← Commit history

Initial commit: component/iso3080dwr

Ray ·7a29631168 ·
2 files changed +91
README.mdadded+57
@@ -0,0 +1,57 @@+# ISO3080DWR++**Texas Instruments** · RS-485 / RS-422 ICs · SOIC-16-300mil++ISO3080DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC1 | power_in | Logic-side supply voltage. 3.15-3.6 V for 3.3-V operation or 4.5-5.5 V for 5-V operation. Bypass to GND1 with a low-ESR ceramic capacitor close to the pin. |+| 2 | GND1 | power_in | Logic-side (VCC1) ground reference. Isolated from the bus-side ground GND2 by the internal isolation barrier. |+| 3 | R | output | Receiver output on the logic side. Driven high when A-B > +200 mV, low when A-B < -200 mV, and held high by the fail-safe receiver when the bus is open, shorted, or idle. Referenced to VCC1/GND1. |+| 4 | RE | input | Receiver enable, active LOW. Drive low to enable the receiver output R; drive high to place R in high-impedance. 3.3-V compatible input that is also 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V. |+| 5 | DE | input | Driver enable, active HIGH. Drive high to enable the differential driver outputs Y/Z; drive low to place them in high-impedance. 3.3-V compatible input, 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V. |+| 6 | D | input | Driver data input on the logic side. Logic high produces Y high / Z low; logic low produces Y low / Z high (when DE is high). 3.3-V compatible, 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V. |+| 7 | GND1 | power_in | Logic-side ground. Tie to pin 2 GND1 externally. Multiple GND1 pins provide low-inductance return for the logic-side supply and improve isolation-barrier common-mode performance. |+| 8 | GND1 | power_in | Logic-side ground. Tie to pin 2 GND1 externally. Multiple GND1 pins provide low-inductance return for the logic-side supply and improve isolation-barrier common-mode performance. |+| 9 | GND2 | power_in | Bus-side ground. Tie to pin 10 and pin 15 GND2 externally. Isolated from GND1 by the internal barrier; provides the return for the RS-485 bus driver. |+| 10 | GND2 | power_in | Bus-side ground. Tie to pin 9 and pin 15 GND2 externally. Isolated from GND1 by the internal barrier. |+| 11 | Y | output | Non-inverting differential driver output (RS-485 bus). Drives high when D=1 with DE=1, driving the far end high with respect to Z. VOD >= 1.5 V into 54 Ohm; VOC ~2.6 V typ. Withstands -7 V to +12 V bus common-mode range. |+| 12 | Z | output | Inverting differential driver output (RS-485 bus). Complementary to Y. Driver output current is limited (+/-60 mA) and the pin tolerates -9 V to +14 V absolute and -7 V to +12 V operating common-mode. |+| 13 | B | input | Inverting receiver differential input (RS-485 bus). Together with A senses the received differential signal; receiver output R goes low when A-B < -200 mV. Presents 1/8 unit load (>=96 kOhm), allowing up to 256 nodes on one bus. |+| 14 | A | input | Non-inverting receiver differential input (RS-485 bus). Receiver output R goes high when A-B > +200 mV; fail-safe biasing forces R high when the bus is open, shorted, or idle. -7 V to +12 V common-mode. |+| 15 | GND2 | power_in | Bus-side ground. Tie to pins 9 and 10 GND2 externally. Provides the return for VCC2 and the RS-485 bus driver. |+| 16 | VCC2 | power_in | Bus-side supply voltage, 4.5-5.5 V. Powers the isolated RS-485 driver/receiver. Bypass to GND2 with a low-ESR ceramic capacitor close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Interface |+| Pins | 16 |++## Ordering variants++- `ISO3080DWR`+- `ISO3080DWRDWG4`+- `ISO3080DWRG4`++## CAD (KiCad official)++- Symbol: `ISO3080DWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso3080dwr.pdf) (None pp, sha256 `7c74bf82e645e79f`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/iso3080dwr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "iso3080dwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS-485 / RS-422 ICs, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "iso3080dwr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "iso3080dwr.kicad_sym",+    "iso3080dwr.kicad_mod",+    "iso3080dwr.glb",+    "iso3080dwr.step",+    "iso3080dwr.lbr",+    "docs/hero.png",+    "docs/iso3080dwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file