← Commit history
README.md+59−48@@ -8,22 +8,22 @@ ISO1641DWR from TEXAS INSTRUMENTS, in a SOIC-16. Pinout and pin descriptions ext | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND1 | power_in | Ground for side 1; all voltages are referenced to the local ground pin (GND1 or GND2). |-| 2 | NC | unconnected | No connection; leave unconnected. |-| 3 | VCC1 | power_in | Side 1 supply voltage, 3.0 V to 5.5 V recommended, with a 0.1-µF decoupling capacitor to GND1. |-| 4 | NC | unconnected | No connection; leave unconnected. |-| 5 | SDA1 | bidirectional | Side 1 serial data input/output (bidirectional); side 1 bus load is limited to 80 pF and the output sinks 0.5 to 3.5 mA. |-| 6 | SCL1 | input | Side 1 serial clock input only on ISO1641 (unidirectional); input low threshold maximum is 480 mV and high threshold is 0.7 × VCC1 minimum. |-| 7 | GND1 | power_in | Ground for side 1; all voltages are referenced to the local ground pin (GND1 or GND2). |-| 8 | NC | unconnected | No connection; leave unconnected. |-| 9 | GND2 | power_in | Ground for side 2; all voltages are referenced to the local ground pin (GND1 or GND2). |-| 10 | NC | unconnected | No connection; leave unconnected. |-| 11 | SCL2 | output | Side 2 serial clock output only on ISO1641 (unidirectional, open-drain); sinks 0.5 to 50 mA with a maximum load of 400 pF. |-| 12 | SDA2 | bidirectional | Side 2 serial data input/output (bidirectional, open-drain); sinks 0.5 to 50 mA with a maximum load of 400 pF, and is hot-swap protected while VCC2 is below UVLO. |-| 13 | NC | unconnected | No connection; leave unconnected. |-| 14 | VCC2 | power_in | Side 2 supply voltage, 2.25 V to 5.5 V recommended, with a 0.1-µF decoupling capacitor to GND2. |-| 15 | NC | unconnected | No connection; leave unconnected. |-| 16 | GND2 | power_in | Ground for side 2; all voltages are referenced to the local ground pin (GND1 or GND2). |+| 1 | GND1 | power_in | Ground for side 1 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC1 and GND1. |+| 2 | NC | unconnected | No connection; the datasheet lists this pin as not internally connected. |+| 3 | VCC1 | power_in | Side 1 supply voltage, specified at 3.0 V to 5.5 V, to be decoupled with 0.1 µF to GND1. |+| 4 | NC | unconnected | No connection; the datasheet lists this pin as not internally connected. |+| 5 | SDA1 | bidirectional | Side 1 serial data input/output, an open-drain I2C line whose low-level output is VOL1 of 570 to 710 mV at 0.5 to 3.5 mA. |+| 6 | SCL1 | input | Side 1 serial clock input only on the ISO1641, since the clock channel is unidirectional and has no side 1 output. |+| 7 | GND1 | power_in | Ground for side 1 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC1 and GND1. |+| 8 | NC | unconnected | No connection; the datasheet lists this pin as not internally connected. |+| 9 | GND2 | power_in | Ground for side 2 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC2 and GND2. |+| 10 | NC | unconnected | No connection; the datasheet lists this pin as not internally connected. |+| 11 | SCL2 | output | Side 2 open-drain serial clock output on the ISO1641, driving the I2C bus with up to 400 pF of load capacitance (C2). |+| 12 | SDA2 | bidirectional | Side 2 serial data input/output, an open-drain I2C line rated for 50 mA sink current with up to 400 pF of load capacitance. |+| 13 | NC | unconnected | No connection; the datasheet lists this pin as not internally connected. |+| 14 | VCC2 | power_in | Side 2 supply voltage, specified at 2.25 V to 5.5 V, to be decoupled with 0.1 µF to GND2. |+| 15 | NC | unconnected | No connection; the datasheet lists this pin as not internally connected. |+| 16 | GND2 | power_in | Ground for side 2 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC2 and GND2. | ## Key specifications @@ -40,17 +40,17 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage VCC1, VCC2 | VCC1, VCC2 | -0.5 | | 6 | V | | 8 |-| Input/output voltage SDA1, SCL1 | | -0.5 | | | V | | 8 |-| Input/output voltage SDA2, SCL2 | | -0.5 | | | V | | 8 |-| Input/output current SDA1, SCL1 | | 0 | | 20 | mA | | 8 |-| Input/output current SDA2, SCL2 | | 0 | | 100 | mA | | 8 |+| Supply voltage | VCC1, VCC2 | -0.5 | | 6 | V | | 8 |+| Input/output voltage, SDA1 and SCL1 | SDA1, SCL1 | -0.5 | | | V | | 8 |+| Input/output voltage, SDA2 and SCL2 | SDA2, SCL2 | -0.5 | | | V | | 8 |+| Input/output current, SDA1 and SCL1 | SDA1, SCL1 | 0 | | 20 | mA | | 8 |+| Input/output current, SDA2 and SCL2 | SDA2, SCL2 | 0 | | 100 | mA | | 8 | | Maximum junction temperature | TJ | | | 150 | °C | | 8 | | Storage temperature | Tstg | -65 | | 150 | °C | | 8 |-| Supply voltage, Side 1 UVLO threshold when rising | VCC1(UVLO+) | 2.7 | | 2.9 | V | | 8 |-| Supply voltage, Side 1 UVLO threshold when falling | VCC1(UVLO-) | 2.3 | | 2.6 | V | | 8 |-| Supply voltage, Side 2 UVLO threshold when rising | VCC2(UVLO+) | 2 | | 2.25 | V | | 8 |-| Supply voltage, Side 2 UVLO threshold when falling | VCC2(UVLO-) | 1.7 | | 1.8 | V | | 8 |+| UVLO threshold when supply voltage is rising, Side 1 | VCC1(UVLO+) | 2.7 | | 2.9 | V | | 8 |+| UVLO threshold when supply voltage is falling, Side 1 | VCC1(UVLO-) | 2.3 | | 2.6 | V | | 8 |+| UVLO threshold when supply voltage is rising, Side 2 | VCC2(UVLO+) | 2 | | 2.25 | V | | 8 |+| UVLO threshold when supply voltage is falling, Side 2 | VCC2(UVLO-) | 1.7 | | 1.8 | V | | 8 | | Supply voltage UVLO hysteresis, Side 1 | VHYS1(UVLO) | 100 | | 150 | mV | | 8 | | Supply voltage UVLO hysteresis, Side 2 | VHYS2(UVLO) | 100 | | 150 | mV | | 8 | | Supply voltage, Side 1 | VCC1 | 3 | | 5.5 | V | | 8 |@@ -65,30 +65,41 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Capacitive load, Side 2 | C2 | | | 400 | pF | | 9 | | I2C Operating frequency | fMAX | | | 1.7 | MHz | | 9 | | Ambient temperature | TA | -40 | 25 | 125 | °C | | 9 |-| Voltage input threshold low, Side 1 (SDA1 and SCL1) | VILT1 | 480 | | 560 | mV | | 14 |-| Voltage input threshold high, Side 1 (SDA1 and SCL1) | VIHT1 | 520 | | 620 | mV | | 14 |-| Voltage input hysteresis, Side 1 | VHYST1 | 50 | | 60 | mV | VIHT1, VILT1 | 14 |-| Low-level output voltage, Side 1 (SDA1 and SCL1) | VOL1 | 570 | 650 | 710 | mV | 0.5 mA ≤ (ISDA1 and ISCL1) ≤ 3.5 mA | 14 |+| Junction-to-ambient thermal resistance (DW, 16 pins) | RθJA | | 62.4 | | °C/W | | 9 |+| Junction-to-case (top) thermal resistance (DW, 16 pins) | RθJC(top) | | 29.5 | | °C/W | | 9 |+| Junction-to-board thermal resistance (DW, 16 pins) | RθJB | | 33.5 | | °C/W | | 9 |+| Junction-to-top characterization parameter (DW, 16 pins) | ψJT | | 11.7 | | °C/W | | 9 |+| Junction-to-board characterization parameter (DW, 16 pins) | ψJB | | 32.4 | | °C/W | | 9 |+| Voltage input threshold low, SDA1 and SCL1 | VILT1 | 480 | | 560 | mV | | 14 |+| Voltage input threshold high, SDA1 and SCL1 | VIHT1 | 520 | | 620 | mV | | 14 |+| Voltage input hysteresis, SDA1 and SCL1 | VHYST1 | 50 | | 60 | mV | VIHT1, VILT1 | 14 |+| Low-level output voltage, SDA1 and SCL1 | VOL1 | 570 | 650 | 710 | mV | 0.5 mA ≤ (ISDA1 and ISCL1) ≤ 3.5 mA | 14 | | Low-level output voltage to high-level input voltage threshold difference, SDA1 and SCL1 | ΔVOIT1 | 50 | | | mV | 0.5 mA ≤ (ISDA1 and ISCL1) ≤ 3.5 mA | 14 |-| Low-level output voltage, Side 2 (SDA2 and SCL2) | VOL2 | | | 0.4 | V | 0.5 mA ≤ (ISDA2 and ISCL2) ≤ 50 mA | 14 |-| Input leakage currents (SDA1, SCL1, SDA2, and SCL2) | /II/ | | 0.01 | 10 | µA | VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2 | 14 |+| Low-level output voltage, SDA2 and SCL2 | VOL2 | | | 0.4 | V | 0.5 mA ≤ (ISDA2 and ISCL2) ≤ 50 mA | 14 |+| Input leakage currents, SDA1, SCL1, SDA2, SCL2 | /II/ | 0.01 | | 10 | µA | VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2 | 14 |+| Input capacitance to local ground, SDA1, SCL1, SDA2, SCL2 | CI | | | 10 | pF | VI = 0.4 × sin(2e6*πt) + VDDx / 2 | 14 | | Common-mode transient immunity | CMTI | 50 | 100 | | kV/µs | VCM = 1000 V | 14 |-| Supply current, Side 2 (ISO1641), 2.25 V ≤ VCC2 ≤ 2.75 V, SDA/SCL low | ICC2 | | 3.8 | 5.2 | mA | 2.25 V ≤ VCC2 ≤ 2.75 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1, R2, C1, C2 open | 15 |-| Supply current, Side 2 (ISO1641), 2.25 V ≤ VCC2 ≤ 2.75 V, SDA/SCL high | ICC2 | | 2.7 | 3.5 | mA | 2.25 V ≤ VCC2 ≤ 2.75 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1, R2, C1, C2 open | 15 |-| Supply current, Side 1 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, SDA/SCL low | ICC1 | | 4.6 | 6.1 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1, R2, C1, C2 open | 15 |-| Supply current, Side 1 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, SDA/SCL high | ICC1 | | 2.4 | 3.2 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1, R2, C1, C2 open | 15 |-| Supply current, Side 2 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, SDA/SCL low | ICC2 | | 3.9 | 5.2 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1, R2, C1, C2 open | 16 |-| Supply current, Side 2 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, SDA/SCL high | ICC2 | | 2.8 | 3.5 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1, R2, C1, C2 open | 16 |-| Supply current, Side 1 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, SDA/SCL low | ICC1 | | 4.7 | 6.2 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1, R2, C1, C2 open | 17 |-| Supply current, Side 1 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, SDA/SCL high | ICC1 | | 2.5 | 3.2 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1, R2, C1, C2 open | 17 |-| Supply current, Side 2 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, SDA/SCL low | ICC2 | | 3.9 | 5.3 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1, R2, C1, C2 open | 18 |-| Supply current, Side 2 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, SDA/SCL high | ICC2 | | 2.8 | 3.6 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1, R2, C1, C2 open | 18 |-| Input capacitance to local ground (SDA1, SCL1, SDA2, and SCL2) | CI | | 10 | | pF | VI = 0.4 × sin(2e6*πt) + VDDx / 2 | 14 |-| Junction-to-ambient thermal resistance (DW SOIC-16) | RθJA | | 62.4 | | °C/W | | 9 |-| Junction-to-case (top) thermal resistance (DW SOIC-16) | RθJC(top) | | 29.5 | | °C/W | | 9 |-| Junction-to-board thermal resistance (DW SOIC-16) | RθJB | | 33.5 | | °C/W | | 9 |-| Junction-to-top characterization parameter (DW SOIC-16) | ψJT | | 11.7 | | °C/W | | 9 |-| Junction-to-board characterization parameter (DW SOIC-16) | ψJB | | 32.4 | | °C/W | | 9 |+| Supply current, Side 2 (ISO1641), 2.25 V ≤ VCC2 ≤ 2.75 V, bus lines low | ICC2 | | 3.8 | 5.2 | mA | 2.25 V ≤ VCC2 ≤ 2.75 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1 and R2 = Open, C1 and C2 = Open | 15 |+| Supply current, Side 2 (ISO1641), 2.25 V ≤ VCC2 ≤ 2.75 V, bus lines high | ICC2 | | 2.7 | 3.5 | mA | 2.25 V ≤ VCC2 ≤ 2.75 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1 and R2 = Open, C1 and C2 = Open | 15 |+| Supply current, Side 1 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, bus lines low | ICC1 | | 4.6 | 6.1 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1 and R2 = Open, C1 and C2 = Open | 15 |+| Supply current, Side 1 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, bus lines high | ICC1 | | 2.4 | 3.2 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1 and R2 = Open, C1 and C2 = Open | 15 |+| Supply current, Side 2 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, bus lines low | ICC2 | | 3.9 | 5.2 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1 and R2 = Open, C1 and C2 = Open | 16 |+| Supply current, Side 2 (ISO1641), 3 V ≤ VCC1, VCC2 ≤ 3.6 V, bus lines high | ICC2 | | 2.8 | 3.5 | mA | 3 V ≤ VCC1, VCC2 ≤ 3.6 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1 and R2 = Open, C1 and C2 = Open | 16 |+| Supply current, Side 1 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, bus lines low | ICC1 | | 4.7 | 6.2 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1 and R2 = Open, C1 and C2 = Open | 17 |+| Supply current, Side 1 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, bus lines high | ICC1 | | 2.5 | 3.2 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1 and R2 = Open, C1 and C2 = Open | 17 |+| Supply current, Side 2 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, bus lines low | ICC2 | | 3.9 | 5.3 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = GND1, VSDA2, VSCL2 = GND2; R1 and R2 = Open, C1 and C2 = Open | 18 |+| Supply current, Side 2 (ISO1641), 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V, bus lines high | ICC2 | | 2.8 | 3.6 | mA | 4.5 V ≤ VCC1, VCC2 ≤ 5.5 V; VSDA1, VSCL1 = VCC1, VSDA2, VSCL2 = VCC2; R1 and R2 = Open, C1 and C2 = Open | 18 |+| Time to recover from UVLO | tUVLO | 36 | 95 | 151 | µs | VCC1 > VCC1(UVLO+) or VCC2 > VCC2(UVLO+), I2C bus Idle | 18 |+| Output signal fall time, SDA1 and SCL1 (0.7 × VCC1 ≥ VO ≥ 0.3 × VCC1) | tf1 | 6 | 16 | 22 | ns | 0.7 × VCC1 ≥ VO ≥ 0.3 × VCC1, R1 = 1430 Ω, C1 = 40 pF, R2 = 95.3 Ω, C2 = 400 pF | 20 |+| Output signal fall time, SDA1 and SCL1 (0.9 × VCC1 ≥ VO ≥ 900 mV) | tf1 | 13 | 32 | 48 | ns | 0.9 × VCC1 ≥ VO ≥ 900 mV, R1 = 1430 Ω, C1 = 40 pF | 20 |+| Output signal fall time, SDA2 and SCL2 (0.7 × VCC2 ≥ VO ≥ 0.3 × VCC2) | tf2 | 10 | 24 | 30 | ns | 0.7 × VCC2 ≥ VO ≥ 0.3 × VCC2, R2 = 143 Ω, C2 = 400 pF | 20 |+| Output signal fall time, SDA2 and SCL2 (0.9 × VCC2 ≥ VO ≥ 400 mV) | tf2 | 28 | 48 | 76 | ns | 0.9 × VCC2 ≥ VO ≥ 400 mV, R2 = 143 Ω, C2 = 400 pF | 20 |+| Low-to-high propagation delay, side 1 to side 2 | tpLH1-2 | | 21 | 28 | ns | VI = 535 mV, VO = 0.7 × VCC2, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF | 20 |+| High-to-low propagation delay, side 1 to side 2 | tpHL1-2 | | 51 | 70 | ns | VI = 550 mV, VO = 0.3 × VCC2, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF | 20 |+| Low-to-high propagation delay, side 2 to side 1 | tpLH2-1 | | 51 | 57 | ns | VI = 0.4 × VCC2, VO = 0.7 × VCC1, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF | 20 |+| High-to-low propagation delay, side 2 to side 1 | tpHL2-1 | | 60 | 88 | ns | VI = 0.4 × VCC2, VO = 0.3 × VCC1, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF | 20 |+| Pulse width distortion, side 1 to side 2 | PWD1-2 | | 30 | 45 | ns | /tpHL1-2, tpLH1-2/, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF | 20 |+| Pulse width distortion, side 2 to side 1 | PWD2-1 | | 10 | 34 | ns | /tpHL2-1, tpLH2-1/, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF | 20 | ## CAD (KiCad official) @@ -101,7 +112,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [TEXAS INSTRUMENTS datasheet](https://www.ti.com/lit/ds/symlink/iso1641.pdf) (58 pp, sha256 `48a61b97cdf889f7`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [TEXAS INSTRUMENTS datasheet](https://www.ti.com/lit/ds/symlink/iso1641.pdf) (58 pp, sha256 `48a61b97cdf889f7`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+24−24@@ -1,6 +1,6 @@ { "slug": "iso1641dwr",- "version": "0.1.2",+ "version": "0.1.3", "type": "component", "description": "TEXAS INSTRUMENTS Global Sourcing Parts, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "595-ISO1641DWR" }, "distributor_check": {- "checked_at": "2026-11-13T01:01:13Z",+ "checked_at": "2026-11-17T21:26:58Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-ISO1641DWRTR-ND",@@ -69,97 +69,97 @@ "number": "1", "name": "GND1", "type": "power_in",- "description": "Ground for side 1; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 1 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC1 and GND1." }, { "number": "2", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "3", "name": "VCC1", "type": "power_in",- "description": "Side 1 supply voltage, 3.0 V to 5.5 V recommended, with a 0.1-µF decoupling capacitor to GND1."+ "description": "Side 1 supply voltage, specified at 3.0 V to 5.5 V, to be decoupled with 0.1 µF to GND1." }, { "number": "4", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "5", "name": "SDA1", "type": "bidirectional",- "description": "Side 1 serial data input/output (bidirectional); side 1 bus load is limited to 80 pF and the output sinks 0.5 to 3.5 mA."+ "description": "Side 1 serial data input/output, an open-drain I2C line whose low-level output is VOL1 of 570 to 710 mV at 0.5 to 3.5 mA." }, { "number": "6", "name": "SCL1", "type": "input",- "description": "Side 1 serial clock input only on ISO1641 (unidirectional); input low threshold maximum is 480 mV and high threshold is 0.7 × VCC1 minimum."+ "description": "Side 1 serial clock input only on the ISO1641, since the clock channel is unidirectional and has no side 1 output." }, { "number": "7", "name": "GND1", "type": "power_in",- "description": "Ground for side 1; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 1 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC1 and GND1." }, { "number": "8", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "9", "name": "GND2", "type": "power_in",- "description": "Ground for side 2; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 2 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC2 and GND2." }, { "number": "10", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "11", "name": "SCL2", "type": "output",- "description": "Side 2 serial clock output only on ISO1641 (unidirectional, open-drain); sinks 0.5 to 50 mA with a maximum load of 400 pF."+ "description": "Side 2 open-drain serial clock output on the ISO1641, driving the I2C bus with up to 400 pF of load capacitance (C2)." }, { "number": "12", "name": "SDA2", "type": "bidirectional",- "description": "Side 2 serial data input/output (bidirectional, open-drain); sinks 0.5 to 50 mA with a maximum load of 400 pF, and is hot-swap protected while VCC2 is below UVLO."+ "description": "Side 2 serial data input/output, an open-drain I2C line rated for 50 mA sink current with up to 400 pF of load capacitance." }, { "number": "13", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "14", "name": "VCC2", "type": "power_in",- "description": "Side 2 supply voltage, 2.25 V to 5.5 V recommended, with a 0.1-µF decoupling capacitor to GND2."+ "description": "Side 2 supply voltage, specified at 2.25 V to 5.5 V, to be decoupled with 0.1 µF to GND2." }, { "number": "15", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "16", "name": "GND2", "type": "power_in",- "description": "Ground for side 2; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 2 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC2 and GND2." } ], "provenance": {@@ -173,11 +173,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Table 5-1 lists SCL1 and SCL2 as I/O for the shared ISO1640/ISO1641 table, but the ISO1641 text says; The datasheet gives no single-pin definition for the NC pins beyond 'No Connection'; they are typed ; Pin-type and description limits are the datasheet's ISO1641 values for the 16-DW package; the pin de"+ "extractor flagged: Pins GND1 (1, 7), GND2 (9, 16) and NC (2, 4, 8, 10, 13, 15) are each listed by the datasheet as a gr; Pin 6 (SCL1) is described as a unidirectional input and pin 11 (SCL2) as an output, per the ISO1641 " ], "pages_sent": 58,- "cost_usd": 0.2636,- "at": "2026-11-13T01:01:00"+ "cost_usd": 0.2616,+ "at": "2026-11-17T21:26:12" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/iso1641.pdf",@@ -214,7 +214,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -232,8 +232,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "ed11a315681bbdebd0efcb1cd07afb25c11bdea69a5eadfad57c2743d5fbfca2",- "checked": "2026-11-13",+ "sha256": "c165a2907565adaf426aae979b8ec8cd5b7112c9d8dba394a82205322f7641c2",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+27−25@@ -4,7 +4,7 @@ "slug": "iso1641dwr", "title": "ISO1641DWR", "brief": "TEXAS INSTRUMENTS Global Sourcing Parts, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.2",+ "version": "0.1.3", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "595-ISO1641DWR" }, "distributor_check": {- "checked_at": "2026-11-13T01:01:13Z",+ "checked_at": "2026-11-17T21:26:58Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-ISO1641DWRTR-ND",@@ -52,97 +52,97 @@ "number": "1", "name": "GND1", "type": "power_in",- "description": "Ground for side 1; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 1 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC1 and GND1." }, { "number": "2", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "3", "name": "VCC1", "type": "power_in",- "description": "Side 1 supply voltage, 3.0 V to 5.5 V recommended, with a 0.1-µF decoupling capacitor to GND1."+ "description": "Side 1 supply voltage, specified at 3.0 V to 5.5 V, to be decoupled with 0.1 µF to GND1." }, { "number": "4", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "5", "name": "SDA1", "type": "bidirectional",- "description": "Side 1 serial data input/output (bidirectional); side 1 bus load is limited to 80 pF and the output sinks 0.5 to 3.5 mA."+ "description": "Side 1 serial data input/output, an open-drain I2C line whose low-level output is VOL1 of 570 to 710 mV at 0.5 to 3.5 mA." }, { "number": "6", "name": "SCL1", "type": "input",- "description": "Side 1 serial clock input only on ISO1641 (unidirectional); input low threshold maximum is 480 mV and high threshold is 0.7 × VCC1 minimum."+ "description": "Side 1 serial clock input only on the ISO1641, since the clock channel is unidirectional and has no side 1 output." }, { "number": "7", "name": "GND1", "type": "power_in",- "description": "Ground for side 1; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 1 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC1 and GND1." }, { "number": "8", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "9", "name": "GND2", "type": "power_in",- "description": "Ground for side 2; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 2 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC2 and GND2." }, { "number": "10", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "11", "name": "SCL2", "type": "output",- "description": "Side 2 serial clock output only on ISO1641 (unidirectional, open-drain); sinks 0.5 to 50 mA with a maximum load of 400 pF."+ "description": "Side 2 open-drain serial clock output on the ISO1641, driving the I2C bus with up to 400 pF of load capacitance (C2)." }, { "number": "12", "name": "SDA2", "type": "bidirectional",- "description": "Side 2 serial data input/output (bidirectional, open-drain); sinks 0.5 to 50 mA with a maximum load of 400 pF, and is hot-swap protected while VCC2 is below UVLO."+ "description": "Side 2 serial data input/output, an open-drain I2C line rated for 50 mA sink current with up to 400 pF of load capacitance." }, { "number": "13", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "14", "name": "VCC2", "type": "power_in",- "description": "Side 2 supply voltage, 2.25 V to 5.5 V recommended, with a 0.1-µF decoupling capacitor to GND2."+ "description": "Side 2 supply voltage, specified at 2.25 V to 5.5 V, to be decoupled with 0.1 µF to GND2." }, { "number": "15", "name": "NC", "type": "unconnected",- "description": "No connection; leave unconnected."+ "description": "No connection; the datasheet lists this pin as not internally connected." }, { "number": "16", "name": "GND2", "type": "power_in",- "description": "Ground for side 2; all voltages are referenced to the local ground pin (GND1 or GND2)."+ "description": "Ground for side 2 of the isolator; the datasheet recommends a 0.1-µF decoupling capacitor between VCC2 and GND2." } ], "provenance": {@@ -156,11 +156,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Table 5-1 lists SCL1 and SCL2 as I/O for the shared ISO1640/ISO1641 table, but the ISO1641 text says; The datasheet gives no single-pin definition for the NC pins beyond 'No Connection'; they are typed ; Pin-type and description limits are the datasheet's ISO1641 values for the 16-DW package; the pin de"+ "extractor flagged: Pins GND1 (1, 7), GND2 (9, 16) and NC (2, 4, 8, 10, 13, 15) are each listed by the datasheet as a gr; Pin 6 (SCL1) is described as a unidirectional input and pin 11 (SCL2) as an output, per the ISO1641 " ], "pages_sent": 58,- "cost_usd": 0.2636,- "at": "2026-11-13T01:01:00"+ "cost_usd": 0.2616,+ "at": "2026-11-17T21:26:12" }, "datasheet": { "url": "https://www.ti.com/lit/ds/symlink/iso1641.pdf",@@ -197,7 +197,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -215,8 +215,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "ed11a315681bbdebd0efcb1cd07afb25c11bdea69a5eadfad57c2743d5fbfca2",- "checked": "2026-11-13",+ "sha256": "c165a2907565adaf426aae979b8ec8cd5b7112c9d8dba394a82205322f7641c2",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -910,5 +910,7 @@ ], "visibility": { "public": true- }+ },+ "description": "TEXAS INSTRUMENTS Global Sourcing Parts, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }