ "description": "Hardwired device address input bit 0. Compared against the A0 bit in the I²C device address byte to select one of up to eight 24C02 devices on a shared bus. Must be tied to VCC or GND (no internal pull)." }, { "number": "2", "name": "A1", "type": "input",- "description": "Hardwired device address input bit 1. Compared against the A1 bit in the I\u00b2C device address byte. Tie to VCC or GND."+ "description": "Hardwired device address input bit 1. Compared against the A1 bit in the I²C device address byte. Tie to VCC or GND." }, { "number": "3", "name": "A2", "type": "input",- "description": "Hardwired device address input bit 2. Compared against the A2 bit in the I\u00b2C device address byte. Tie to VCC or GND."+ "description": "Hardwired device address input bit 2. Compared against the A2 bit in the I²C device address byte. Tie to VCC or GND." }, { "number": "4",@@ -56,13 +56,13 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "I\u00b2C serial data line. Bi-directional, open-drain; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain / open-collector devices on the bus."+ "description": "I²C serial data line. Bi-directional, open-drain; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain / open-collector devices on the bus." }, { "number": "6", "name": "SCL", "type": "input",- "description": "I\u00b2C serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-trigger filtered."+ "description": "I²C serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-trigger filtered." }, { "number": "7",@@ -138,5 +138,8 @@ "docs/jsm24c02-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }