← Commit history

Initial commit: component/jl7016m8

Ray ·ff0bf46de6 ·
2 files changed +102
README.mdadded+68
@@ -0,0 +1,68 @@+# JL7016M8++**JieLi Tech** · Digital Signal Processors (DSP/DSC) · QFN-32(4x4)++JL7016M8 from JieLi Tech, in a QFN-32(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AVSS | power_in | Audio analog ground return for the audio codec and DAC/ADC front-end. Tie to the system ground plane close to VCM/DACLP/DACRP. |+| 2 | NC | unconnected | No connect. Leave floating or tie to ground per JieLi reference design. |+| 3 | HPVDD/IOVDD | power_in | Dual-function pin: HPVDD is the audio (headphone) power input (V_HPVDD max +3 V) and IOVDD is the built-in linear voltage regulator output (typ 3.0 V, up to 200 mA) that also powers the digital IO rail (2.2 V-3.6 V). Decouple externally. |+| 4 | PG8 | bidirectional | General purpose I/O port G bit 8. Alt-functions: MICIN2 (MIC2 single-ended input), MIC2_P (differential MIC2 positive), AMUX_C0 (analog mux channel C0). |+| 5 | PG7 | bidirectional | General purpose I/O port G bit 7. Alt-functions: MIC_BIAS2 (built-in resistor bias for MIC2), MIC2_N (differential MIC2 negative), AMUX_C1, ADC15 (10-bit ADC channel 15). |+| 6 | PG5 | bidirectional | General purpose I/O port G bit 5. Alt-functions: MIC_BIAS3, MIC3_N, AMUX_D1, ADC14, TMR3CK (Timer3 PWM clock input). |+| 7 | PGND | power_in | Power ground for the internal buck DC-DC converter. Route as a dedicated low-impedance return to the buck inductor / VBAT decoupling. |+| 8 | SW | power_out | Switching node of the on-chip buck DC-DC converter. Connect to the external buck inductor toward DCVDD (typ 1.25 V, up to 180 mA in DCDC mode). |+| 9 | VBAT | power_in | Lithium battery / main supply input (operating 2.2 V-4.4 V, abs max 4.5 V). Feeds the internal charger, LDO, and buck DC-DC. |+| 10 | VPWR/PP0 | power_in | Charger power input (4.5-5.5 V, abs max 6 V) for the built-in Li-ion charger. Also a high-voltage-resistant GPIO (PP0) with alt-functions UART0 TXB/RXB, PWM3, CAP1. |+| 11 | DCVDD | power_in | Internal digital core power rail (typ 1.25 V). Fed from the SW pin through the external buck inductor; requires bulk decoupling capacitor. |+| 12 | PB3 | bidirectional | High-voltage-resistant GPIO port B bit 3 (V_IH up to +5 V). Alt-functions: SPI4 Data Out (A), Q-decoder0_1, UART3 Data In (A). |+| 13 | PB2 | bidirectional | High-voltage-resistant GPIO port B bit 2. Alt-functions: LP_Touch2, SPI4 Clock (A), Q-decoder0_0, ADC7, UART3 TXA, CAP5. |+| 14 | PB1 | bidirectional | High-voltage-resistant GPIO port B bit 1. Hold LOW at power-up to reset the chip. Alt-functions: LP_Touch1, ADC6. |+| 15 | PB0 | bidirectional | High-voltage-resistant GPIO port B bit 0. Alt-functions: LP_Touch0, TMR4 (Timer4 clock input). |+| 16 | BTRF | bidirectional | Bluetooth RF antenna interface (single-ended). Connect via matching network to the 2.4 GHz antenna. Supports BR/EDR/BLE up to +9 dBm TX and -95 dBm RX sensitivity. |+| 17 | VSS | power_in | System digital ground. Tie to the main ground plane. |+| 18 | XOSCI | input | System crystal oscillator input. Connect to one terminal of the external 24 MHz crystal with the standard load capacitors. |+| 19 | XOSCO | output | System crystal oscillator output (drive side). Connect to the other terminal of the 24 MHz crystal. |+| 20 | PC5 | bidirectional | General purpose I/O port C bit 5. Alt-functions: SPI0_DAT2C, SD0_CLKA, SPI1 DOB, IIC0_SDA_B, ALNK_DAT3(B), ADC5, UART2 RXA. |+| 21 | PC4 | bidirectional | General purpose I/O port C bit 4. Alt-functions: SPI0_DIC, SD0 CMDA, SPI1 CLKB, IIC0_SCL_B, ALNK_DAT2B, ADC4, UART2 TXA, PWM4. |+| 22 | PC3 | bidirectional | General purpose I/O port C bit 3. Alt-functions: SPI0_CSC, SD0 DATOA, SPI1 DIB, ALNK_LRCKB, TMR3 (Timer3 clock input). |+| 23 | PC2 | bidirectional | General purpose I/O port C bit 2. Alt-functions: SPI0_DOC, ALNK_SCLKB, TMR1 (Timer1 clock input). |+| 24 | USBDM | bidirectional | USB 2.0 full-speed D- data line (internal pull-down). Alt-functions: SDTAP_DATB, SPI2 DOB, IIC0_SDA_A, ADC11, UART1 RXB. |+| 25 | USBDP | bidirectional | USB 2.0 full-speed D+ data line (internal pull-down). Alt-functions: SDTAP_CLKB, SPI2 CLKB, IIC0_SCL_A, ADC10, UART1 TXB. |+| 26 | PA2 | bidirectional | General purpose I/O port A bit 2. Alt-functions: MIC_BIAS0, MIC0_N, AMUX_A1, CLKOUT1, SPI1 CLKA, ALNK_MCLKA, UART1 RXA, CAP3. |+| 27 | PA1 | bidirectional | General purpose I/O port A bit 1. Alt-functions: MICIN0, MIC0_P, AMUX_A0, SPI1 DIA, UART1 TXA, PWM0. |+| 28 | DACLP | output | Left channel audio DAC output (positive). 24-bit DAC with SNR ≥ 104 dB; can drive 16Ω/32Ω speakers directly in cap-less differential or single-ended mode. |+| 29 | DACRP | output | Right channel audio DAC output (positive). Matches DACLP for stereo output. |+| 30 | NC | unconnected | No connect. Datasheet marks type as 'P' but no function is documented; leave floating. |+| 31 | NC | unconnected | No connect. Datasheet marks type as 'P' but no function is documented; leave floating. |+| 32 | VCM | passive | Audio analog reference bias (common-mode) node. Requires an external decoupling capacitor to AVSS per JieLi reference design. |+| 33 | GND_PAD | power_in | Exposed thermal/ground pad (bottom of QFN-32). Datasheet lists this as PAD = VSS = System Ground. Must be soldered to the PCB ground plane for both electrical return and heat sinking. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | JieLi Tech |+| Package | QFN-32(4x4) |+| Category | Embedded Processors & Controllers |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `JL7016M8`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm`+- 3D model: QFN-32(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [JieLi Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603346777588854784) (19 pp, sha256 `6260f48c4458fd3c`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/jl7016m8-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "jl7016m8",+  "version": "0.1.0",+  "type": "component",+  "description": "JieLi Tech Digital Signal Processors (DSP/DSC), QFN-32(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "jl7016m8"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "jl7016m8.kicad_sym",+    "jl7016m8.kicad_mod",+    "jl7016m8.glb",+    "jl7016m8.step",+    "jl7016m8.lbr",+    "docs/hero.png",+    "docs/jl7016m8-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file