← Commit history

iso3080dwr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·818b5ecf3f · ·parent 233847b
1 file changed +123−1
page.json+123−1
@@ -33,5 +33,127 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "ISO3080DWR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16-300mil",+    "pin_count": 16,+    "category": "RS-485 / RS-422 ICs",+    "datasheet": "https://www.ti.com/lit/ds/symlink/iso3080dwr.pdf",+    "parts": {+      "symbol": "iso3080dwr.kicad_sym",+      "footprint": "iso3080dwr.kicad_mod",+      "model_3d": "iso3080dwr-etched.glb",+      "model_3d_plain": "iso3080dwr.glb",+      "model_3d_step": "iso3080dwr-etched.step",+      "model_3d_step_plain": "iso3080dwr.step",+      "lbr": "iso3080dwr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VCC1",+        "type": "power_in",+        "description": "Logic-side supply voltage. 3.15-3.6 V for 3.3-V operation or 4.5-5.5 V for 5-V operation. Bypass to GND1 with a low-ESR ceramic capacitor close to the pin."+      },+      {+        "number": "2",+        "name": "GND1",+        "type": "power_in",+        "description": "Logic-side (VCC1) ground reference. Isolated from the bus-side ground GND2 by the internal isolation barrier."+      },+      {+        "number": "3",+        "name": "R",+        "type": "output",+        "description": "Receiver output on the logic side. Driven high when A-B > +200 mV, low when A-B < -200 mV, and held high by the fail-safe receiver when the bus is open, shorted, or idle. Referenced to VCC1/GND1."+      },+      {+        "number": "4",+        "name": "RE",+        "type": "input",+        "description": "Receiver enable, active LOW. Drive low to enable the receiver output R; drive high to place R in high-impedance. 3.3-V compatible input that is also 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V."+      },+      {+        "number": "5",+        "name": "DE",+        "type": "input",+        "description": "Driver enable, active HIGH. Drive high to enable the differential driver outputs Y/Z; drive low to place them in high-impedance. 3.3-V compatible input, 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V."+      },+      {+        "number": "6",+        "name": "D",+        "type": "input",+        "description": "Driver data input on the logic side. Logic high produces Y high / Z low; logic low produces Y low / Z high (when DE is high). 3.3-V compatible, 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V."+      },+      {+        "number": "7",+        "name": "GND1",+        "type": "power_in",+        "description": "Logic-side ground. Tie to pin 2 GND1 externally. Multiple GND1 pins provide low-inductance return for the logic-side supply and improve isolation-barrier common-mode performance."+      },+      {+        "number": "8",+        "name": "GND1",+        "type": "power_in",+        "description": "Logic-side ground. Tie to pin 2 GND1 externally. Multiple GND1 pins provide low-inductance return for the logic-side supply and improve isolation-barrier common-mode performance."+      },+      {+        "number": "9",+        "name": "GND2",+        "type": "power_in",+        "description": "Bus-side ground. Tie to pin 10 and pin 15 GND2 externally. Isolated from GND1 by the internal barrier; provides the return for the RS-485 bus driver."+      },+      {+        "number": "10",+        "name": "GND2",+        "type": "power_in",+        "description": "Bus-side ground. Tie to pin 9 and pin 15 GND2 externally. Isolated from GND1 by the internal barrier."+      },+      {+        "number": "11",+        "name": "Y",+        "type": "output",+        "description": "Non-inverting differential driver output (RS-485 bus). Drives high when D=1 with DE=1, driving the far end high with respect to Z. VOD >= 1.5 V into 54 Ohm; VOC ~2.6 V typ. Withstands -7 V to +12 V bus common-mode range."+      },+      {+        "number": "12",+        "name": "Z",+        "type": "output",+        "description": "Inverting differential driver output (RS-485 bus). Complementary to Y. Driver output current is limited (+/-60 mA) and the pin tolerates -9 V to +14 V absolute and -7 V to +12 V operating common-mode."+      },+      {+        "number": "13",+        "name": "B",+        "type": "input",+        "description": "Inverting receiver differential input (RS-485 bus). Together with A senses the received differential signal; receiver output R goes low when A-B < -200 mV. Presents 1/8 unit load (>=96 kOhm), allowing up to 256 nodes on one bus."+      },+      {+        "number": "14",+        "name": "A",+        "type": "input",+        "description": "Non-inverting receiver differential input (RS-485 bus). Receiver output R goes high when A-B > +200 mV; fail-safe biasing forces R high when the bus is open, shorted, or idle. -7 V to +12 V common-mode."+      },+      {+        "number": "15",+        "name": "GND2",+        "type": "power_in",+        "description": "Bus-side ground. Tie to pins 9 and 10 GND2 externally. Provides the return for VCC2 and the RS-485 bus driver."+      },+      {+        "number": "16",+        "name": "VCC2",+        "type": "power_in",+        "description": "Bus-side supply voltage, 4.5-5.5 V. Powers the isolated RS-485 driver/receiver. Bypass to GND2 with a low-ESR ceramic capacitor close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}