← Commit history

Set visibility: public

Ray ·eae2ee3f8b · ·parent f828fad
1 file changed +10−7
page.json+10−7
@@ -38,13 +38,13 @@         "number": "2",         "name": "RG",         "type": "passive",-        "description": "Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain G = 1 + (6 k\u03a9 / RG); leave open for G = 1."+        "description": "Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain G = 1 + (6 kΩ / RG); leave open for G = 1."       },       {         "number": "3",         "name": "RG",         "type": "passive",-        "description": "Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain G = 1 + (6 k\u03a9 / RG); leave open for G = 1."+        "description": "Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain G = 1 + (6 kΩ / RG); leave open for G = 1."       },       {         "number": "4",@@ -56,25 +56,25 @@         "number": "5",         "name": "-VS",         "type": "power_in",-        "description": "Negative supply rail. For dual supply operation \u00b14 V to \u00b118 V, or tie to ground for single-supply operation (8 V to 36 V on +VS). Bypass to ground with a 100 nF capacitor close to the pin."+        "description": "Negative supply rail. For dual supply operation ±4 V to ±18 V, or tie to ground for single-supply operation (8 V to 36 V on +VS). Bypass to ground with a 100 nF capacitor close to the pin."       },       {         "number": "6",         "name": "REF",         "type": "input",-        "description": "Reference input. Sets the output DC level: VO = G\u00b7(V+IN - V-IN) + VREF. Must be driven by a low-impedance source; input range is (-VS)-0.5 V to (+VS)+0.5 V."+        "description": "Reference input. Sets the output DC level: VO = G·(V+IN - V-IN) + VREF. Must be driven by a low-impedance source; input range is (-VS)-0.5 V to (+VS)+0.5 V."       },       {         "number": "7",         "name": "OUT",         "type": "output",-        "description": "Amplifier output. Rail-to-rail-ish voltage swing to within 150 mV of the supplies with RL = 10 k\u03a9; short-circuit current \u00b134 mA typical; drives loads to VS/2 continuously."+        "description": "Amplifier output. Rail-to-rail-ish voltage swing to within 150 mV of the supplies with RL = 10 kΩ; short-circuit current ±34 mA typical; drives loads to VS/2 continuously."       },       {         "number": "8",         "name": "+VS",         "type": "power_in",-        "description": "Positive supply rail. Single supply 8 V to 36 V, or dual supply \u00b14 V to \u00b118 V referenced to -VS. Bypass to ground (or to -VS) with a 100 nF capacitor close to the pin."+        "description": "Positive supply rail. Single supply 8 V to 36 V, or dual supply ±4 V to ±18 V referenced to -VS. Bypass to ground (or to -VS) with a 100 nF capacitor close to the pin."       }     ],     "provenance": {@@ -156,5 +156,8 @@     "docs/ina849dr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file