← Commit history

Initial commit: component/is25lp032d-jnle-tr

Ray ·2d5a7764c3 ·
2 files changed +102
README.mdadded+68
@@ -0,0 +1,68 @@+# IS25LP032D-JNLE-TR++**ISSI Integrated Silicon Solution** · NOR FLASH · SOIC-8++IS25LP032D-JNLE-TR from ISSI Integrated Silicon Solution, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CE# | input | Chip Enable (active-low). Drive low to select the device and bring it out of standby; drive high to deselect and place outputs in high-Z / standby (typ. 10 µA). After power-up, CE# must transition high-to-low before any new instruction is accepted. |+| 2 | SO/IO1 | bidirectional | Serial Data Output in Standard SPI (data/status clocked out on SCK falling edge). In Dual/Quad/QPI modes this pin becomes bidirectional IO1 for both instruction/address input and data output. Compatible with SPI modes 0 and 3. |+| 3 | WP#/IO2 | bidirectional | Write Protect (active-low) in Standard/Dual SPI: when SRWD=1 and WP# is low, the Status Register bits SRWD/QE/BP3-BP0 are hardware write-protected. In Quad SPI / QPI (QE=1) this pin becomes bidirectional data line IO2 and the WP# function is unavailable. |+| 4 | GND | power_in | Device ground reference. Return for Vcc. |+| 5 | SI/IO0 | bidirectional | Serial Data Input in Standard SPI (instructions/addresses/data clocked in on SCK rising edge). In Dual/Quad/QPI modes this pin becomes bidirectional IO0 for both input and output. Compatible with SPI modes 0 and 3. |+| 6 | SCK | input | Serial Clock input for all SPI/QPI transfers (up to 133 MHz STR, 66 MHz DTR). Provides the synchronized reference clock for both input and output timing. |+| 7 | HOLD#/RESET#/IO3 | bidirectional | Multi-function pin. With QE=0 it acts as HOLD# (P7=0, default) or RESET# (P7=1) selected by the P7 bit of the Read Register. HOLD# pauses serial activity while CE# is low, placing SO in high-Z; RESET# forces the device into reset when driven low. When QE=1 (Quad/QPI mode) it becomes bidirectional data line IO3. |+| 8 | Vcc | power_in | Device core power supply. IS25LP032D: 2.30 V to 3.60 V (IS25WP variant: 1.65 V to 1.95 V). Typical active read current 4 mA; standby 10 µA; deep power-down 1 µA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | ISSI Integrated Silicon Solution |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `IS25LP032D-JNLE-TR`+- `IS25LP032D-JNLE-TRQNLE`+- `IS25LP032D-JNLE-TRJNLA3`+- `IS25LP032D-JNLE-TRQNLA3`+- `IS25LP032D-JNLE-TRJBLE`+- `IS25LP032D-JNLE-TRQBLE`+- `IS25LP032D-JNLE-TRJBLA3`+- `IS25LP032D-JNLE-TRQBLA3`+- `IS25LP032D-JNLE-TRJTLE`+- `IS25LP032D-JNLE-TRJTLA3`+- `IS25LP032D-JNLE-TRQTLA3`+- `IS25LP032D-JNLE-TRJELE`+- `IS25LP032D-JNLE-TRJELA3`+- `IS25LP032D-JNLE-TRJKLE`+- `IS25LP032D-JNLE-TRJKLA3`+- `IS25LP032D-JNLE-TRJLLA3`+- `IS25LP032D-JNLE-TRRMLE`+- `IS25LP032D-JNLE-TRRMLA3`+- `IS25LP032D-JNLE-TRRGLE`+- `IS25LP032D-JNLE-TRRGLA3`+- `IS25LP032D-JNLE-TRRHLE`+- `IS25LP032D-JNLE-TRRHLA3`++## CAD (KiCad official)++- Symbol: `IS25LP032D-JNLE-TR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [ISSI Integrated Silicon Solution datasheet](docs/is25lp032d-jnle-tr-datasheet.pdf) (None pp, sha256 `2777d8e9f25bc2c3`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/is25lp032d-jnle-tr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "is25lp032d-jnle-tr",+  "version": "0.1.0",+  "type": "component",+  "description": "ISSI Integrated Silicon Solution NOR FLASH, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "is25lp032d-jnle-tr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "is25lp032d-jnle-tr.kicad_sym",+    "is25lp032d-jnle-tr.kicad_mod",+    "is25lp032d-jnle-tr.glb",+    "is25lp032d-jnle-tr.step",+    "is25lp032d-jnle-tr.lbr",+    "docs/hero.png",+    "docs/is25lp032d-jnle-tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file