← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# ISO3082DWR++**Texas Instruments** · RS-485 / RS-422 ICs · SOIC-16-300mil++ISO3082DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC1 | power_in | Logic-side supply. 3.15 V to 5.5 V (5 V nominal for 5-V operation, 3.15-3.6 V for 3.3-V operation). Decouple with a low-ESR bypass capacitor to GND1. |+| 2 | GND1 | power_in | Logic-side ground reference. Return for VCC1 and the D/DE/RE/R logic signals. Galvanically isolated from GND2. |+| 3 | R | output | Receiver output on the logic side. Logic-level output of the differential receiver comparing bus lines A and B; VOH ≈ VCC1 - 0.4 V typ, VOL ≈ 0.15 V typ. High-impedance when RE is high. |+| 4 | RE | input | Receiver enable, active low. Drive low to enable the receiver output R; drive high to place R in high-impedance. 3.3-V/5-V logic-level input; 5-V tolerant. |+| 5 | DE | input | Driver enable, active high. Drive high to enable the differential bus driver onto A/B; drive low to place bus outputs in high-impedance. 3.3-V/5-V logic-level input. |+| 6 | D | input | Driver input on the logic side. Logic-level input that determines the polarity of the differential driver on A/B when DE is asserted. VIH ≥ 2 V, VIL ≤ 0.8 V. |+| 7 | GND1 | power_in | Logic-side ground (tied to pin 2). Multiple GND1 pins improve return-path integrity for the isolated logic side. |+| 8 | GND1 | power_in | Logic-side ground (tied to pin 2). Multiple GND1 pins improve return-path integrity for the isolated logic side. |+| 9 | GND2 | power_in | Bus-side ground. Return for VCC2 and the RS-485 bus terminals A/B. Galvanically isolated from GND1. |+| 10 | GND2 | power_in | Bus-side ground (tied to pin 9). Multiple GND2 pins improve return-path integrity for the isolated bus side. |+| 11 | NC | unconnected | No internal connection. On the ISO3082/ISO3088 half-duplex variants this pin is unused (corresponds to the Y driver output on the full-duplex ISO3080/86). |+| 12 | A | bidirectional | Non-inverting RS-485 bus I/O. Driver output when DE is high, receiver non-inverting input otherwise. Tolerates -7 V to +12 V bus common-mode; ±12 kV HBM ESD to GND2. |+| 13 | B | bidirectional | Inverting RS-485 bus I/O. Driver output when DE is high, receiver inverting input otherwise. Tolerates -7 V to +12 V bus common-mode; ±12 kV HBM ESD to GND2. |+| 14 | NC | unconnected | No internal connection. On the ISO3082/ISO3088 half-duplex variants this pin is unused (corresponds to the Z driver output on the full-duplex ISO3080/86). |+| 15 | GND2 | power_in | Bus-side ground (tied to pin 9). Multiple GND2 pins improve return-path integrity for the isolated bus side. |+| 16 | VCC2 | power_in | Bus-side supply. 4.5 V to 5.5 V (5 V nominal). Powers the isolated bus-side transceiver; decouple with a low-ESR bypass capacitor to GND2. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Interface |+| Pins | 16 |++## Ordering variants++- `ISO3082DWRDW`+- `ISO3082DWRDWR`++## CAD (KiCad official)++- Symbol: `ISO3082DWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso3082dwr.pdf) (20 pp, sha256 `5409d7f5b945e3a3`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/iso3082dwr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "iso3082dwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RS-485 / RS-422 ICs, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "iso3082dwr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "iso3082dwr.kicad_sym",+ "iso3082dwr.kicad_mod",+ "iso3082dwr.glb",+ "iso3082dwr.step",+ "iso3082dwr.lbr",+ "docs/hero.png",+ "docs/iso3082dwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}