← Commit history
README.mdadded+107@@ -0,0 +1,107 @@+# IS31FL3248-TQLS4-TR++**ISSI Integrated Silicon Solution** · LED Drivers · TQFP-64(7x7)++IS31FL3248-TQLS4-TR from ISSI Integrated Silicon Solution, in a TQFP-64(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT44 | output | Constant-current sink output channel 44 (RGB group 15, B15). Tolerates up to 16V; up to 33 mA (VCC=5V) or 23 mA (VCC=3V) per channel. |+| 2 | OUT45 | output | Constant-current sink output channel 45 (RGB group 16, R16). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 3 | OUT46 | output | Constant-current sink output channel 46 (RGB group 16, G16). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 4 | OUT47 | output | Constant-current sink output channel 47 (RGB group 16, B16). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 5 | NC | unconnected | No connect. Leave floating or tie per board layout. |+| 6 | SCK/SCLK | input | Serial clock input. Acts as the SPI SCK or VSB SCLK; supports up to 33 MHz. |+| 7 | MOSI/DI | input | Serial data input. Acts as the SPI MOSI or VSB DI input. |+| 8 | CS/LAT | input | SPI chip-select (active low) or VSB latch signal. |+| 9 | SYNC/GCLK | input | Synchronization/global clock input. Used to synchronize PWM timing across cascaded devices. |+| 10 | NC | unconnected | No connect. Leave floating or tie per board layout. |+| 11 | OUT0 | output | Constant-current sink output channel 0 (RGB group 1, R1). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 12 | OUT1 | output | Constant-current sink output channel 1 (RGB group 1, G1). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 13 | OUT2 | output | Constant-current sink output channel 2 (RGB group 1, B1). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 14 | OUT3 | output | Constant-current sink output channel 3 (RGB group 2, R2). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 15 | OUT4 | output | Constant-current sink output channel 4 (RGB group 2, G2). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 16 | OUT5 | output | Constant-current sink output channel 5 (RGB group 2, B2). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 17 | OUT6 | output | Constant-current sink output channel 6 (RGB group 3, R3). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 18 | OUT7 | output | Constant-current sink output channel 7 (RGB group 3, G3). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 19 | OUT8 | output | Constant-current sink output channel 8 (RGB group 3, B3). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 20 | OUT9 | output | Constant-current sink output channel 9 (RGB group 4, R4). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 21 | OUT10 | output | Constant-current sink output channel 10 (RGB group 4, G4). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 22 | OUT11 | output | Constant-current sink output channel 11 (RGB group 4, B4). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 23 | OUT12 | output | Constant-current sink output channel 12 (RGB group 5, R5). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 24 | OUT13 | output | Constant-current sink output channel 13 (RGB group 5, G5). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 25 | OUT14 | output | Constant-current sink output channel 14 (RGB group 5, B5). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 26 | OUT15 | output | Constant-current sink output channel 15 (RGB group 6, R6). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 27 | OUT16 | output | Constant-current sink output channel 16 (RGB group 6, G6). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 28 | OUT17 | output | Constant-current sink output channel 17 (RGB group 6, B6). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 29 | OUT18 | output | Constant-current sink output channel 18 (RGB group 7, R7). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 30 | OUT19 | output | Constant-current sink output channel 19 (RGB group 7, G7). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 31 | NC | unconnected | No connect. Leave floating or tie per board layout. |+| 32 | INTB | output | Interrupt output (active low, open-drain type). Asserts when an interrupt event (e.g. LED open/short, thermal) occurs; read status via the DEh command. May be left floating if the interrupt function is not used. |+| 33 | MISO/DO | output | Serial data output. Acts as the SPI MISO or VSB DO output for chain/read-back operations. |+| 34 | BLANK | input | Blank control input. BLANK low forces all output channels off and initializes the PWM timing controller; BLANK high starts PWM timing and channels are controlled by the PWM timing controller. |+| 35 | NC | unconnected | No connect. Leave floating or tie per board layout. |+| 36 | OUT20 | output | Constant-current sink output channel 20 (RGB group 7, B7). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 37 | OUT21 | output | Constant-current sink output channel 21 (RGB group 8, R8). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 38 | OUT22 | output | Constant-current sink output channel 22 (RGB group 8, G8). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 39 | OUT23 | output | Constant-current sink output channel 23 (RGB group 8, B8). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 40 | SENSE | input | LED short-detect reference voltage. Should be connected to the LED-supply rail VLED+ (up to ~16V) so short-detect can compare (VSENSE − VOUT) against the internal threshold (~0.6V). |+| 41 | OUT24 | output | Constant-current sink output channel 24 (RGB group 9, R9). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 42 | OUT25 | output | Constant-current sink output channel 25 (RGB group 9, G9). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 43 | OUT26 | output | Constant-current sink output channel 26 (RGB group 9, B9). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 44 | OUT27 | output | Constant-current sink output channel 27 (RGB group 10, R10). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 45 | NC | unconnected | No connect. Leave floating or tie per board layout. |+| 46 | ISET | passive | Full-scale output current programming pin. Connect a resistor RISET (typ. 5.6kΩ) from ISET to GND to set IOUT_max. VISET ≈ 1.19V at RISET=5.6kΩ. |+| 47 | GND | power_in | Ground return. Tie the exposed thermal pad to this net for best thermal performance. |+| 48 | VCC | power_in | Logic/analog supply, 3.0V to 5.5V (absolute max +6.0V). Bypass with 1μF and 0.1μF capacitors close to the pin. |+| 49 | OUT28 | output | Constant-current sink output channel 28 (RGB group 10, G10). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 50 | OUT29 | output | Constant-current sink output channel 29 (RGB group 10, B10). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 51 | OUT30 | output | Constant-current sink output channel 30 (RGB group 11, R11). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 52 | OUT31 | output | Constant-current sink output channel 31 (RGB group 11, G11). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 53 | OUT32 | output | Constant-current sink output channel 32 (RGB group 11, B11). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 54 | OUT33 | output | Constant-current sink output channel 33 (RGB group 12, R12). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 55 | OUT34 | output | Constant-current sink output channel 34 (RGB group 12, G12). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 56 | OUT35 | output | Constant-current sink output channel 35 (RGB group 12, B12). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 57 | OUT36 | output | Constant-current sink output channel 36 (RGB group 13, R13). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 58 | OUT37 | output | Constant-current sink output channel 37 (RGB group 13, G13). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 59 | OUT38 | output | Constant-current sink output channel 38 (RGB group 13, B13). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 60 | OUT39 | output | Constant-current sink output channel 39 (RGB group 14, R14). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 61 | OUT40 | output | Constant-current sink output channel 40 (RGB group 14, G14). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 62 | OUT41 | output | Constant-current sink output channel 41 (RGB group 14, B14). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 63 | OUT42 | output | Constant-current sink output channel 42 (RGB group 15, R15). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| 64 | OUT43 | output | Constant-current sink output channel 43 (RGB group 15, G15). Tolerates up to 16V; up to 33 mA (VCC=5V). |+| EP | GND | power_in | Exposed thermal pad on package underside. Must be connected to GND for thermal dissipation and electrical reference. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | ISSI Integrated Silicon Solution |+| Package | TQFP-64(7x7) |+| Category | LED Drivers |+| Pins | 65 |++## Ordering variants++Same part, different packaging or reel option.++- `IS31FL3248-TQLS4-TR`+- `IS31FL3248-TQLS4-TRQFLS4-TR`++## CAD (KiCad official)++- Symbol: `IS31FL3248-TQLS4-TR`+- Footprint: `Package_QFP:TQFP-64_7x7mm_P0.4mm`+- 3D model: TQFP-64(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [ISSI Integrated Silicon Solution datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604315359239688192) (None pp, sha256 `04c5d938194ec74d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/is31fl3248-tqls4-tr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "is31fl3248-tqls4-tr",+ "version": "0.1.0",+ "type": "component",+ "description": "ISSI Integrated Silicon Solution LED Drivers, TQFP-64(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "is31fl3248-tqls4-tr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "is31fl3248-tqls4-tr.kicad_sym",+ "is31fl3248-tqls4-tr.kicad_mod",+ "is31fl3248-tqls4-tr.glb",+ "is31fl3248-tqls4-tr.step",+ "is31fl3248-tqls4-tr.lbr",+ "docs/hero.png",+ "docs/is31fl3248-tqls4-tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}