← Commit history
README.mdadded+74@@ -0,0 +1,74 @@+# JL7016G8++**JieLi Tech** · Digital Signal Processors (DSP/DSC) · QFN-32(4x4)++JL7016G8 from JieLi Tech, in a QFN-32(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DACLN | output | Differential DAC Left Negative Channel (analog audio output). |+| 2 | DACLP | output | Differential DAC Left Positive Channel (analog audio output). |+| 3 | HPVDD | power_in | Audio (headphone) analog supply. Absolute max +3 V; must be a clean quiet rail for the DAC output stage. |+| 4 | PE6/PG8 | bidirectional | General-purpose I/O. Alt functions: SDPG (SD-card supply-voltage output), MICIN2 / MIC2_P differential MIC2 positive input, AMUX_C0 analog mux channel C0 input. |+| 5 | PG7 | bidirectional | General-purpose I/O. Alt functions: MIC_BIAS2 (built-in-resistor MIC bias), MIC2_N differential MIC2 negative, AMUX_C1 analog mux input, ADC15 10-bit ADC channel 15. |+| 6 | PG6 | bidirectional | General-purpose I/O. Alt functions: MICIN3 / MIC3_P differential MIC3 positive, AMUX_D0 analog mux input, FPIN2 fault detect input 2. |+| 7 | PG5 | bidirectional | General-purpose I/O. Alt functions: MIC_BIAS3 (built-in-resistor MIC bias), MIC3_N differential MIC3 negative, AMUX_D1 analog mux input, ADC14 10-bit ADC channel 14, TMR3CK PWM Timer3 clock input. |+| 8 | PGND | power_in | Ground of the integrated Buck DC-DC converter. Tie to system ground close to the inductor return. |+| 9 | SW | power_out | Switch node of the integrated Buck DC-DC converter - connects to the external inductor. |+| 10 | VBAT | power_in | Battery interface / main system supply. Operating range 2.2 V - 4.5 V (abs max 4.5 V). Feeds the internal LDO/Buck. |+| 11 | VPWR/PP0 | power_in | Charger power input (4.5 V - 5.5 V, abs max 6 V) for the built-in lithium charger (up to 200 mA). Also usable as high-voltage-resistant GPIO PP0 with alt functions UART0TXB / UART0RXB, PWM3 (Timer3 PWM out), CAP1 (Timer1 capture). |+| 12 | IOVDD | power_out | Built-in linear regulator output for I/O rail. Typ 3.0 V, up to 200 mA. Decouple with a bulk cap; also powers external I/O logic. |+| 13 | DCVDD | power_in | Internal (digital core) power rail. Typ 1.25 V. Fed by the internal Buck (via SW/inductor) or internal LDO. |+| 14 | PB5 | bidirectional | High-voltage-resistant GPIO. Alt functions: LP_Touch4 (low-power touch ch4), IIC1_SDA_A, ADC8 (10-bit ADC ch8), UART3RXB. |+| 15 | PB4 | bidirectional | High-voltage-resistant GPIO. Alt functions: LP_Touch3, CLKOUT0, SPI4DIA (SPI4 data in A), IIC1_SCL_A, UART3TXB, TMR2 (Timer2 clock input). |+| 16 | PB1 | bidirectional | High-voltage-resistant GPIO. Hold at logic 0 to reset the chip. Alt functions: LP_Touch1, ADC6. |+| 17 | BTRF | bidirectional | Bluetooth RF antenna interface. Route as a controlled-impedance 50 Ω trace to an impedance-matching network and chip antenna. |+| 18 | XOSCI | input | System crystal oscillator input. Connect to one terminal of the 24 MHz crystal with load caps to ground. |+| 19 | XOSCO | output | System crystal oscillator output. Connect to the other terminal of the 24 MHz crystal with load caps to ground. |+| 20 | PC5 | bidirectional | General-purpose I/O. Alt functions: SPI0_DAT2C, SD0_CLKA, SPI1DOB, IIC0_SDA_B, ALNK_DAT3B (audio-link data3), ADC5, UART2RXA. |+| 21 | PC4 | bidirectional | General-purpose I/O. Alt functions: SPI0_DIC, SD0CMDA, SPI1CLKB, IIC0_SCL_B, ALNK_DAT2B, ADC4, UART2TXA, PWM4 (Timer4 PWM output). |+| 22 | PC3 | bidirectional | General-purpose I/O. Alt functions: SPI0_CSC (chip select), SD0DATOA, SPI1DIB, ALNK_LRCKB (audio-link word select), TMR3 (Timer3 clock input). |+| 23 | USBDM | bidirectional | USB 2.0 full-speed D- (negative data, internal pull-down). Alt functions: SDTAP_DATB, SPI2DOB, IIC0_SDA_A, ADC11, UART1RXB. |+| 24 | USBDP | bidirectional | USB 2.0 full-speed D+ (positive data, internal pull-down). Alt functions: SDTAP_CLKB, SPI2CLKB, IIC0_SCL_A, ADC10, UART1TXB. |+| 25 | PA4 | bidirectional | General-purpose I/O. Alt functions: MIC_BIAS1, MIC1_N differential MIC1 negative, AMUX_B1 analog mux input, SPI2DIA, ALNK_DAT1A, CAP2 (Timer2 capture). |+| 26 | PA3 | bidirectional | General-purpose I/O. Alt functions: MICIN1 / MIC1_P differential MIC1 positive, AMUX_B0 analog mux input, SPI1DOA, ALNK_DAT0A, PWM1 (Timer1 PWM output). |+| 27 | PA2 | bidirectional | General-purpose I/O. Alt functions: MIC_BIAS0, MIC0_N differential MIC0 negative, AMUX_A1 analog mux input, CLKOUT1, SPI1CLKA, ALNK_MCLKA (audio-link master clock), UART1RXA, CAP3 (Timer3 capture). |+| 28 | PA1 | bidirectional | General-purpose I/O. Alt functions: MICIN0 / MIC0_P differential MIC0 positive, AMUX_A0 analog mux input, SPI1DIA, UART1TXA, PWM0 (Timer0 PWM output). |+| 29 | PA0 | bidirectional | General-purpose I/O. Alt functions: MICLDO (MIC power supply), ADC0 (10-bit ADC channel 0). |+| 30 | ACM | passive | Audio analog reference bias. Bypass to AVSS with a decoupling cap per Jieli reference design. |+| 31 | VCM | passive | Audio analog reference bias (common-mode). Bypass to AVSS with a decoupling cap per Jieli reference design. |+| 32 | AVSS | power_in | Audio analog ground. Tie to system ground through a single-point / star connection to minimize noise coupling. |+| 33 | VSS | power_in | Exposed thermal / EPAD system ground. Solder to the PCB ground plane with a stitching via array for thermal and electrical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | JieLi Tech |+| Package | QFN-32(4x4) |+| Category | Embedded Processors & Controllers |+| Pins | 33 |++## Ordering variants++Same part, different packaging or reel option.++- `JL7016G8`++## CAD (KiCad official)++- Symbol: `JL7016G8`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm`+- 3D model: QFN-32(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [JieLi Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603010897308758016) (18 pp, sha256 `cb9fdc82553aa3bd`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/jl7016g8-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "jl7016g8",+ "version": "0.1.0",+ "type": "component",+ "description": "JieLi Tech Digital Signal Processors (DSP/DSC), QFN-32(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "jl7016g8"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "jl7016g8.kicad_sym",+ "jl7016g8.kicad_mod",+ "jl7016g8.glb",+ "jl7016g8.step",+ "jl7016g8.lbr",+ "docs/hero.png",+ "docs/jl7016g8-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}