ISO1211

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "iso1211",+  "title": "ISO1211",+  "brief": "TI isolated 24 V digital-input receiver, SOIC-8. IEC 61131-2 Type 1/3, single resistor sets current. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "TI isolated 24 V digital-input receiver, SOIC-8. IEC 61131-2 Type 1/3, single resistor sets current. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",@@ -12,6 +15,122 @@     "soic-8",     "texas-instruments"   ],+  "component": {+    "mpn": "ISO1211",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Interface",+    "subcategory": "Isolated digital input",+    "datasheet": "https://www.ti.com/lit/ds/symlink/iso1211.pdf",+    "parts": {+      "symbol": "iso1211.kicad_sym",+      "footprint": "iso1211.kicad_mod",+      "model_3d": "iso1211.glb",+      "model_3d_step": "iso1211.step",+      "lbr": "iso1211.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VCC1",+        "type": "power_in",+        "description": "Power supply, side 1 (logic/controller side). Operating range 2.25V to 5.5V; supports 2.5V, 3.3V, and 5V controllers. Absolute max 6V."+      },+      {+        "number": "2",+        "name": "EN",+        "type": "input",+        "description": "Output enable. OUT is enabled when EN is high or open; OUT is high-impedance when EN is low. In noisy applications, tie EN to VCC1."+      },+      {+        "number": "3",+        "name": "OUT",+        "type": "output",+        "description": "Channel output (logic-side digital output representing the field-side input state). Push-pull, referenced to VCC1/GND1. IOH up to -4mA (VCC1=5V); IOL up to 4mA (VCC1=5V)."+      },+      {+        "number": "4",+        "name": "GND1",+        "type": "power_in",+        "description": "Ground connection for VCC1 (logic/controller side ground reference)."+      },+      {+        "number": "5",+        "name": "SUB",+        "type": "passive",+        "description": "Internal connection to input chip substrate. For good thermal performance, connect this pin to a small 2mm x 2mm floating plane on the board. Do NOT connect this floating plane to FGND or any other signal or plane."+      },+      {+        "number": "6",+        "name": "FGND",+        "type": "power_in",+        "description": "Field-side ground reference for the isolated field input."+      },+      {+        "number": "7",+        "name": "IN",+        "type": "input",+        "description": "Field-side current input. Accepts 9V to 300V DC/AC digital input signals through an external current-limit resistor; \u00b160V absolute rating with reverse polarity protection."+      },+      {+        "number": "8",+        "name": "SENSE",+        "type": "input",+        "description": "Field-side voltage sense pin. Used together with IN pin and external resistors to set the accurate current limit for IEC 61131-2 Type 1/2/3 compliance. Minimum pulse width at SENSE is 150ns."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/iso1211.pdf",+        "pages": 47,+        "sha256": "41e0bc7308dd4e0c",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "Digital-input receiver (24 V field)",+      "Standard": "IEC 61131-2 Type 1 / 2 / 3",+      "Current setting": "Single external resistor",+      "Input": "Defined thresholds + hysteresis",+      "Output": "Logic level (OUT)",+      "Supply": "2.25-5.5 V (logic side)",+      "Package": "SOIC-8"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "iso1211",+    "digital input receiver",+    "24v plc input",+    "iec 61131 input"+  ],+  "discovery_pitch": "TI ISO1211 isolated 24 V digital-input receiver (SOIC-8) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -29,10 +148,5 @@     "docs/iso1211-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file