ina326ea

@@ -0,0 +1,48 @@+# INA326EA++**Texas Instruments** · Instrumentation OpAmps · VSSOP-8++INA326EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | R1 | passive | Gain-set resistor terminal. External R1 is connected between pins 1 and 8 to set the input-stage gain. Minimize stray capacitance on this node for best high-frequency CMR; recommended R1 ≥ 2kΩ. |+| 2 | VIN- | input | Inverting analog input. Rail-to-rail input range extending from (V-) - 0.02V to (V+) + 0.1V. Diode-clamped to supply rails; external signals must be current-limited to ±10mA if they can swing more than 0.5V beyond the rails. |+| 3 | VIN+ | input | Non-inverting analog input. Rail-to-rail input range from (V-) - 0.02V to (V+) + 0.1V. Diode-clamped to supply rails; external signals must be current-limited to ±10mA if they can swing more than 0.5V beyond the rails. |+| 4 | V- | power_in | Negative supply pin. Tie to GND for single-supply operation (+2.7V to +5.5V) or to the negative rail for dual-supply operation (e.g. -2.5V). A 0.1µF bypass capacitor from pin 7 (V+) to pin 4 (V-) placed close to the device is strongly recommended. |+| 5 | R2/IACOMMON | passive | Output reference terminal / low side of external R2. This node (IACOMMON) sets the output offset reference; the output voltage is referenced to IACOMMON. R2 (typically 100kΩ) connects between pins 5 and 6 to set the output-stage gain. Must be sufficiently filtered to avoid nonlinearity with large output swings. |+| 6 | VO | output | Amplifier output. Rail-to-rail, swings to within 10mV of the supply rails. Continuous short-circuit protected. Connects to the top of external R2 and to the optional output filter (RO/CO) that combines with C2 for a 2-pole response. |+| 7 | V+ | power_in | Positive supply pin. Single-supply operation from +2.7V to +5.5V, or +2.5V in split-supply operation. Absolute maximum +5.5V. A 0.1µF bypass capacitor from pin 7 (V+) to pin 4 (V-) placed close to the device is strongly recommended. |+| 8 | R1 | passive | Gain-set resistor terminal. External R1 connects between pins 1 and 8 to set the input-stage gain (G = 2·R2/R1). Minimize stray capacitance on this node for best high-frequency CMR; R1 must be ≥ 2kΩ. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8 |+| Category | Op-amp/Cmp |+| Pins | 8 |++## Ordering variants++- `INA326EA/250`+- `INA326EA/2K5`++## CAD (KiCad official)++- Symbol: `INA326EA`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina326ea.pdf) (None pp, sha256 `65b97a2e89a1ca1a`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina326ea-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "ina326ea",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Instrumentation OpAmps, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "op-amp-cmp",+    "ina326ea"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina326ea.kicad_sym",+    "ina326ea.kicad_mod",+    "ina326ea.glb",+    "ina326ea.step",+    "ina326ea.lbr",+    "docs/hero.png",+    "docs/ina326ea-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file