ISL3172EIBZ-T

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="ISL3172EIBZ-T">@@ -108,7 +120,13 @@         <connect gate="G$1" pin="A/Y" pad="6"/>         <connect gate="G$1" pin="GND" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="ISL3172EIBZ-T" constant="no"/>+          <attribute name="MANUFACTURER" value="RENESAS" constant="no"/>+          <attribute name="LCSC_PN" value="C43154" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>

@@ -26,31 +26,33 @@       "model_3d_step": "isl3172eibz-t.step",       "lbr": "isl3172eibz-t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C43154"+    },     "pins": [       {         "number": "1",         "name": "RO",         "type": "output",-        "description": "Receiver output. RO is high when A-B ≥ -50mV and low when A-B ≤ -200mV. RO is high (full fail-safe) when the A and B inputs are open, shorted, or terminated and undriven. High-Z when /RE is high."+        "description": "Receiver output. RO is high when A-B \u2265 -50mV and low when A-B \u2264 -200mV. RO is high (full fail-safe) when the A and B inputs are open, shorted, or terminated and undriven. High-Z when /RE is high."       },       {         "number": "2",         "name": "/RE",         "type": "input",-        "description": "Active-low receiver output enable. RO is enabled when /RE is low; RO is high-impedance when /RE is high. If not required, tie to GND directly or through a 1kΩ to 3kΩ resistor. VIH ≥ 2V, VIL ≤ 0.8V."+        "description": "Active-low receiver output enable. RO is enabled when /RE is low; RO is high-impedance when /RE is high. If not required, tie to GND directly or through a 1k\u03a9 to 3k\u03a9 resistor. VIH \u2265 2V, VIL \u2264 0.8V."       },       {         "number": "3",         "name": "DE",         "type": "input",-        "description": "Driver output enable. Driver outputs Y and Z are enabled when DE is high and are high-impedance when DE is low. If not required, tie to VCC through a 1kΩ to 3kΩ resistor. Driving both DE=0 and /RE=1 puts the part into shutdown mode."+        "description": "Driver output enable. Driver outputs Y and Z are enabled when DE is high and are high-impedance when DE is low. If not required, tie to VCC through a 1k\u03a9 to 3k\u03a9 resistor. Driving both DE=0 and /RE=1 puts the part into shutdown mode."       },       {         "number": "4",         "name": "DI",         "type": "input",-        "description": "Driver input. A low on DI forces Y low and Z high; a high on DI forces Y high and Z low. Logic input thresholds VIH ≥ 2V, VIL ≤ 0.8V."+        "description": "Driver input. A low on DI forces Y low and Z high; a high on DI forces Y high and Z low. Logic input thresholds VIH \u2265 2V, VIL \u2264 0.8V."       },       {         "number": "5",@@ -62,19 +64,19 @@         "number": "6",         "name": "A/Y",         "type": "bidirectional",-        "description": "±15kV IEC61000 ESD protected RS-485/RS-422 non-inverting bus pin. Acts as the receiver non-inverting input when DE = 0; acts as the driver non-inverting output (Y) when DE = 1. Common-mode range -7V to +12V."+        "description": "\u00b115kV IEC61000 ESD protected RS-485/RS-422 non-inverting bus pin. Acts as the receiver non-inverting input when DE = 0; acts as the driver non-inverting output (Y) when DE = 1. Common-mode range -7V to +12V."       },       {         "number": "7",         "name": "B/Z",         "type": "bidirectional",-        "description": "±15kV IEC61000 ESD protected RS-485/RS-422 inverting bus pin. Acts as the receiver inverting input when DE = 0; acts as the driver inverting output (Z) when DE = 1. Common-mode range -7V to +12V."+        "description": "\u00b115kV IEC61000 ESD protected RS-485/RS-422 inverting bus pin. Acts as the receiver inverting input when DE = 0; acts as the driver inverting output (Z) when DE = 1. Common-mode range -7V to +12V."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "System power supply input, 3.0V to 3.6V. Bypass with a 0.1µF ceramic capacitor to GND close to the pin. Quiescent supply current 510µA typical (800µA max); shutdown current 10nA typical."+        "description": "System power supply input, 3.0V to 3.6V. Bypass with a 0.1\u00b5F ceramic capacitor to GND close to the pin. Quiescent supply current 510\u00b5A typical (800\u00b5A max); shutdown current 10nA typical."       }     ],     "provenance": {