← Commit history
README.mdadded+66@@ -0,0 +1,66 @@+# IP5189T++**INJOINIC** · Battery Management · QFN-24-EP(4x4)++IP5189T from INJOINIC, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | L2 | output | LED battery-level indicator driver pin L2 (2-20 mA sink/source, typ 10 mA). |+| 2 | L3 | output | LED battery-level indicator driver pin L3 (2-20 mA sink/source, typ 10 mA). |+| 3 | VDD | power_out | Internal LDO output, 3.1V. Bypass to ground with a decoupling capacitor. |+| 4 | VTHS | input | Battery chemistry / cell platform selection input (selects 4.2V / 4.35V / 4.4V CV target). |+| 5 | RSET | input | Battery internal-resistance compensation pin; sets fuel-gauge curve fine-trim via external resistor. |+| 6 | NTC | input | Battery NTC thermistor sense input for temperature protection during charging. |+| 7 | AGND | power_in | Analog ground reference. |+| 8 | KEY | input | Pushbutton input (active low to GND). Short press (>80ms, <2s) turns on boost/LED display; double short press within 1s turns off boost and lights; long press (>2s) toggles flashlight LED. |+| 9 | VBAT | power_in | Boost input / Li-ion battery positive terminal (3.0-4.4V operating). Also acts as charger output to battery. |+| 10 | NC | unconnected | No connect. Leave floating or tie per PCB layout. |+| 11 | ICHG | input | External resistor sets charge current per ICHG = 1.2V / R * 100000 (e.g. 120kΩ→1A, 56kΩ→2.1A, NC→default 1.8A). |+| 12 | PGND | power_in | Power ground return for the DC-DC switch stage. |+| 13 | LX | passive | DCDC switch node. Pins 13, 14, 15 are tied together and connect to the 1µH boost/charge inductor. |+| 14 | LX | passive | DCDC switch node (parallel with pins 13, 15). |+| 15 | LX | passive | DCDC switch node (parallel with pins 13, 14). |+| 16 | VOUT | power_out | 5V boost output (5.0-5.15V @ 2.1A, up to 2.1A continuous). Pins 16, 17 tied together for USB Type-A output. |+| 17 | VOUT | power_out | 5V boost output (parallel with pin 16). |+| 18 | DP | bidirectional | USB Type-A output D+ line; used for DCP handshake / adapter recognition on the output port. |+| 19 | DM | bidirectional | USB Type-A output D- line; used for DCP handshake / adapter recognition on the output port. |+| 20 | VIN | power_in | 5V USB charging input (4.65-5.5V, up to 2.2A). Pins 20, 21 tied together for Micro-B/Type-C VBUS input. |+| 21 | VIN | power_in | 5V USB charging input (parallel with pin 20). |+| 22 | LIGHT | output | Flashlight LED driver, open-drain output (typ 30 mA sink). Toggled by long-press on KEY. |+| 23 | VSET | input | Battery-type / LED display count configuration input. |+| 24 | L1 | output | LED battery-level indicator driver pin L1 (2-20 mA sink/source, typ 10 mA). |+| 25 | GND | power_in | Exposed thermal pad (EPAD). Power ground and heatsink; must be soldered to the PCB GND plane for thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | INJOINIC |+| Package | QFN-24-EP(4x4) |+| Category | PMIC |+| Pins | 25 |++## Ordering variants++- `IP5189T`+- `IP5189T_YYY`++## CAD (KiCad official)++- Symbol: `IP5189T`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [INJOINIC datasheet](docs/ip5189t-datasheet.pdf) (15 pp, sha256 `a13a7ce16e0c1601`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ip5189t-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "ip5189t",+ "version": "0.1.0",+ "type": "component",+ "description": "INJOINIC Battery Management, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "ip5189t"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ip5189t.kicad_sym",+ "ip5189t.kicad_mod",+ "ip5189t.glb",+ "ip5189t.step",+ "ip5189t.lbr",+ "docs/hero.png",+ "docs/ip5189t-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}