← Commit history

is25lp032d-jnle-tr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·d8dfaf0e15 · ·parent 4fd676f
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "IS25LP032D-JNLE-TR",+    "manufacturer": "ISSI Integrated Silicon Solution",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "NOR FLASH",+    "parts": {+      "symbol": "is25lp032d-jnle-tr.kicad_sym",+      "footprint": "is25lp032d-jnle-tr.kicad_mod",+      "model_3d": "is25lp032d-jnle-tr-etched.glb",+      "model_3d_plain": "is25lp032d-jnle-tr.glb",+      "model_3d_step": "is25lp032d-jnle-tr-etched.step",+      "model_3d_step_plain": "is25lp032d-jnle-tr.step",+      "lbr": "is25lp032d-jnle-tr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "CE#",+        "type": "input",+        "description": "Chip Enable (active-low). Drive low to select the device and bring it out of standby; drive high to deselect and place outputs in high-Z / standby (typ. 10 µA). After power-up, CE# must transition high-to-low before any new instruction is accepted."+      },+      {+        "number": "2",+        "name": "SO/IO1",+        "type": "bidirectional",+        "description": "Serial Data Output in Standard SPI (data/status clocked out on SCK falling edge). In Dual/Quad/QPI modes this pin becomes bidirectional IO1 for both instruction/address input and data output. Compatible with SPI modes 0 and 3."+      },+      {+        "number": "3",+        "name": "WP#/IO2",+        "type": "bidirectional",+        "description": "Write Protect (active-low) in Standard/Dual SPI: when SRWD=1 and WP# is low, the Status Register bits SRWD/QE/BP3-BP0 are hardware write-protected. In Quad SPI / QPI (QE=1) this pin becomes bidirectional data line IO2 and the WP# function is unavailable."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Return for Vcc."+      },+      {+        "number": "5",+        "name": "SI/IO0",+        "type": "bidirectional",+        "description": "Serial Data Input in Standard SPI (instructions/addresses/data clocked in on SCK rising edge). In Dual/Quad/QPI modes this pin becomes bidirectional IO0 for both input and output. Compatible with SPI modes 0 and 3."+      },+      {+        "number": "6",+        "name": "SCK",+        "type": "input",+        "description": "Serial Clock input for all SPI/QPI transfers (up to 133 MHz STR, 66 MHz DTR). Provides the synchronized reference clock for both input and output timing."+      },+      {+        "number": "7",+        "name": "HOLD#/RESET#/IO3",+        "type": "bidirectional",+        "description": "Multi-function pin. With QE=0 it acts as HOLD# (P7=0, default) or RESET# (P7=1) selected by the P7 bit of the Read Register. HOLD# pauses serial activity while CE# is low, placing SO in high-Z; RESET# forces the device into reset when driven low. When QE=1 (Quad/QPI mode) it becomes bidirectional data line IO3."+      },+      {+        "number": "8",+        "name": "Vcc",+        "type": "power_in",+        "description": "Device core power supply. IS25LP032D: 2.30 V to 3.60 V (IS25WP variant: 1.65 V to 1.95 V). Typical active read current 4 mA; standby 10 µA; deep power-down 1 µA."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}