← Commit history

Initial commit: component/ip5306

Ray ·a9dc2650f7 ·
2 files changed +78
README.mdadded+44
@@ -0,0 +1,44 @@+# IP5306++**INJOINIC** · Battery Management · ESOP-8++IP5306 from INJOINIC, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Charger 5V input pin. Recommended input voltage 4.75-5.5V (typ 5V). Input under-voltage lockout rising threshold ~4.5V with 200mV hysteresis. Provides adapter power to the internal synchronous buck charger. |+| 2 | LED1 | output | Battery state-of-charge (SOC) LED indicator pin 1. Sinks/sources ~4 mA to drive an indicator LED. Multiplexed with the L1 line used in 1/2/3/4-LED configurations to display SOC and charging status. |+| 3 | LED2 | output | Battery SOC LED indicator pin 2 (~4 mA drive). Together with LED1/LED3 it forms the 3-pin matrix that drives up to 4 SOC LEDs. |+| 4 | LED3 | output | Battery SOC LED indicator pin 3 (~4 mA drive). Third line of the matrixed LED indicator; unused/tied to BAT in some LED-count configurations. |+| 5 | KEY | input | ON/OFF push-button input, also multiplexed as torch/flashlight lighting driver. Short push (30 ms - 2 s) turns on SOC LEDs and enables the boost; long push (>2 s) turns everything off; double short-push toggles the flashlight LED. |+| 6 | BAT | power_in | Battery voltage sense pin and battery connection for the switching charger/boost. Operating range 3.0-4.4V (typ 3.7V Li-ion). Target charge voltage 4.2V (4.20/4.30/4.35/4.40V options), recharge threshold 4.1V. |+| 7 | SW | passive | DC-DC switch node; connect the single power inductor (typ 1 uH) between SW and BAT. Carries the synchronous buck/boost switching waveform (500 kHz typical) and up to 2.1 A load current. |+| 8 | VOUT | power_out | DC-DC 5V output pin (boost output, typ 5.10 V from VBAT=3.7V) delivering up to 2.1 A. Also serves as the USB Vbus output; supports output over-current and short-circuit protection. |+| 9 | PowerPAD | power_in | Exposed thermal pad on the underside of the eSOP-8 package. Must be connected to the ground plane; serves as the device ground return and primary thermal path for the integrated power FETs. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | INJOINIC |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `IP5306`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [INJOINIC datasheet](docs/ip5306-datasheet.pdf) (11 pp, sha256 `76818e77bf2002bf`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ip5306-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ip5306",+  "version": "0.1.0",+  "type": "component",+  "description": "INJOINIC Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ip5306"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ip5306.kicad_sym",+    "ip5306.kicad_mod",+    "ip5306.glb",+    "ip5306.step",+    "ip5306.lbr",+    "docs/hero.png",+    "docs/ip5306-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file