component
INA300AIDGSR
Public Made by Adomby adom
Texas Instruments Comparators, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+47@@ -0,0 +1,47 @@+# INA300AIDGSR++**Texas Instruments** · Comparators · VSSOP-10-0.5mm++INA300AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN+ | input | Analog input; connect to the supply side of the shunt resistor. |+| 2 | IN- | input | Analog input; connect to the load side of the shunt resistor. |+| 3 | LIMIT | input | Analog alert threshold limit input that sets the current-limit threshold, as described in Setting The Current-Limit Threshold. |+| 4 | ENABLE | input | Digital input that selects enable or disable mode. |+| 5 | ALERT | output | Active-low, open-drain digital output that signals an overlimit condition. |+| 6 | LATCH | input | Digital input that selects transparent or latch mode for the alert output. |+| 7 | DELAY | input | Digital input that selects the response time. |+| 8 | GND | power_in | Analog ground. |+| 9 | VS | power_in | Power supply input, 2.7 V to 5.5 V. |+| 10 | HYS | input | Digital input that sets the hysteresis, as described in Selectable Hysteresis. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-10-0.5mm |+| Category | Amplifiers/Comparators |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `INA300AIDGSR`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)+- 3D model files: `ina300aidgsr-etched.step` / `ina300aidgsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina300aidgsr.step` / `ina300aidgsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina300) (44 pp, sha256 `223b3de044bfa2a1`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina300aidgsr-datasheet.pdf)
page.jsonadded+212@@ -0,0 +1,212 @@+{+ "slug": "ina300aidgsr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Comparators, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ina300aidgsr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ina300aidgsr.kicad_sym",+ "ina300aidgsr.kicad_mod",+ "ina300aidgsr.glb",+ "ina300aidgsr.step",+ "ina300aidgsr.lbr",+ "docs/hero.png",+ "docs/ina300aidgsr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ina300aidgsr-hero.glb",+ "ina300aidgsr-hero.overlay.json"+ ],+ "component": {+ "mpn": "INA300AIDGSR",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-10-0.5mm",+ "pin_count": 10,+ "category": "Amplifiers/Comparators",+ "subcategory": "Comparators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ina300",+ "parts": {+ "symbol": "ina300aidgsr.kicad_sym",+ "footprint": "ina300aidgsr.kicad_mod",+ "model_3d": "ina300aidgsr-hero.glb",+ "model_3d_plain": "ina300aidgsr.glb",+ "model_3d_step": "ina300aidgsr-etched.step",+ "model_3d_step_plain": "ina300aidgsr.step",+ "lbr": "ina300aidgsr.lbr"+ },+ "distributor_links": {+ "lcsc": "C529558",+ "digikey": "296-47259-2-ND",+ "mouser": "595-INA300AIDGSR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T20:32:02Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-47259-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-INA300AIDGSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN+",+ "type": "input",+ "description": "Analog input; connect to the supply side of the shunt resistor."+ },+ {+ "number": "2",+ "name": "IN–",+ "type": "input",+ "description": "Analog input; connect to the load side of the shunt resistor."+ },+ {+ "number": "3",+ "name": "LIMIT",+ "type": "input",+ "description": "Analog alert threshold limit input that sets the current-limit threshold, as described in Setting The Current-Limit Threshold."+ },+ {+ "number": "4",+ "name": "ENABLE",+ "type": "input",+ "description": "Digital input that selects enable or disable mode."+ },+ {+ "number": "5",+ "name": "ALERT",+ "type": "output",+ "description": "Active-low, open-drain digital output that signals an overlimit condition."+ },+ {+ "number": "6",+ "name": "LATCH",+ "type": "input",+ "description": "Digital input that selects transparent or latch mode for the alert output."+ },+ {+ "number": "7",+ "name": "DELAY",+ "type": "input",+ "description": "Digital input that selects the response time."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "9",+ "name": "VS",+ "type": "power_in",+ "description": "Power supply input, 2.7 V to 5.5 V."+ },+ {+ "number": "10",+ "name": "HYS",+ "type": "input",+ "description": "Digital input that sets the hysteresis, as described in Selectable Hysteresis."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The DGS top-view figure (Figure 5-2) text extraction is scrambled, so pin numbers were taken from th; The Pin Functions table describes a thermal pad only for the WSON (DSQ) package; the VSSOP (DGS) pac"+ ],+ "pages_sent": 7,+ "cost_usd": 0.0497,+ "at": "2026-10-08T20:31:44"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ina300",+ "pages": 44,+ "sha256": "223b3de044bfa2a1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ina300aidgsr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina300aidgsr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9382b929dab507b6a895df0f45001ffce54108bfb5f9c10cd27b9bd1db75ad63",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}