component
INA250A3QPWRQ1
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# INA250A3QPWRQ1++**Texas Instruments** · Current Sense Amplifiers · TSSOP-16++INA250A3QPWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN- | input | Analog input connected to the load side; connect to load. |+| 2 | IN- | input | Analog input connected to the load side; connect to load. |+| 3 | IN- | input | Analog input connected to the load side; connect to load. |+| 4 | SH- | output | Kelvin connection to the internal shunt; connect to VIN- if no filtering is needed, otherwise see Figure 7-4 for filter recommendations. |+| 5 | VIN- | power_in | Voltage input from the load side of the shunt resistor. |+| 6 | GND | power_in | Analog ground. |+| 7 | REF | input | Reference voltage input, which must be between 0 V and VS (up to 18 V). |+| 8 | GND | power_in | Analog ground. |+| 9 | OUT | output | Analog output providing the output voltage. |+| 10 | VS | power_in | Device power supply, 2.7 V to 36 V. |+| 11 | GND | power_in | Analog ground. |+| 12 | VIN+ | power_in | Voltage input from the supply side of the shunt resistor. |+| 13 | SH+ | output | Kelvin connection to the internal shunt; connect to VIN+ if no filtering is needed, otherwise see Figure 7-4 for filter recommendations. |+| 14 | IN+ | input | Analog input connected to the supply side; connect to supply. |+| 15 | IN+ | input | Analog input connected to the supply side; connect to supply. |+| 16 | IN+ | input | Analog input connected to the supply side; connect to supply. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Amplifiers/Comparators |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `INA250A3QPWRQ1`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `ina250a3qpwrq1-etched.step` / `ina250a3qpwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina250a3qpwrq1.step` / `ina250a3qpwrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina250-q1) (36 pp, sha256 `6b0b96729787fe24`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina250a3qpwrq1-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "ina250a3qpwrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Current Sense Amplifiers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ina250a3qpwrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ina250a3qpwrq1.kicad_sym",+ "ina250a3qpwrq1.kicad_mod",+ "ina250a3qpwrq1.glb",+ "ina250a3qpwrq1.step",+ "ina250a3qpwrq1.lbr",+ "docs/hero.png",+ "docs/ina250a3qpwrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ina250a3qpwrq1-hero.glb",+ "ina250a3qpwrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "INA250A3QPWRQ1",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Amplifiers/Comparators",+ "subcategory": "Current Sense Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ina250-q1",+ "parts": {+ "symbol": "ina250a3qpwrq1.kicad_sym",+ "footprint": "ina250a3qpwrq1.kicad_mod",+ "model_3d": "ina250a3qpwrq1-hero.glb",+ "model_3d_plain": "ina250a3qpwrq1.glb",+ "model_3d_step": "ina250a3qpwrq1-etched.step",+ "model_3d_step_plain": "ina250a3qpwrq1.step",+ "lbr": "ina250a3qpwrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2058381",+ "digikey": "296-46586-2-ND",+ "mouser": "595-INA250A3QPWRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T22:12:32Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-46586-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-INA250A3QPWRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN-",+ "type": "input",+ "description": "Analog input connected to the load side; connect to load."+ },+ {+ "number": "2",+ "name": "IN-",+ "type": "input",+ "description": "Analog input connected to the load side; connect to load."+ },+ {+ "number": "3",+ "name": "IN-",+ "type": "input",+ "description": "Analog input connected to the load side; connect to load."+ },+ {+ "number": "4",+ "name": "SH-",+ "type": "output",+ "description": "Kelvin connection to the internal shunt; connect to VIN- if no filtering is needed, otherwise see Figure 7-4 for filter recommendations."+ },+ {+ "number": "5",+ "name": "VIN-",+ "type": "power_in",+ "description": "Voltage input from the load side of the shunt resistor."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "7",+ "name": "REF",+ "type": "input",+ "description": "Reference voltage input, which must be between 0 V and VS (up to 18 V)."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "9",+ "name": "OUT",+ "type": "output",+ "description": "Analog output providing the output voltage."+ },+ {+ "number": "10",+ "name": "VS",+ "type": "power_in",+ "description": "Device power supply, 2.7 V to 36 V."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "12",+ "name": "VIN+",+ "type": "power_in",+ "description": "Voltage input from the supply side of the shunt resistor."+ },+ {+ "number": "13",+ "name": "SH+",+ "type": "output",+ "description": "Kelvin connection to the internal shunt; connect to VIN+ if no filtering is needed, otherwise see Figure 7-4 for filter recommendations."+ },+ {+ "number": "14",+ "name": "IN+",+ "type": "input",+ "description": "Analog input connected to the supply side; connect to supply."+ },+ {+ "number": "15",+ "name": "IN+",+ "type": "input",+ "description": "Analog input connected to the supply side; connect to supply."+ },+ {+ "number": "16",+ "name": "IN+",+ "type": "input",+ "description": "Analog input connected to the supply side; connect to supply."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package confirmed: the ordering addendum (page 29) lists INA250A3QPWRQ1 as TSSOP (PW), 16 pins, 2000; Pin numbers come from the Table 5-1 pin function list on page 3. The top-view figure (Figure 5-1) te; Pin types are mapped to KiCad classes from the datasheet's 'Analog input/output' labels: analog inpu"+ ],+ "pages_sent": 7,+ "cost_usd": 0.052,+ "at": "2026-10-07T22:12:15"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ina250-q1",+ "pages": 36,+ "sha256": "6b0b96729787fe24",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ina250a3qpwrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina250a3qpwrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9edd07a7f288e2efdde4d5b604a307c8713824def93cb0ce7da7136dea0d3ffb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}