← Commit history
iso7710dr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+75−1
page.json+75−1@@ -33,5 +33,79 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "ISO7710DR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Digital Isolators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/iso7710.pdf",+ "parts": {+ "symbol": "iso7710dr.kicad_sym",+ "footprint": "iso7710dr.kicad_mod",+ "model_3d": "iso7710dr-etched.glb",+ "model_3d_plain": "iso7710dr.glb",+ "model_3d_step": "iso7710dr-etched.step",+ "model_3d_step_plain": "iso7710dr.step",+ "lbr": "iso7710dr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC1",+ "type": "power_in",+ "description": "Side-1 supply voltage, 2.25 V to 5.5 V. Bypass with a low-ESR ceramic capacitor (≥100 nF) placed close to the pin."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "input",+ "description": "Digital input on side 1. CMOS-compatible logic input; the state is transmitted across the isolation barrier and reproduced at OUT."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Can be left floating or tied to GND1 for best noise immunity."+ },+ {+ "number": "4",+ "name": "GND1",+ "type": "power_in",+ "description": "Ground reference for side 1. Isolated from GND2 by the internal capacitive barrier."+ },+ {+ "number": "5",+ "name": "GND2",+ "type": "power_in",+ "description": "Ground reference for side 2. Isolated from GND1 by the internal capacitive barrier."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Can be left floating or tied to GND2 for best noise immunity."+ },+ {+ "number": "7",+ "name": "OUT",+ "type": "output",+ "description": "Digital output on side 2. Push-pull CMOS output that mirrors the state of IN across the isolation barrier."+ },+ {+ "number": "8",+ "name": "VCC2",+ "type": "power_in",+ "description": "Side-2 supply voltage, 2.25 V to 5.5 V. Bypass with a low-ESR ceramic capacitor (≥100 nF) placed close to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}