← Commit history

Initial commit: component/ina302a3ipwr

Ray ·2652bfa979 ·
2 files changed +90
README.mdadded+56
@@ -0,0 +1,56 @@+# INA302A3IPWR++**Texas Instruments** · Current Sense Amplifiers · TSSOP-14++INA302A3IPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VS | power_in | Analog power supply input, 2.7 V to 5.5 V. Bypass to GND with a 0.1 µF ceramic capacitor placed close to the pin. Maximum supply current is 950 µA. |+| 2 | OUT | output | Analog output voltage proportional to the differential input voltage across IN+/IN- multiplied by the amplifier gain (100 V/V for A3 version). Output is referenced to the REF pin. |+| 3 | LIMIT1 | input | ALERT1 threshold limit input. Sets the trip threshold for comparator 1 via an external resistor divider; see Setting Alert Thresholds section. Range 0 V to VS. |+| 4 | REF | input | Reference voltage input for the current-sense amplifier output, 0 V to VS. Sets the zero-current output voltage; typically driven from a precision reference or from VS/2 for bidirectional current sensing. |+| 5 | GND | power_in | Analog ground return for the supply and internal reference circuitry. |+| 6 | LATCH1 | input | Digital input selecting transparent or latched mode for the ALERT1 output. Transparent mode tracks the comparator state; latched mode holds the ALERT1 asserted until reset. |+| 7 | LATCH2 | input | Digital input selecting transparent or latched mode for the ALERT2 output. Transparent mode tracks the comparator state; latched mode holds the ALERT2 asserted until reset. |+| 8 | NC | unconnected | No internal connection. Leave floating or tie to GND per board layout preference. |+| 9 | LIMIT2 | input | ALERT2 threshold limit input. Sets the trip threshold for comparator 2 via an external resistor divider; see Setting Alert Thresholds section. Range 0 V to VS. |+| 10 | DELAY | input | Delay timing input for comparator 2. An external capacitor to GND sets the ALERT2 response delay from 2 µs to 10 s; see Alert Outputs section. |+| 11 | ALERT2 | output | Open-drain, active-low alert output driven by comparator 2. For the INA302 this is a second overlimit alert; for the INA303 (window comparator) this is the underlimit alert. Requires an external pull-up resistor (e.g., 10 kΩ) to a supply ≤6 V. |+| 12 | ALERT1 | output | Open-drain, active-low overlimit alert output driven by comparator 1 (response time <1 µs). Requires an external pull-up resistor (e.g., 10 kΩ) to a supply ≤6 V. |+| 13 | IN- | input | Inverting current-sense input. Connect to the load side of the external current-sense (shunt) resistor. Common-mode range -0.1 V to +36 V, independent of VS. |+| 14 | IN+ | input | Non-inverting current-sense input. Connect to the supply side of the external current-sense (shunt) resistor. Common-mode range -0.1 V to +36 V, independent of VS. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-14 |+| Category | Amplifiers/Comparators |+| Pins | 14 |++## Ordering variants++Same part, different packaging or reel option.++- `INA302A3IPWR`++## CAD (KiCad official)++- Symbol: `INA302A3IPWR`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina302) (None pp, sha256 `1610232399ad3a07`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina302a3ipwr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ina302a3ipwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Current Sense Amplifiers, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "amplifiers-comparators",+    "ina302a3ipwr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina302a3ipwr.kicad_sym",+    "ina302a3ipwr.kicad_mod",+    "ina302a3ipwr.glb",+    "ina302a3ipwr.step",+    "ina302a3ipwr.lbr",+    "docs/hero.png",+    "docs/ina302a3ipwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file