← Commit history
ina250a1pwr: specified limits as data (metadata.characteristics, 54 rows from the datasheet)
2 files changed
+717−1
README.md+61@@ -34,6 +34,67 @@ INA250A1PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions e | Category | Amplifiers/Comparators | | Pins | 16 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Common-mode input range | VCM | -0.1 | | 36 | V | | 5 |+| Common-mode rejection (INA250A1) | CMR | 94 | 102 | | dB | VIN+ = 0 V to 36 V, TA = –40°C to 125°C | 5 |+| Offset current, RTI (INA250A1) | IOS | -100 | 15 | 100 | mA | ISENSE = 0 A | 5 |+| RTI offset vs temperature | dIOS/dT | | 25 | 250 | μA/°C | TA = –40°C to 125°C | 5 |+| Power supply rejection | PSR | -1 | 0.03 | 1 | mA/V | VS = 2.7 V to 36 V, TA = –40°C to 125°C | 5 |+| Input bias current | IB | -35 | 28 | 35 | μA | IB+, IB-, ISENSE = 0 A | 5 |+| Reference input range | VREF | 0 | | 18 | V | Printed as 0 to (VS) up to 18 V; reference cannot exceed 18 V (footnote 3) | 5 |+| Shunt resistance (SH+ to SH–), equivalent with onboard amplifier | RSHUNT | 1.998 | 2 | 2.002 | mΩ | Equivalent resistance when used with onboard amplifier | 5 |+| Shunt resistance used as stand-alone resistor | RSHUNT | 1.8 | 2 | 2.2 | mΩ | Used as stand-alone resistor; not intended for this use (footnote 7) | 5 |+| Maximum continuous current | ISENSE | -15 | | 15 | A | TA = –40°C to 85°C | 5 |+| Shunt short time overload | | -0.05 | | 0.05 | % | ISENSE = 30 A for 5 seconds | 5 |+| Shunt thermal shock | | -0.1 | | 0.1 | % | –65°C to 150°C, 500 cycles | 5 |+| Shunt resistance to solder heat | | -0.1 | | 0.1 | % | 260°C solder, 10 s | 5 |+| Shunt high temperature exposure | | -0.15 | | 0.15 | % | 1000 hours, TA = 150°C | 5 |+| Shunt cold temperature storage | | -0.025 | | 0.025 | % | 24 hours, TA = –65°C | 5 |+| System gain error | | -0.3 | 0.05 | 0.3 | % | ISENSE = –10 A to 10 A, TA = 25°C | 6 |+| System gain error over temperature | | -0.75 | | 0.75 | % | ISENSE = –10 A to 10 A, TA = –40°C to 125°C | 6 |+| Nonlinearity error | | -0.03 | | 0.03 | % | ISENSE = 0.5 A to 10 A | 6 |+| Maximum capacitive load | | | | 1 | nF | No sustained oscillation | 6 |+| Swing to VS power-supply rail | | | -0.1 | -0.2 | V | RL = 10 kΩ to GND; printed as (VS) – 0.1 and (VS) – 0.2 V, relative to VS | 6 |+| Swing to GND | | | 25 | 50 | mV | RL = 10 kΩ to GND; relative to (VGND) | 6 |+| Operating supply voltage | VS | 2.7 | | 36 | V | | 6 |+| Quiescent current | IQ | | 200 | 300 | μA | TA = –40°C to 125°C | 6 |+| Specified temperature range | | -40 | | 125 | °C | | 6 |+| Supply voltage | VS | | | 40 | V | | 4 |+| Analog input current, continuous | | -15 | | 15 | A | Continuous current | 4 |+| Analog inputs IN+, IN– common-mode | | -0.3 | | 40 | V | Referenced to GND | 4 |+| Analog inputs VIN+, VIN– common-mode | | -0.3 | | 40 | V | Referenced to GND | 4 |+| Analog inputs VIN+ – VIN– differential | | -40 | | 40 | V | Differential (VIN+) – (VIN–) | 4 |+| Analog input REF | | -0.3 | | | V | Referenced to GND; upper limit printed as VS + 0.3 V | 4 |+| Analog outputs SH+, SH– common-mode | | -0.3 | | 40 | V | Referenced to GND | 4 |+| Analog output OUT | | -0.3 | | | V | Referenced to GND; upper limit printed as (VS + 0.3) up to 18 V | 4 |+| Operating free-air temperature | TA | -55 | | 150 | °C | Operating | 4 |+| Junction temperature | TJ | | | 150 | °C | | 4 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |+| Common-mode input voltage | VCM | 0 | | 36 | V | | 4 |+| Operating supply voltage | VS | 2.7 | | 36 | V | | 4 |+| Operating free-air temperature | TA | -40 | | 125 | °C | | 4 |+| Shunt resistance tolerance | | | | 0.1 | % | Feature bullet: 分流电阻容差 0.1% (maximum) | 1 |+| Gain (INA250A1) | G | | 200 | | mV/A | | 6 |+| Gain drift | | | | 45 | ppm/°C | TA = –40°C to 125°C | 6 |+| Resistor temperature coefficient | | | | 15 | ppm/°C | TA = –40°C to 125°C | 5 |+| Resistor temperature coefficient | | | | 50 | ppm/°C | TA = –40°C to 0°C | 5 |+| Resistor temperature coefficient | | | | 10 | ppm/°C | TA = 0°C to 125°C | 5 |+| Package resistance IN+ to IN– | | | 4.5 | | mΩ | | 5 |+| Output impedance | RO | | 1.5 | | Ω | | 6 |+| Bandwidth (INA250A1) | BW | | 50 | | kHz | CL = 10 pF | 6 |+| Slew rate | SR | | 0.2 | | V/μs | CL = 10 pF | 6 |+| Voltage noise density (INA250A1) | | | 51 | | nV/√Hz | RTI | 6 |+| Junction-to-ambient thermal resistance | RθJA | | 104.4 | | °C/W | PW (TSSOP) 16 pins | 4 |+| Junction-to-case (top) thermal resistance | RθJC(top) | | 42.3 | | °C/W | PW (TSSOP) 16 pins | 4 |+| Junction-to-board thermal resistance | RθJB | | 48.5 | | °C/W | PW (TSSOP) 16 pins | 4 |+| Junction-to-top characterization parameter | ψJT | | 4.5 | | °C/W | PW (TSSOP) 16 pins | 4 |+| Junction-to-board characterization parameter | ψJB | | 48 | | °C/W | PW (TSSOP) 16 pins | 4 |+ ## CAD (KiCad official) - Symbol: `INA250A1PWR`
page.json+656−1@@ -225,6 +225,661 @@ "Package": "TSSOP-16", "Category": "Amplifiers/Comparators", "Pins": "16"+ },+ "characteristics": {+ "version": 1,+ "source": "datasheet",+ "datasheet_sha256": "6cba5d06f12fea59",+ "rows": [+ {+ "name": "Common-mode input range",+ "symbol": "VCM",+ "kind": "electrical",+ "unit": "V",+ "min": -0.1,+ "typ": null,+ "max": 36,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Common-mode rejection (INA250A1)",+ "symbol": "CMR",+ "kind": "electrical",+ "unit": "dB",+ "min": 94,+ "typ": 102,+ "max": null,+ "conditions": "VIN+ = 0 V to 36 V, TA = –40°C to 125°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Offset current, RTI (INA250A1)",+ "symbol": "IOS",+ "kind": "electrical",+ "unit": "mA",+ "min": -100,+ "typ": 15,+ "max": 100,+ "conditions": "ISENSE = 0 A",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "RTI offset vs temperature",+ "symbol": "dIOS/dT",+ "kind": "electrical",+ "unit": "μA/°C",+ "min": null,+ "typ": 25,+ "max": 250,+ "conditions": "TA = –40°C to 125°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Power supply rejection",+ "symbol": "PSR",+ "kind": "electrical",+ "unit": "mA/V",+ "min": -1,+ "typ": 0.03,+ "max": 1,+ "conditions": "VS = 2.7 V to 36 V, TA = –40°C to 125°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Input bias current",+ "symbol": "IB",+ "kind": "electrical",+ "unit": "μA",+ "min": -35,+ "typ": 28,+ "max": 35,+ "conditions": "IB+, IB-, ISENSE = 0 A",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Reference input range",+ "symbol": "VREF",+ "kind": "electrical",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 18,+ "conditions": "Printed as 0 to (VS) up to 18 V; reference cannot exceed 18 V (footnote 3)",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shunt resistance (SH+ to SH–), equivalent with onboard amplifier",+ "symbol": "RSHUNT",+ "kind": "electrical",+ "unit": "mΩ",+ "min": 1.998,+ "typ": 2,+ "max": 2.002,+ "conditions": "Equivalent resistance when used with onboard amplifier",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shunt resistance used as stand-alone resistor",+ "symbol": "RSHUNT",+ "kind": "electrical",+ "unit": "mΩ",+ "min": 1.8,+ "typ": 2,+ "max": 2.2,+ "conditions": "Used as stand-alone resistor; not intended for this use (footnote 7)",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Maximum continuous current",+ "symbol": "ISENSE",+ "kind": "electrical",+ "unit": "A",+ "min": -15,+ "typ": null,+ "max": 15,+ "conditions": "TA = –40°C to 85°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shunt short time overload",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": -0.05,+ "typ": null,+ "max": 0.05,+ "conditions": "ISENSE = 30 A for 5 seconds",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shunt thermal shock",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": -0.1,+ "typ": null,+ "max": 0.1,+ "conditions": "–65°C to 150°C, 500 cycles",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shunt resistance to solder heat",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": -0.1,+ "typ": null,+ "max": 0.1,+ "conditions": "260°C solder, 10 s",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shunt high temperature exposure",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": -0.15,+ "typ": null,+ "max": 0.15,+ "conditions": "1000 hours, TA = 150°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shunt cold temperature storage",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": -0.025,+ "typ": null,+ "max": 0.025,+ "conditions": "24 hours, TA = –65°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "System gain error",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": -0.3,+ "typ": 0.05,+ "max": 0.3,+ "conditions": "ISENSE = –10 A to 10 A, TA = 25°C",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "System gain error over temperature",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": -0.75,+ "typ": null,+ "max": 0.75,+ "conditions": "ISENSE = –10 A to 10 A, TA = –40°C to 125°C",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Nonlinearity error",+ "symbol": "",+ "kind": "electrical",+ "unit": "%",+ "min": -0.03,+ "typ": null,+ "max": 0.03,+ "conditions": "ISENSE = 0.5 A to 10 A",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Maximum capacitive load",+ "symbol": "",+ "kind": "electrical",+ "unit": "nF",+ "min": null,+ "typ": null,+ "max": 1,+ "conditions": "No sustained oscillation",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Swing to VS power-supply rail",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": -0.1,+ "max": -0.2,+ "conditions": "RL = 10 kΩ to GND; printed as (VS) – 0.1 and (VS) – 0.2 V, relative to VS",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Swing to GND",+ "symbol": "",+ "kind": "electrical",+ "unit": "mV",+ "min": null,+ "typ": 25,+ "max": 50,+ "conditions": "RL = 10 kΩ to GND; relative to (VGND)",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Operating supply voltage",+ "symbol": "VS",+ "kind": "electrical",+ "unit": "V",+ "min": 2.7,+ "typ": null,+ "max": 36,+ "conditions": "",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Quiescent current",+ "symbol": "IQ",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": 200,+ "max": 300,+ "conditions": "TA = –40°C to 125°C",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Specified temperature range",+ "symbol": "",+ "kind": "electrical",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 125,+ "conditions": "",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Supply voltage",+ "symbol": "VS",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 40,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Analog input current, continuous",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "A",+ "min": -15,+ "typ": null,+ "max": 15,+ "conditions": "Continuous current",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Analog inputs IN+, IN– common-mode",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 40,+ "conditions": "Referenced to GND",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Analog inputs VIN+, VIN– common-mode",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 40,+ "conditions": "Referenced to GND",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Analog inputs VIN+ – VIN– differential",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -40,+ "typ": null,+ "max": 40,+ "conditions": "Differential (VIN+) – (VIN–)",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Analog input REF",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "Referenced to GND; upper limit printed as VS + 0.3 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Analog outputs SH+, SH– common-mode",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 40,+ "conditions": "Referenced to GND",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Analog output OUT",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "Referenced to GND; upper limit printed as (VS + 0.3) up to 18 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Operating free-air temperature",+ "symbol": "TA",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -55,+ "typ": null,+ "max": 150,+ "conditions": "Operating",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction temperature",+ "symbol": "TJ",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": null,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Storage temperature",+ "symbol": "Tstg",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -65,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Common-mode input voltage",+ "symbol": "VCM",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 0,+ "typ": null,+ "max": 36,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Operating supply voltage",+ "symbol": "VS",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 2.7,+ "typ": null,+ "max": 36,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Operating free-air temperature",+ "symbol": "TA",+ "kind": "recommended_operating",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 125,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Shunt resistance tolerance",+ "symbol": "",+ "kind": "tolerance",+ "unit": "%",+ "min": null,+ "typ": null,+ "max": 0.1,+ "conditions": "Feature bullet: 分流电阻容差 0.1% (maximum)",+ "source_page": 1,+ "source": "datasheet"+ },+ {+ "name": "Gain (INA250A1)",+ "symbol": "G",+ "kind": "electrical",+ "unit": "mV/A",+ "min": null,+ "typ": 200,+ "max": null,+ "conditions": "",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Gain drift",+ "symbol": "",+ "kind": "temperature_coefficient",+ "unit": "ppm/°C",+ "min": null,+ "typ": null,+ "max": 45,+ "conditions": "TA = –40°C to 125°C",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Resistor temperature coefficient",+ "symbol": "",+ "kind": "temperature_coefficient",+ "unit": "ppm/°C",+ "min": null,+ "typ": null,+ "max": 15,+ "conditions": "TA = –40°C to 125°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Resistor temperature coefficient",+ "symbol": "",+ "kind": "temperature_coefficient",+ "unit": "ppm/°C",+ "min": null,+ "typ": null,+ "max": 50,+ "conditions": "TA = –40°C to 0°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Resistor temperature coefficient",+ "symbol": "",+ "kind": "temperature_coefficient",+ "unit": "ppm/°C",+ "min": null,+ "typ": null,+ "max": 10,+ "conditions": "TA = 0°C to 125°C",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Package resistance IN+ to IN–",+ "symbol": "",+ "kind": "electrical",+ "unit": "mΩ",+ "min": null,+ "typ": 4.5,+ "max": null,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Output impedance",+ "symbol": "RO",+ "kind": "electrical",+ "unit": "Ω",+ "min": null,+ "typ": 1.5,+ "max": null,+ "conditions": "",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Bandwidth (INA250A1)",+ "symbol": "BW",+ "kind": "electrical",+ "unit": "kHz",+ "min": null,+ "typ": 50,+ "max": null,+ "conditions": "CL = 10 pF",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Slew rate",+ "symbol": "SR",+ "kind": "electrical",+ "unit": "V/μs",+ "min": null,+ "typ": 0.2,+ "max": null,+ "conditions": "CL = 10 pF",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Voltage noise density (INA250A1)",+ "symbol": "",+ "kind": "electrical",+ "unit": "nV/√Hz",+ "min": null,+ "typ": 51,+ "max": null,+ "conditions": "RTI",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-ambient thermal resistance",+ "symbol": "RθJA",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 104.4,+ "max": null,+ "conditions": "PW (TSSOP) 16 pins",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-case (top) thermal resistance",+ "symbol": "RθJC(top)",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 42.3,+ "max": null,+ "conditions": "PW (TSSOP) 16 pins",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board thermal resistance",+ "symbol": "RθJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 48.5,+ "max": null,+ "conditions": "PW (TSSOP) 16 pins",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-top characterization parameter",+ "symbol": "ψJT",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 4.5,+ "max": null,+ "conditions": "PW (TSSOP) 16 pins",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board characterization parameter",+ "symbol": "ψJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 48,+ "max": null,+ "conditions": "PW (TSSOP) 16 pins",+ "source_page": 4,+ "source": "datasheet"+ }+ ] } }, "variants": [],@@ -266,4 +921,4 @@ "visibility": { "public": true }-}+}