component
ISO1410BDWR
Public Made by Adomby adom
Texas Instruments RS-485/RS-422 ICs, SOIC-16-300mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "iso1410bdwr",+ "title": "ISO1410BDWR",+ "brief": "Texas Instruments RS-485/RS-422 ICs, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments RS-485/RS-422 ICs, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "comm-uart", "iso1410bdwr" ],+ "component": {+ "mpn": "ISO1410BDWR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16-300mil",+ "pin_count": 16,+ "category": "Comm/UART",+ "subcategory": "RS-485/RS-422 ICs",+ "datasheet": "https://www.ti.com/lit/ds/symlink/iso1410bdwr.pdf",+ "parts": {+ "symbol": "iso1410bdwr.kicad_sym",+ "footprint": "iso1410bdwr.kicad_mod",+ "model_3d": "iso1410bdwr.glb",+ "model_3d_step": "iso1410bdwr.step",+ "lbr": "iso1410bdwr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VCC1",+ "type": "power_in",+ "description": "Logic-side power supply. 1.71-1.89 V for 1.8-V operation, or 2.25-5.5 V for 2.5/3.3/5-V operation. Bypass to GND1 with a local decoupling capacitor."+ },+ {+ "number": "2",+ "name": "GND1",+ "type": "power_in",+ "description": "Ground connection for VCC1 (logic side). Must be tied to the same ground as pin 8 on the PCB."+ },+ {+ "number": "3",+ "name": "R",+ "type": "output",+ "description": "Receiver output on the logic side. CMOS output that drives the MCU/FPGA RX pin at VCC1 levels."+ },+ {+ "number": "4",+ "name": "RE",+ "type": "input",+ "description": "Receiver enable (active low). Drive low to enable the receiver output on R; drive high or leave open to disable/tri-state R. Referenced to VCC1/GND1 logic levels."+ },+ {+ "number": "5",+ "name": "DE",+ "type": "input",+ "description": "Driver enable (active high). Drive high to enable the RS-485 bus driver outputs (A/B); low or open disables the driver, tri-stating the bus pins."+ },+ {+ "number": "6",+ "name": "D",+ "type": "input",+ "description": "Driver input on the logic side. CMOS input from the MCU/FPGA TX pin; sampled at VCC1 logic levels when DE is asserted."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Device functionality is not affected if this pin is connected to supply or ground on the PCB."+ },+ {+ "number": "8",+ "name": "GND1",+ "type": "power_in",+ "description": "Ground connection for VCC1 (logic side). Must be tied together with pin 2 to GND1 on the PCB."+ },+ {+ "number": "9",+ "name": "GND2",+ "type": "power_in",+ "description": "Ground connection for VCC2 (bus side, isolated). Must be tied together with pin 15 to GND2 on the PCB."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Device functionality is not affected if this pin is connected to supply or ground on the PCB."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Device functionality is not affected if this pin is connected to supply or ground on the PCB."+ },+ {+ "number": "12",+ "name": "A",+ "type": "bidirectional",+ "description": "RS-485 bus-side non-inverting I/O. Driver non-inverting output when DE is high; receiver non-inverting input when RE is low. Withstands \u22127 V to +12 V common-mode; \u00b118 V absolute max w.r.t. GND2."+ },+ {+ "number": "13",+ "name": "B",+ "type": "bidirectional",+ "description": "RS-485 bus-side inverting I/O. Driver inverting output when DE is high; receiver inverting input when RE is low. Same common-mode and absolute-max range as A."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Device functionality is not affected if this pin is connected to supply or ground on the PCB."+ },+ {+ "number": "15",+ "name": "GND2",+ "type": "power_in",+ "description": "Ground connection for VCC2 (bus side, isolated). Must be tied together with pin 9 to GND2 on the PCB."+ },+ {+ "number": "16",+ "name": "VCC2",+ "type": "power_in",+ "description": "Transceiver-side (bus-side) power supply, 3.0-5.5 V. Isolated from VCC1 across the reinforced isolation barrier. Bypass to GND2 with a local decoupling capacitor."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/iso1410bdwr.pdf",+ "pages": 49,+ "sha256": "36c9ab5123938800",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-16-300mil",+ "Category": "Comm/UART",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "iso1410bdwr"+ ],+ "discovery_pitch": "ISO1410BDWR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/iso1410bdwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }